Loading manuals...

Zoom Cable Modem/Router 5363 Manual


Zoom Cable Modem/Router 5363 Manual Image

MODEL 5363

This Quick Start describes how to connect Model 5363 to a cable modem service, and how Ethernet-capable and wireless computers, smartphones, tablets, smart TVs, and other devices can use Model 5363 for Internet access.

Package Contents

  • Cable modem / Router
  • Power cube
  • Ethernet RJ-45 cable
  • This Quick Start flyer

Before installing your cable modem, please read this.

You need to connect the cable modem to a cable modem service that uses any of the popular DOCSIS standards – 3.0, 2.0, or 1.1. If you need to get cable modem service, please speak with your cable service provider.

Your cable service provider will need to know your modem’s MAC ADDRESS, which is printed on a label on the bottom of your modem. You provide this when you order cable modem service, or by calling the cable company before or after installing your modem, or by entering your CM MAC ADDRESS on an account setup web page that appears when you first connect your cable modem to your provider’s network. Normally your cable service provider will tell you when to provide the CM MAC address. You may also be asked for your cable modem’s model name and number, which is ZOOM 5363. If you need the modem’s serial number, you can find it near the MAC address on the label.

  1. Disconnect the coaxial cable from the old cable modem and connect it to your Zoom modem. If the coaxial cable has a screw-on connector, turn the connector clockwise when tightening the cable onto the Zoom cable modem.
  2. If there’s an Ethernet cable plugged into the old cable modem, unplug the Ethernet cable from the old cable modem and plug it into any of the Zoom cable modem’s LAN jacks.
  3. Connect the Zoom power cube between the Zoom cable modem and a live power jack. DO NOT use your old cable modem’s power cube on your Zoom cable modem.
  4. What you do next depends on your cable modem company. Typically you can call your cable modem company’s support department and tell them your cable modem is hooked up. They’ll normally ask for the information mentioned above in “Before Installing Your Cable Modem.” Some cable companies also let you just open the browser on a computer that’s connected to the Zoom cable modem. A setup page comes up, and you follow the instructions.
  5. Go to “Now that your cable modem is connected, do this.” below.

1 Connect a “live” coaxial cable from your cable service provider to your cable modem. (If you’re not sure a cable is live, you can see whether you get a good TV signal when that cable is used with a working TV set-top box.) Here are some ways you can get the live cable:

You have a cable TV cable (“coaxial cable”) with a male connector on the end that isn’t connected to anything. This cable may be coming out of a wall or connected to a cable TV jack.
There’s a cable TV jack in your wall. You can connect a cable TV “coaxial cable” between that jack and your cable modem. You may have a coaxial cable, possibly one that came with a cable modem starter kit from your cable service provider. If you don’t have a coaxial cable, you can get one at most electronics stores. You want one with a screw-in male F connector at each end, with a length that works for your installation.

If you don’t have an available cable TV cable or wall jack, use a coaxial “T adapter” or “splitter” available from most electronics retailers. (see example at right). Make sure you get one designed for cable modems and/or cable TV. These typically have one female IN jack and two female OUT jacks.  You can disconnect a  live cable from your TV set-top box and screw it into the IN jack of the splitter.  Then connect one coaxial cable from an OUT jack to your TV set-top box and another coaxial cable from the other OUT jack to your cable modem. You can see that this approach uses one splitter and 2 additional coaxial cables, each of which has male connectors on each end. Some electronics retailers carry the Zoom Cable Modem Connection Kit which has an excellent splitter and 2 coaxial cables packaged together at a reasonable price. You can also purchase splitters and coaxial cable separately if you prefer to do that, perhaps because you need a  special length of coaxial cable.

2  Connect the supplied Ethernet cable between any cable modem LAN jack and a computer’s Ethernet jack. We recommend that you do this even if you later plan to disconnect this computer. If connecting the Ethernet cable to a computer is difficult or impossible, you can make a wireless connection as discussed below in “Connecting Model 5363 wirelessly to some device.”

3 Connect the Zoom power cube between the Zoom cable modem and a live power jack.

4  What you do next depends on your cable modem company. Typically you can call your cable modem company’s support department and tell them your cable modem is hooked up. They’ll normally ask for the information mentioned above in “Before installing your cable modem please read this.” Some cable companies also let you just open the browser on a computer that’s connected to the Zoom cable modem. A setup page comes up automatically, and you follow the instructions.
5  Go to “Now that your cable modem is connected, do this.” below.

When your cable modem first connects to your cable service provider, allow 5 to 30 minutes for the cable modem to connect to the network. The cable modem uses this time to locate and connect to the appropriate channels for communication. You’ll see the DS (downstream), US (upstream), and Online modem lights flashing until the Online light stays steady green to signal success. (Blue US/DS LEDs indicate channel bonding.)

To check that your cable modem is working, open your browser and go to a familiar Web site. If it works, congratulations! Installation is complete for a single PC.  For Internet access using a smartphone, tablet, or other wireless device, see “Connecting Model 5363 wirelessly to some device.”
If you want to connect additional computers or other devices using the modem/router’s Ethernet/LAN ports, please see Read This Only if You Are Connecting additional computers and/or other devices to Model 5363’s Ethernet/LAN ports.
If you are playing a multi-player game over the Internet, you may need to setup the modem in a special way for the game to work. This can be done by setting up a DMZ or by using port triggering. Please see the User Manual on our website at www.zoomtel.com/5363manual for guidance about the best setup.
In the unlikely event that you want to configure advanced options, please refer to the User Manual on our website at www.zoomtel.com/5363manual.

Hardware Connection

LAN 1-4 (Gigabit Ethernet 1-4)
Four 10/100/1000 auto-sensing Ethernet ports for computers and other devices that have an Ethernet port.
RESET
Press and hold this recessed button at least 8 seconds in the unlikely event that you want to restore the default factory settings. This button is recessed to prevent accidental resets of your cable modem/router.
COAX
Connect your coaxial cable line to this port.
POWER
Connect the supplied power cube to this port.

Connecting Model 5363 wirelessly to some device

A Wi-Fi compatible computer, smartphone, tablet, smart TV, game station, or other device can access the Internet wirelessly through your Cable Modem/Router. You can connect up to 253 devices wirelessly. To make the wireless connection, follow these steps:

  1. First, locate the wireless connection setup on your device, and then select the cable modem/router network with the same name as the SSID name on the bottom of your cable modem/router.
  2. Next, you will be prompted to enter the Security Key or Password for your wireless network. The WPA/WPA2 security key is printed on the bottom label of your cable modem/router and is unique to you.

3  When your Model 5363’s Online light is solid green as discussed above, open your device’s browser and go to a website to test your wireless setup. If it works, congratulations! If it doesn’t, please see the Troubleshooting Tips in the User Manual.

Note: In the unlikely event that you want to change the unique SSID or the Security Key, please refer to the User Manual on our website at www.zoomtel.com/5363manual

Read this only if you are connecting additional computers and/or other devices to the cable modem/router’s Ethernet/LAN ports

You can plug up to four computers, game consoles, or other Ethernet-capable devices into the cable modem’s LAN ports. For information about your specific
device, please refer to the documentation that came with that device. Follow the instructions on the other side of this Quick Start for each computer or other device.

  1. If you connected the cable modem to a computer using a wired connection when setting up the cable modem, unplug the computer now if you don’t want it to stay connected to the cable modem.
  2. To connect a computer or other Ethernet-capable device, plug one end of an Ethernet cable into any available Ethernet (LAN 1, 2, 3, or 4) port on the cable modem and plug the other end of the Ethernet cable into the Ethernet port of the additional device you want to connect to the cable modem. (If you are connecting a hub or a switch, this is typically called an Uplink or Expansion port.) If you are connecting a computer or game station, go to step 5 of this section.
  3. If you are connecting a network device such as a switching hub, use the instructions that came with that device. Then reboot any computer that is part of your network. For example, if you connected a switching hub, reboot any computer that will make a wired connection to that switching hub.
  4. If you are connecting a HomePlug adapter pair with one adapter plugged into the cable modem and an AC outlet, and the other adapter plugged into a computer or game station and an AC outlet, make those connections and then go to step 5.
  5. Verify that your Internet connection is working. Open a Web browser on each computer that’s using your network and try to connect to a familiar Web address.
    Note: If at any time you need to make changes to the cable modem’s configuration, open a web browser from any PC on your cable modem’s network and type http://192.168.0.1 to open the Zoom Configuration Manager. Alternately, you can connect a computer directly to the cable modem, open its browser, and then type http://192.168.0.1.

Congratulations! You have connected an additional device to the Internet. You can connect up to 4 Ethernet-capable devices to the cable modem/router, following the instructions above for each device and starting at step 2 of this section. You can also connect wireless devices as discussed above.

Logging in to the Zoom Configuration Manager
Most users don’t need to use the Zoom Configuration Manager. The Configuration Manager lets you configure the cable modem for gaming, configure advanced features, and make changes to the default wireless security options including the SSID and Wireless Password. Basic information about the Configuration Manager is summarized below. For more information about using the Configuration Manager please refer to the User Manual at www.zoomtel.com/5363manual .

Step 1: Connecting the Cable Modem/Router to a Computer

1 Check that the router is connected to a computer through an Ethernet cable or wirelessly.

Step 2: Establishing Communication

1 Open your Web browser, enter http://192.168.0.1 in the address bar, and press the Enter key to open the Cable Modem/Router configuration software.
2 In the login dialog box, type the following User Name and Password in lower case, then click OK.

User Name: admin
Password: admin

3  The Status page should appear. If the Status page doesn’t appear, please see Troubleshooting Tips.

Front Panel LEDs

Model 5363 has several lights on its front panel to help you monitor the cable modem/router’s status.

Please note the following:
Do not block the modem vents in any way.
Do not place the modem near a heating or air conditioning duct, in direct sunlight, anywhere susceptible to drastic temperature changes, or where it’s very hot or very cold.

Troubleshooting Tips

Problem: I cannot access the Internet. What should I do first?
Solution: Try the following:
Make sure that your Cable Modem/Router’s MAC address is registered with your cable provider. When your provider’s representative or setup software asks for your MAC address, you can find the CM MAC address on your modem/router’s bottom label. If you are having a problem, you may need to check with your cable service provider to make sure the service provider set up its system properly for your cable modem.

Make sure your Cable Modem/Router’s plugged into a live power outlet.
Check your Cable Modem/Router’s Ethernet and coaxial cable connections. Make sure the coaxial cable is tightly connected. If a computer is plugged into an Ethernet port, make sure that the cable is plugged in all the way on both ends.
If you are using wireless, check that your wireless connection is functioning correctly. Check the section below, “I am having trouble connecting my computer or another device wirelessly to the Cable Modem/Router.”
Power off your modem/router for at least 10 seconds and then power it back on.
Restart your computer or other devices connected to the Cable Modem/Router. This ensures that they receive the correct IP address from the router.

Problem: I cannot access the Internet. My Power light is on, my Downstream and Upstream lights are on or blinking, and my Online light is on.

Solution: If you are using your computer’s Ethernet port, check that there is a good connection between your computer and the modem/router’s Ethernet port. Check that the light for that port is on or flashing.

If you are using wireless, check that your wireless connection is functioning correctly. Check the section below, “I am having trouble connecting my computer or other devices wirelessly to the Cable Modem/Router.”

Problem: I cannot access the Internet. My Power light is on, and my Downstream and Upstream lights are on or blinking. My Online light won’t stay on.
Solution: Try the following:
Check to see that your cable TV is working. If it isn’t, contact your cable service provider. There may be a bad connection to the cable to your home or location.
Check with your cable service provider to make sure that your cable data service is available and running.
In some cases, the cable signal may be weak or noisy. If possible, see if the cable modem/router works better when it’s connected as near as possible to where the coaxial cable comes into your home.
If you have a splitter between the cable modem/router and the wall, remove the splitter and connect the cable modem/router directly to the wall. A splitter is a small device that has a single coax cable on one side and 2 coax cables on the other side. If this fixes the problem, you may need to get a better splitter.
  If the problem persists, you may need to ask your cable service provider to check the signal quality of your cable connection.

Problem: I am having trouble connecting my computer or other device wirelessly to the Cable Modem/Router.
Solution: Try the following:
Verify that you can access the Internet with a computer or other device connected through an Ethernet cable to one of the LAN ports of your cable modem/router.
If you cannot, try the steps outlined in the previous troubleshooting tips.
If the wired computer can access the Internet, reboot the wireless device (this will allow the device to release and renew their IP addresses) and try to access the Internet again.
If you still cannot connect to the Internet wirelessly, continue below.
Check the wireless security settings on the wireless device and verify that your device is using the same wireless security and password as the Cable Modem/Router. The default wireless settings can be found on the bottom label of your router. The settings on
your computer, phone, or other devices must match the modem/router settings – either the default settings or some new settings you
made.
Check the signal strength of your wireless connection. Most wireless adapters have some type of signal strength meter that shows
how strong your wireless signal is. Windows users, click the Wireless icon in your system tray to check signal strength. If your
signal strength is not strong enough, try reorienting the antennas on the Cable Modem/Router.
Change the wireless channel. To do that, follow these steps:

  1. Open the Zoom Configuration Manager by entering the following in your Web browser’s address bar: http://192.168.0.1
  2. In the Login dialog box, type the following User Name and Password in lower case and then click Login.
    User Name: admin
    Password: admin
  3. Click Wireless on the menu bar to open the Wireless page.
  4. On the Radio page, from the Control Channel drop-down menu, select a channel that is 5 channels away from the current channel you are using. You may need to switch the Sideband for Control Channel setting from lower to upper to access the higher channels.
  5. Be sure to click Apply after you change the channel. All devices connecting wirelessly will automatically switch to the new channel.

If changing the wireless channel did not help, you should reduce the amount of bandwidth your wireless connection is using from 40 Mhz to 20 Mhz on the same wireless page.
Move the device trying to access the Cable Modem/Router to a different location, ideally closer to the Cable Modem/Router.
If possible, move the Cable Modem/Router to a new location, ideally closer to the wireless device.
For some computers and some tablets, try deleting the old network settings including the SSID and password/pre-shared key. After you do that, use the new settings. Normally the new settings should be the modem/router’s default settings as discussed above.
Refer to your computer’s or other device’s documentation if necessary.

Problem: I don’t know my Cable Modem/Router’s SSID or Password.
Solution: The default values are printed on the bottom label of the modem/router.

If you have changed these values, connect a computer to any Ethernet port of the modem, open the computer’s Web browser, enter http://192.168.0.1 into the browser’s address bar, and press ENTER to go to that address. When the modem/router’s user interface comes up, enter admin for both the username and password. Go to the Wireless section to find the SSID and password (also called Preshared Key or Passphrase).

Problem: What do I do if my cable service provider wants me to access the Configuration Manager?
Solution: Make sure you have a connection between your computer or other device and the cable modem/router.

  1. Open the Zoom Configuration Manager by entering the following in your Web browser’s address bar: http://192.168.0.1
  2. In the Login dialog box, type the following User Name and Password in lower case, and then click Login.
    User Name: admin
    Password: admin
  3. Click the Router tab and select Cable Modem submenu tab on the left panel. Now you will see status information about your cable modem/router and its connection that you can read back to your service provider.

Problem: What if I’m told that my Model 5363 cable modem/router isn’t approved for my cable  modem service?
Solution: This product has been certified by CableLabs®, the cable service provider’s primary test lab. However, some cable service providers have their own certification process. To see whether model 5363 is certified by your cable service provider, you should be able to check your service provider’s Web site or to speak with someone from your service provider. In the unlikely event that you are told that your Zoom modem is not approved by your cable modem service, please email us at [email protected] or call us at (617)753-0963.

For additional Troubleshooting Tips see the User Manual at www.zoomtel.com/5363manual

If You Need Help

We encourage you to register your product and to notice the many support options available from Zoom. Please go to www.zoomtel.com/techsupport From here you can register your modem and/or contact our technical support experts and/or use our intelligent database SmartFactstm and/or get warranty information.

US: (617) 753-0963

Return of Defective Units

Please contact your local distributor or retailer for factory-authorized repair or replacement of your in-warranty defective product. If you are unable to reach your distributor or retailer, you can contact Zoom Factory Customer Service in the United States by calling: (617) 753-0023

Please note that you are responsible for any charges (including brokerage or customs and duties) associated with shipping the defective unit to Zoom for repair. During the first year Zoom will pay return ground shipping to the customer in the U.S. and U.K. After the first year you may be required to pay a shipping and handling fee. Any applicable customs, duties and brokerage charges to import the product are your responsibility.

Limited Warranty

Zoom Telephonics, Inc. (hereinafter “Zoom”) warrants this product against defects in material and workmanship for a warranty period of 2 years. This warranty applies to the original end-user purchaser.

For all Zoom products other than software, Zoom will, solely at its option, repair or replace this product with a functionally equivalent new or factory-reconditioned product during the warranty period. The consumer will deliver the product to Zoom. All transportation risks and costs in connection with this warranty service are the responsibility of the consumer. After the first year of ownership a small shipping and handling fee may be charged on units returned to Zoom.

Zoom will replace software at no charge if there is a defect in materials or workmanship for a period of 30 days from date of original retail purchase, provided the defective software is returned to Zoom. Shipments from Zoom will normally be via U.S. Mail. Software products supplied by Zoom are sold “as is,” without warranty, either expressed or implied, as to function, application, merchantability, performance, and quality.

Zoom is not responsible for incidental or consequential damages and is not responsible for damages resulting from the breach of any expressed or implied warranty. Zoom is not responsible for any costs of recovering, reprogramming, or reproducing any programs or data stored or used with the Zoom products, damage to property, and to the extent permitted by law, damages for personal injury.

This warranty is in lieu of all other warranties, expressed or implied. We do not assume or authorize assumptions for us of any other warranty expressed or implied. Some states and countries do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusions may not apply to you.

This warranty does not apply if the Zoom product has been damaged by accident, abuse, lightning, or other natural disasters, misuse or misapplication, or if it has been modified without the written permission of Zoom, or if any serial number has been removed or defaced.

This warranty shall not be applicable to the extent that any provisions of this warranty are prohibited by any federal, state, or municipal law that cannot be preempted. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state or country to country.

Safety Issues & Warnings

For your protection, observe the following safety precautions when setting up and using your equipment. Failure to observe these precautions can result in serious
personal injury and damage to your equipment.

WARNING: Risk of electric shock. Do NOT expose to water or moisture.
The cable modem is a high-performance communications device designed for home and office environments.
Do NOT use the cable modem outdoors. Keep the cable modem in an environment that is between 0°C and 40°C (between 32°F and 104°F).
To avoid overheating the cable modem, do NOT place any object on top of the cable modem.
Do NOT place any object on top of the cable modem or force it into a confined space.
Do NOT restrict the flow of air around the cable modem.
The manufacturer assumes no liabilities for damage caused by any improper use of the cable modem.
Never push objects of any kind through openings in the casing. Dangerous voltages may be present> Conductive foreign objects could produce a short circuit that could cause fire, electrical shock, or damage to the equipment.
Make sure the voltages and frequency of the power outlet match the electrical rating labels on the power cube.
Whenever there is a danger of lightning, disconnect the power cable and Coax cable from the cable modem to prevent damage to the unit. The use of an AC protection device will not completely protect the cable modem from damage caused by the transmission across the Coax network.

FCC Statement
This device complies with Class B Part 15 of the FCC Rules. The device generates, uses, and can radiate radio frequency energy and, if not installed and used as
instructed, may cause harmful interference to radio communication. Only Coaxial cables are to be used with this device in order to ensure compliance with FCC
emissions limits. Accessories connected to this device by the user must comply with FCC Class B limits. The manufacturer is not responsible for any interference
which results from the use of improper cables, or which results from unauthorized changes or modifications to the device. A Minimum of 26 AWG Line Cord should be used for connection to the cable modem.



More Manuals From Zoom