Loading manuals...

audio-technica Headphone Stand AT-HPS700Manual

audio-technica Headphone Stand AT-HPS700Manual Image

audio-technica Headphone Stand

Thank you for purchasing this product. Before using the product, read through the user manual to ensure that you will use the product correctly. Please keep this manual for future reference.

Safety precautions

Although this product was designed to be used safely, failing to use it correctly may result in an accident. To ensure safety, observe all warnings and cautions while using the product.

  • Do not put the product in places that are unstable or that vibrate to prevent damage from the product being knocked over.
  • Keep the product out of the reach of small children to prevent injury from the product being dropped.

Notes on use

  • The product is made to hold headphones only. It is not meant to be used with other items.
  • Do not subject the product to strong impacts to prevent damage.
  • Do not put the product in a location where it is exposed to direct sunlight, near heating devices, or in places with high temperatures, high humidity, or high concentrations of dust to prevent damage. Do not allow the product to get wet.
  • Make sure to open the headphones with both hands when taking them on/off the headphone stand.
  • If a cable is attached to the headphones, make sure when removing headphones that the cable does not catch on the stand and knock it over.
  • Do not put the product on items that generate heat, such as an audio device.
  • If the product is placed on sensitive materials, the rubber feet mark may remain.


  • Material: Aluminum (Body), Urethane (Rubber feet), Synthetic leather (Cable wrap)
  • Dimensions: 200 mm (7.9″) × 240 mm (9.4″) × 120 mm (4.7″) (W×H×D) (without rubber feet)
  • Weight: Approx. 620 g (21.9 oz)
  • Maximum load: 1 kg (2.2 lbs)
  • Accessory: Cable wrap

More Manuals From Audio-Technica