Loading manuals...

Bissell 1720-1725 Series Little Green manual


Bissell 1720-1725 Series Little Green manual Image
Bissell 1720-1725 Series Little
Green User Guide

Thanks for buying a BISSELL Little Green Portable Deep Cleaner

We’re glad you purchased a BISSELL Little Green® Portable Deep Cleaner. Everything we know about floor care went into the design and construction of this handy, high-tech home cleaning system.

Your Little Green is well made, and we back it with a full one-year warranty. We also stand behind it with a knowledgeable,
dedicated Consumer Services department, so, should you ever have a problem, you’ll receive fast, considerate assistance.

My great-grandfather invented the floor sweeper in 1876.Today, BISSELL is a global leader in the design, manufacture, and service of high quality homecare products like your Little Green.

Thanks again, from all of us at BISSELL

Mark J. Bissell
President and Chief Executive Officer

IMPORTANT SAFETY INSTRUCTIONS

How to use this guide

This User’s Guide has been designed to help you get the utmost satisfaction from your BISSELL Little Green Portable Deep Cleaner. You’ll find assembly and operating instructions, safety precautions, as well as maintenance and troubleshooting instructions. Please read this Guide thoroughly before assembling your cleaner. Pay particular attention to the product diagram, assembly instructions, and part names. Locate and organize all parts before assembly. Familiarize yourself with the parts and where they go. Following this User’s Guide will greatly enhance your ability to get the most performance from your BISSELL Little Green for many years.

WARNING!

WARNING:
Do Not plug in your deep cleaner until you have completely assembled it per the following instructions and are familiar with all instructions and operating procedures.

Product Features

Refer to Assembly Diagram on page 4

Solution Tank
The Solution Tank is the translucent tank at your right as you face the Little Green. Remove the Tank by grasping the indented handle and pulling it toward you, then tilting out.

To Fill the Solution Tank
Open the Solution Tank by pulling up on the round cap. Add BISSELL Little Green Formula to the FORMULA fill line (8-oz.) on Solution Tank.

NOTE: Your Little Green is shipped with an 8 oz. starter bottle of formula.

Fill the Solution Tank with hot (NOT boiling) tap water to the WATER fill line.

Replace the cap before placing the Solution Tank back into the unit.

Replace the Solution Tank by pacing it bottom first into the cavity, then tilting it, pressing gently at top until it snaps closed.

Collection Tank
The Collection Tank is the translucent tank at your left as you face the Little Green. It is removed and replaced on the unit just like the Solution Tank. Empty the Collection Tank after each use, when dirty water reaches the indicated maximum fill line, or as instructed in this User’s Guide.

WARNING!

WARNING:
Use only BISSELL Little Green formula in your cleaner. Use of cleaning formulas which contain lemon or pine oil may damage this appliance and void warranty. Chemical spot cleaners or solvent-based soil removers should not be used. These products may react with the plastic materials used in your cleaner, causing cracking or pitting.

Vacuum Flex Hose with Grip/Trigger Unit
Store in the on-board hose storage on the back of the Little Green. Cleaning tools attach to the Grip/Trigger unit.

Power Cord
The cord, with a three-prong grounded plug, stores in the On Board Cord Storage at the bottom of the Little Green.

Note: Unwrap Power Cord completely before operating unit.

Built-in-heater
Not included with all models
With the Little Green ProHeat, you have the ability to turn on, or leave off, the built-in heater, based on your cleaning needs.

The Little Green ProHeats’ built-in heater will raise the water temperature for improved cleaning performance. To use Little Greens’ built-in heater, first turn the Power Switch ON and then turn the Heater Switch ON. Within 30 seconds, the Heat Indicator Light will illuminate, indicating the heater has reached the correct temperature.

Begin using by depressing the Spray Trigger. Wait 5-10 seconds for non-heated water and solution mixture to travel through the Flex Hose. After 5-10 seconds, the heated water and solution mixture is ready to be applied to carpet or upholstery.

Specialized Cleaning Tools

Depending on which model you purchased, your Little Green may be equipped with one or more of these tools:

  1. 4” wide Cleaning Tool (included with all models)-For cleaning carpet, upholstery and spot cleaning
  2. Spraying Crevice Tool-For cleaning in tight areas
  3. 6” wide Cleaning Tool-For larger areas
  4. TurboBrush Cleaning Tool-Rotating brush for extra cleaning action for small areas, upholstery and stairs

To order optional tools not originally included with your Little Green see “Part Numbers and Descriptions,” page 9

How To Deep Clean Carpet or Upholstery

Getting Ready

  1. Remove Vacuum Flex Hose completely from On Board Hose Storage.
  2. Attach 4” Tool, TurboBrush* or Crevice Tool* to Grip Trigger Unit by pressing Tool onto Grip/Trigger Unit firmly, until button snaps into hole. Make certain Tool is securely attached.
  3. Unwrap Power Cord completely from On Board Cord Storage and plug into 1230 Volt,60 Hz grounded outlet as described in Important Safety Instructions, page 3.
  4. Turn Power switch to ON Position.
    Note: If your Little Green has a built-in heater, refer to instructions on page 7.
  5. Press and hold Spray Trigger on Grip/Trigger unit. Spray will start in a few seconds.
  6. Raise the Tool slightly to check for spray. If spray does not start, press firmly on the front of the Solution Tank while depressing Spray Trigger.
    *Optional on some Little Green models. To order optional parts not originally included in your Little Green model, call BISSELL Consumer Services at the telephone number listed on page 9.

WARNING!WARNING:
Be sure to unplug the cord before attaching the Turbobrush.

Pre-treating

  1. Pre-treat stained or highly soiled areas: Hold the flex hose with tool attached above carpet or upholstery, and pull trigger to spray cleaning solution.
  2. Wait 3-5 minutes before cleaning.

Deep Cleaning

  1. Place the tool directly on soiled surface at arms length. Apply downward pressure on the tool and pull toward you, while pulling trigger to spray cleaning solution.
    Note: If using the TurboBrush, the switch should be in the “BRUSH” position. This activates the brush only.
  2. Repeat, keeping the tool firmly against the surface. Continue until no more dirt can be removed. Do not overwet.
    Note: If using the Turbobrush, move the switch to the “SUCTION” position. This activates the suction to remove the dirt and cleaning solution. Move the switch back to the “BRUSH” position for additional brushing action.
    Do not overwet.
  3. Release spray trigger. Vacuum area until no more cleaning solution can be removed.
    Note: If using the Turbobrush, move the switch to the “SUCTION” position. This activates the suction to remove the dirt and cleaning solution.
  4. If the tool stops spraying, turn OFF Power Switch and check cleaning solution level. Refill if needed. Never run dry.

Deep Cleaning Upholstery

  1. Check the manufacturer’s tag before cleaning. “W” or “WS” on the tag means you can use your Little Green. If tag is coded with an “S” (with diagonal strike-through),or says “Dry Clean Only,” do not proceed.
  2. If manufacturer’s tag is missing or not coded, check with your furniture dealer.
  3. If possible, check upholstery stuffing. Colored stuffing may bleed through fabric when wet.

Tip:
Deep cleaning stairs and high traffic areas on a regular basis can prolong carpet life.

Tip:
Check upholstery stuffing before cleaning. Colored stuffing may bleed through fabric when wet.

When You’re Done

Tip:
Before turning off Little Green, vacuum up clean water to thoroughly rinse the Vacuum Hose. Then, lift the tool and point upwards. This allows any water still in the Hose to flow into the Collection Tank.

  1. Turn Power Switch to OFF position.
  2. Unplug Power Cord from outlet.
  3. Remove and rinse Solution Tank, then replace.
    Note: If a significant amount of Little Green formula/water remains, you many leave it in the Solution Tank for your next cleaning task.
  4. Remove Collection Tank, fill with clean water, rinse thoroughly and discard, then replace.
  5. Disconnect the tool from Grip/Trigger unit by pushing down on button lock and pulling straight off (Do NOT twist tools to remove them).
  6. Once removed from the Vacuum/Flex Hose, the tools can be cleaned:
    4”,6”,or Crevice tool-Rinse under clean running
    water. TurboBrush tool-Switch must be in “SUCTION” position. Rinse under clean running water.
  7. Check Spray Nozzle for accumulated dirt or debris. If necessary, clean with soft bristle brush.

WARNING!

WARNING:
Keep face away from spray. Failure to do so may result in personal injury.

Storage

  1. Wipe all surfaces with a soft cloth.
  2. Wrap Power Cord around Onboard Cord Storage at the bottom of Little Green.
  3. Wrap Vacuum Flex Hose around Onboard Hose Storage and secure Grip/Trigger.
  4. Store Cleaner in protected, dry area, at room temperature (40º to 110ºF).

Note: For Little Green TurboBrush Models, on-board storage for the TurboBrush Tool has been provided on the back of the unit. Attach the TurboBrush to the unit by pressing onto holder firmly until button snaps into hole.

Troubleshooting

WARNING!

WARNING:
To reduce the risk of injury from moving parts and/or electrical shock, turn Power Switch OFF and disconnect polarized plug from electrical outlet before performing troubleshooting checks.

BISSELL Consumer Services

For information about repairs or replacement parts, or questions about your warranty, call:

BISSELL Consumer Services 1-800-237-7691
Monday – Friday 8 a.m.— 7 p.m.EST
Saturday 9 a.m.— 2 p.m.EST

Or write:
BISSELL HOMECARE,INC
PO Box 3606
Grand Rapids MI 49501
ATTN: Consumer Services

Or visit the BISSELL website – www.bissell.com
When contacting BISSELL, have model number of unit available.
Please record your Model Number:___________________
Please record your Purchase Date: ___________________

NOTE: Please keep your original sales receipt. It provides proof of date of purchase in the event of a warranty claim. See “About Your Warranty” on page 14 for details.

Replacement parts – BISSELL Little Green

©2001 BISSELL HOMECARE, Inc.
Grand Rapids, Michigan
All rights reserved. Printed in USA.
Part Number 010-5762
Rev 5/01
Visit our website at:
www.bissell.com

About Your Warranty

This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Services by E-mail, telephone, or regular mail as described below.

Limited One Year Warranty
Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the product BISSELL Homecare Inc. will repair or replace (with new or remanufactured components or products),at BISSELL’s option, free of charge from the date of purchase by the original purchaser, for one year any defective or malfunctioning part.

See information below on “If your BISSELL product should require service”.

This warranty applies to product used for personal, and not commercial or rental service. This warranty does not apply to fans or routine maintenance components such as filters, belts, or brushes. Damage or malfunction caused by negligence, abuse, or use not in accordance with the User’s Guide is not covered.

If your BISSELL product should require service:
Call BISSELL Consumer Services at the number below or visit the BISSELL website – www.bissell.com to locate a BISSELL Authorized Service Center in your area. If there are no authorized BISSELL Service Centers in your area, select the “Customer Service” tab, and follow the instructions for contacting us via email. A BISSELL Representative will issue you a Return Authorization Number and a pre-paid mailing label to return the unit to BISSELL for warranty repair.
The machine should be returned with a photocopy of your proof of purchase.(Your dated sales receipt is your proof of date of purchase in the event of a warranty claim – do not send original.)

If you need information about repairs or replacement parts, or if you have questions about your warranty, select the “Customer Service” tab on our website and follow the instructions for contacting us by e-mail.

Or call:
BISSELL Consumer Services
1-800-237-7691
Monday – Friday 8 a.m.- 7 p.m. EST
Saturday 9 a.m.- 2 p.m. EST

Or write:
BISSELL HOMECARE,INC.
PO Box 3606
Grand Rapids MI 49501
ATTN: Consumer Services

BISSELL HOMECARE,INC.IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE ASSOCIATED WITH THE USE OF THIS PRODUCT.BISSELL’S LIABILITY WILL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT.

Some states do not allow the exclusion or limitation of incidental or consequential damages,so the above limitation or exclusion may not apply to you.

*EXCEPTIONS AND EXCLUSIONS FROM THE TERMS OF THE LIMITEDWARRANTY

THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES EITHER ORAL OR WRITTEN. ANY IMPLIED WARRANTIES WHICH MAY ARISE BY OPERATION OF LAW,INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,ARE LIMITED TO THE ONE YEAR DURATION FROM THE DATE OF PURCHASE AS DESCRIBED ABOVE.

Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.




More Manuals From Bissell