Sections in this Manual
Above Floor Cleaning
- Raise handle to upright position.
- Grasp hose and pull up to remove from hose holder.
- For extended reach, remove the extension wand by pressing the extension wand release lever and pulling the handle out of the body.
- Connect the hose to the extension wand by inserting into the open end of the extension wand and twisting to lock.
- Attach desired tool by firmly pushing onto end of vacuum hose or extension wand.
ATTENTION: The floor brush will continue to rotate while using your vacuum for above floor cleaning. To prevent carpet damage, do not lean on the vacuum or let the power foot tilt forward.
Power Cord Storage
WARNING: To reduce the risk of electric shock, turn power switch OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks.
When you have finished using your vacuum, store the power cord on the cord wraps. Loop power cord around cord wraps on back of cleaner, making certain the Upper Quick Release cord wrap is pointed up towards the handle and the Lower Quick Release cord wrap is pointed down towards the floor. Clip molded plug to power cord to secure.
