DENVER Smartwatch

Overview

Smart Watch

1. Touch screen
2. Shortcut key for sport mode
3. Power button
4. Speaker
5. Charging terminals
6. Heart rate sensor
7. MIC

Charging

• If you use a power adaptor (Not included), current of the power adaptor should be: 5V, 500mA.
• It takes 2-hours to fully charge the smart watch, please follow steps below to charge.

1. Make sure the POGO-pins on the charging cable fit correctly onto the charging terminals on the back of smart watch.
2. Plug the big end of the USB cable to a power source.

How to use

Turn on: Hold press power button in 3 seconds Go to main menu: Swipe from right to left on watch face interface.
Switch main menu: Swipe up/ down
Confirm: Tap the icon
Exit: Swipe from left to right
Return to watch face interface: Short press power button on any interfaces
Sport mode shortcuts: Short press the shortcut key for sport mode
Check notifications: Swipe from left to right on watch face interface
Switch submenu/ shortcuts: Swipe up/ down.
Turn off: Hold press power button in 3 seconds.When turning on smart watch, you will see the watch face. From the watch face interface, swipe left to get into main menu, right to get connection reminder or notification shortcut page, up to get sports data and down to get basic settings.

Install “Denver Smart Life” app on the phone

Search and install the “Denver Smart Life” app from Google Play or App Store. Or scan the following QR code to directly install the app.

Connect smart watch with phone

Mobile phone requirement: Android 4.4 or above, iOS7.0 or above.
Step 1: Paring SW-660 to the app
Enable Bluetooth on your smart phone and your smart watch. Open DENVER Smart Life app on your smart phone, set up your profile on Settings. Tap “Denver SW-660” picture on Settings, select the name of your smart watch (or your smart watch name. LE on iPhone) and select your device in the list for connection.
Step 2: Pairing for calling function Go to Phone “Settings” ®”Bluetooth” and select your smart watch name in the list of devices for connection.

Unbind smart watch with mobile phone

1. Open “Denver Smart Life” on your smart phone.
2. Tap “Disconnect smart watch” on Settings.
3. Forget your device on your smart phone Bluetooth settings.

Watch face
Long press current watch face, you can swipe left and right to choose the watch face you prefer.Shortcuts(swipe from up to down on watch face)Gesture reminder
Gesture reminder, you can click the icon to turn on and off.

Power saving mode
In power saving mode, all functions will be off and only the current time will be displayed.

Do not disturb mode
Do not disturb mode, you can click the icon to turn on and off.

Sound
You can switch the sound mode by clicking the icon.

Sport mode

Short press the shortcut key for sport mode to get in, or swipe left on the watch face to enter in sport mode. There are 5 sport modes- outdoor run, walking, climbing, cycling, and indoor running. Slide up/ down to select the sport mode you want to start.GPS

• When using GPS function, make sure to manually activate it before usage.
• Go outdoors or an open area.
• The front of the device should be oriented toward the sky.
• Please wait a few seconds while the device locates satellites.

Sports tracking
Current GPS status, mileage, and time spent of your sport etc. will be displayed. Swipe from left to right, record of your sport data will be paused. Click “Resume” to return and display real-time data of your sport. Click “End” to end your sport, your sport data will be saved automatically, and the sport data page will pop up. Please note, if your sport time is very short, sport data cannot be saved.

History

You can view your sport history with detailed sport data, such as mileage, cost time, averange pace, calories etc. And you can slide to the bottom and click delete to delete this sport history.

Sport Setting

Target setting: you can set mileage, consume, time or just free mode for your sport. Alert settings: you can turn on or off some alerts here. Personal data: you can set your personal information here.

Pedometer

The watch has built-in pedometer, and will track your steps during the day. In the app you can set up your daily goal. You can also turn on sedentary alarm and it will remind you to do some sports.

Heart rate

You can swipe 3 times from down to up on watch face to test heart rate. Make sure your smart watch fits snugly against your wrist when measuring your heart rate.

Sleep monitor

The watch also registers your sleep and will give you an overview over your sleep in the app (show you how many hours of deep sleep and light sleep you had). You can swipe 4 times from down to up on watch face to check sleep data.

Calls

You can both make a call and take a call on the watch itself. There are built-in speaker and microphone. (Please note that you need to hold the phone within Bluetooth range). To make a call, please swipe twice from up to down on watch face, and you will find the dial keys.

Notifications

Make sure both notification access on your phone and notification in app settings are on. To check notifications, swipe from left to right on watch face, and click the message you need to read.

Weather

Once the watch is successfully connected to the app, you can set the weather in the app and the weather can be checked on your watch.

Stopwatch

You can use the stopwatch to calculate the time. Tap to start the stopwatch, tap to pause ,tap to reset the stopwatch

Alarm

You can set new alarms here.Call log

After successfully connected with your phone, you will see call history of your phone here.

Phonebook

After syncing with phone, you can check phone book here.

Camera

To enjoy this feature, make sure the camera of your smart phone is on. Enabling Remote capture function will let you take pictures remotely from your smart watch.

More other functions

Swipe up/down or left/right to enjoy more smart functions. We hope you like your new smart watch. If you want more information there is a full manual in English on our website.

Please notice – All products are subject to change without any notice. We take reservations for errors and omissions in the manual.Electric and electronic equipment and included batteries contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment and batteries) is not handled correctly.

Electric and electronic equipment and batteries is marked with the crossed out trash can symbol, seen below. This symbol signifies that electric and electronic equipment and batteries
should not be disposed of with other household waste, but should be disposed of separately. As the end user it is important that you submit your used batteries to the appropriate and designated facility. In this manner you make sure that the batteries are recycled in accordance with legislature and will not harm the environment. All cities have established collection points, where electric and electronic equipment and batteries can either be submitted free of charge at recycling stations and other collection sites, or be collected from the households. Additional information is available at the technical department of your city.

Hereby, Inter Sales A/S declares that the radio equipment type SW-660 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
Please enter: www.denver-electronics.com and then click the search ICON on topline of website. Write modelnumber: SW-660 Now enter product page, and red directive is found under downloads/other downloads.

Operating Frequency Range: 256MHZ
Max Output Power: 0.56W
Warning Lithium battery inside

DENVER ELECTRONICS A/S
Omega 5A, Soeften DK-8382 Hinnerup Denmark
www.facebook.com/denverelectronics

Before operating this vehicle, read all the instructions for safe assembly and operations. User’s manual can guide you through the functions and usage of kart. Before using this kart, familiarize yourself with how to operate, so that you can keep the kart in the best condition possible.

1

2

3

Safety Instructions

As with all means of transport, there is a safety risk. Therefore, you have to understand the safety precautions about the product very well and be careful when driving:

1. Do not accelerate and/or brake very quickly; or go from one to the other constantly.
2. If there is a risk of falling, please react to personal safety first.

Caution

1. Please wear safety helmet, gloves, knee pads，and other necessities to protect yourself when driving.
2. Please go to a quiet open area to practice.
3. Should not be driven on uneven surfaces, such as soil road, rock road.
4. Should not be on inclines/declines over 30 degrees
5. Not recommend for children under 12 years.
6. Only for use on closed/private areas.

Daily maintenance

• Wipe the shell of kart with soft cloth.
• Store the kart indoors. Put it in a place with a dry and suitable environment.
• Do not store the product in sunlight or near open fire.

To operate:

Use a strap to attach the cart to the scooter

1

2

3

4

5

6

Sit on seat, feet on foot rest. Turn on the power switch.

• Do not push the handles up or down whilst your feet are on the ground.
• Keep feet away from the wheel. Feet should never go over the edge of the rubber foot grip.

Move forward: Push the handles down on both sides at the same time.

Move back or brake

Turn left: Push the right handle down.

Turn right: Push left handle down.

• Turn the board off before getting off the seat.

Scooters have differing settings. You may need to get off the kart and loosen the straps and lift the kart slightly off the board before you are able to turn it off.

Be very careful when getting of the kart when the board is still on. Moving the handles will make the kart move.

Imported by:
DENVER ELECTRONICS A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark

facebook.com/denverelectronics

www.denver-electronics.com

1. Included in the package is:

1 x control panel, 1 x keypad, 1 x PIR motion sensor, 1 x door/window sensor, 1 x remote controls, 1 x passive RFID tag, 1 x IP camera, 1 x burglar preventive warning sign, 3 x burglar preventive warning stickers
All the accessories are paired with the control panel, except the IP camera.

2. Design

3. Get started

Download the app called “DENVER SMART HOME” on your smart phone. It is available on App store and Google play.

The app will ask you to register a user. Please do this by using your mobile number or email address, and then log into the app. You will be asked to create a “family”. This is to make it easy to have several systems in the app at the same time.

Now you need to add the alarm system to the app.
First, unpack control panel and all accessories, make sure to pull out any battery savers and turn on the control panel by pushing the power switch (use a pen or a toothpick or similar small product to push the power switch)

Push “Add Device”, go to “Others” and choose “Wi-Fi connector!, and follow on screen instructions. It will guide you through the whole setup.

Now the alarm system is connected and you can put your sensors etc. where you want them.

You need to connect the IP camera separately. To do that, repeat the “add new” instructions and choose “security & sensor” and then choose “smart camera” and follow on screen instructions.

4. Daily use

In your home screen of the app you can now find your alarm. Push this and you will get to alarm setting page. Here you can arm, disarm, put in home mode etc. This is also where you add sensors and accessories if you get more of them. You can also adjust delay time, automated arm/disarm times etc.

You can also use the remote control to arm/disarm alarm system. And also the keypad that are included.
When using the keypad, push the code (standard 1234, which can of course be changed) and then the lock to arm it, do the same thing and the open lock to disarm)
The RFID tag can be used to disarm the alarm system. This is done by holding it up against the keypad. (you can only disarm this way, not arm)
The smartest & easiest way to use DENVER SHA-150 is with this smartphone app, and the alarm system on Wi-Fi, but It is possible to use the alarm system with SMS commands or phone call as well. Instructions to do this can be found in the full manual, available on our website. Please enter www.denver-electronics.com and use the search function to find SHA-150. Here you can find the full manual in English.
If you by any means need to reset the control panel this is done by pushing the connection button 5 times within 5 seconds, after turning on the control panel. This will set it back to factory default. (Please notice that all pairing with sensors and accessories are also deleted then. Please check the full manual to see how to add sensors again.

Please notice – All products are subject to change without any notice. We take reservations for errors and omissions in the manual.

ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S

Electric and electronic equipment and included batteries contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment and batteries) is not handled correctly.

Electric and electronic equipment and batteries is marked with the crossed out trash can symbol, seen above. This symbol signifies that electric and electronic equipment and batteries should not be disposed of with other household waste, but should be disposed of separately.

As the end user it is important that you submit your used batteries to the appropriate and designated facility. In this manner you make sure that the batteries are recycled in accordance with legislature and will not harm the environment.

All cities have established collection points, where electric and electronic equipment and batteries can either be submitted free of charge at recycling stations and other collection sites, or be collected from the households. Additional information is available at the technical department of your city.

Hereby, Inter Sales A/S declares that the radio equipment type SHA-150 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.denver-electronics.com and then click the search ICON on topline of website. Write model number: SHA-150. Now enter product page, and red directive is found under downloads/other downloads.
Operating Frequency Range: Max Output Power:

DENVER ELECTRONICS A/S
Omega 5A, Soften
DK-8382 Hinnerup
Denmark www.facebook.com/denverelectronics

DENVER Party Speaker

Specification:

• 10″ +10″ woofer,
• 2″ tweeter,
• Power: 72 W RMS
• USB/Micro SD Card input
• Aux in
• Bluetooth Connect, Recording
• EQ (Pop Rock Jazz Classical Flat)
• TWS function: Wireless connection, up to 2pcs speakers playing together to double the sound.
• Built in 4,500mA rechargeable battery
• Play time: 1.5 hours at 100% volume
• Charging time: 5 6 hours
• MIC input, Guitar Input Microphon e priority
• Different modes Disco light (controlled by top panel and remote control)
• BASS/Treble/Microphone Volume control/Microphone Echo
• Product size: 33 x 28 x 84 cm
• Product weight: 11.15 kg

What you have in pack:

• User manual
• Remote control
• Power cable

Top panel operation

1. Power switch(AC play Power off DC play)
2. USB play back
3. Micro SD card play back
4. Aux in (3.5 mm PIN line cable)
5. MIC input,
6. Guitar input
7. Short press for the previous song, long press for fast backward
8. Play/pause under USB/Micro SD/BT. Long press this button to enjoy TWS function.
   TWS connection spec:
   When you are playing a speaker (host) under USB/Micro SD/AUX/BT mode, at this time you want another speaker to share this song. You can turn on a new speaker, Long press “Play/pause” button, the LED display will show “SLAU” and keep blinking, now it is searching for the host. Once host found, this new speaker will connect automatically to the host, and “SLAU” will not blink. At this time 2pcs speakers are playing the same song. The new joining speaker can operate: play/pause previous song next song volume control.
9. Next song: short press for next song, long press for fast forward.
10. Volume control. Long press volume+/ to increase/decrease the LED light
11. MENU (control BASS/Treble/MIC Volume), long press this button to restore factory settings
12. Microphone volume control
13. Mode switch
14. Microphone Echo +
15. Microphone Echo
16. REPEAT one song, Loop Playback.
17. Press to get super bass effect
18. Microphone priority (when playing USB/Micro SD, press this button, and the microphone volume will override songs in USB/Micro SD)
19. Short press to record songs from microphone to USB/ Micro SD,;long press to play recordings, and long press again to delete recordings
20. EQ effect switch
21. Press to get various LED light effects. Short press for color changing. Press and hold this button to change light modes. Or turn off the light. Press it again to turn on LED light.

Remote control

1. Mute: Available to be mute at any mode
2. Previous Song: Under USB/Micro SD card mode previous song. Under BT connection mode previous song.
3. Mode: Press short to skip to Wireless BT/LINE IN/USB/Micro SD mode.
4. Record function: Under USB/Micro SD card mode, press “REC” button to record
5. Echo
6. BASS+/
7. EQ function
8. Microphone Volume+/
9. Stand by
10. Pause & Play
11. Next song:  Under USB/Micro SD card mode next song. Under BT connection mode next song.
12. Light mode control: Short press to change light color, press and hold this button to change light mode, or off the light, press it again to turn the light on.
13. Repeat function
14. Record play
15. Record delete
16. Echo+
17. Microphone priority If you speak via microphone when playing music, your sound will override the sound in USB/Micro SD card
18. Treble+/
19. Main Volume
20. Number buttons: Under USB/Micro SD mode to choose songs.

OPERATING INSTRUCTIONS

• Wireless BT Pairing Mode: Press MODE or the Blue button on the unit or the remote control until BT is selected.

1. Put the cell phone within 20 meters;
2. Activate the BT features on your cell phone so that the cell phone starts to search for BT device. Please refer to the user manual for details
3. Select the correct model no. (BPS 455) The device found by the cell phone;
4. Short press the PLAY/PAUSE butto n to play or pause music. Short press the or key to select the previous or next track.

LINE IN MODE:
Press the MODE button on the unit or the remote control until the LINE is selected. Play the music of the device connected to the LINE input. Short press the “ “” key to the next song

USB Mode:

1. After start up, press MODE to select USB and insert the USB device. The unit will automatically read and play the music in the USB device.
2. Press the key short to pause or play.
3. Short press the key to the previous song.
4. Short press the key to the next song.
   Please notice:
   — All products areAll products are subject to change without any notice. We take reservations for subject to change without any notice. We take reservations for errors and omissions in the manual.errors and omissions in the manual.

Electric and electronic equipment and included batteries contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment and batteries) is not handled Electric and electronic equipment and batteries is marked with the crossed out trash can symbol, seen above. This symbol signifies that electric and electronic equipment and batteries should not be disposed of with other household waste, but should be disposed of separately. As the end user it is important that you submit your used batteries to the appropriate and designated facility. In this manner you make sure that the batteries are recycled in accordance with legislature and will not harm the environment.

All cities have established collection points, where electric and electronic equipment and batteries can either be submitted free of charge at recycling stations and other collection sites, or be collected from the households. Additional information is available at the technical department of your city.
Hereby,
Inter Sales A/S declares that the radio equipment type BPS 455NR is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.denver-electronics.com and then click the se arch ICON on topline of website. Write model number: BPS 455NR Now enter product page, and RED directive is found under downloads/other downloads.
Operating Frequency Range:
2402MHz~2480MHz
Max Output Power: 72

DENVER ELECTRONICS A/S
Omega 5A, Soeften DK DK–8382 Hinnerup8382 Hinnerup
Denmark
www.facebook.com/denverelectronics
www.facebook.com/denverelectronics

DENVER Bluetooth Soundbar with Wireless Subwoofer

Product overview

Description

1. /SOURCE: Short press to power on, and then short press again for function change, long press to turn off.
2. VOL –: Short or long press for volume
3. VOL+: Short or long press for volume up.
4. Bluetooth disconnect/pair: short press or long press to disconnect BT device. Short press or long press for Bluetooth pairing mode.
5. TF/Micro SD card slot
6. USB flashdrive connection
7. DC IN
8. HDMI IN (ARC)
9. LINE IN
10. OPTICAL IN
11. AUX IN (Right)
12. AUX IN (Left)

LED function indicator

1. Red light: The soundbar unit is powered off (standby).
2. White light: The soundbar unit is powered on.

What’s in the box:

• 1* Soundbar
• 1* Subwoofer
• 2* Power Adaptor
• 1* User Manual
• 1* Remote Control
• 1* Wall Mount Bracket

Remote control

1. Short press to switch the soundbar unit on or off (standby).
2. TREBLE –: Press to decrease the treble
3. TREBLE+: Press to increase the treble effect.
4. VOL+: Short or long press to turn the volume up. Short press to switch mute off if mute function is on.
5. VOL –: Short or long press to turn the volume down. Short press to switch mute off if mute function is on.
6. Press to jump to previous song in Bluetooth/USB/TF mode.
7. Press to jump next song in Bluetooth/USB/TF
8. MUSIC: Press to select Music sound effect settings.
9. MOVIE: Press to select cinema sound effect settings.
10. DIALOG: Press to select Speech sound effect setting.
11. BASS –: Press to decrease the bass effect. Short press to switch mute off if mute function is on.
12. BASS+: Press to increase the bass effect. Short press to switch mute off if mute function is on.
13. M: Press to change Input source Long p ress to mute function on or off.

Operation
Inserting Batteries before using the Remote Control Insert AAA batteries to the Remote Control to activate it.
Note: The Remote Control works within a range of 6 meters.

Getting Started:

1. Make sure you have made all the necessary cable connections before connecting the Soundbar to a wall outlet, when connected to the wall outlet, the soundbar will enter the standby mode and the power indicator will turn red.
2. Make sure the subwoofer is connected to the power source and turn the button to “ON”
3. Short press /SOURCE on the unit or on the Remote Control to turn on the soundbar. The power indicator will turn white.
4. Press the Source button on unit or remote control to choose the desired input source.
   Note: The Soundbar will enter the standby mode if there is no active input signal for 15 minutes.

Pairing with the subwoofer
The wireless subwoofer automatically connects with the soundbar when both units are powered on. If the subwoofer is on and connected, the red LED indicator will be on continuously.
Note: For troubleshooting connection problems, refer to the trouble shooting section.

Bluetooth Pairing:

1. Short press the Source button on the Sourndbar and choose the Bluetooth input (voice “Bluetooth”).
2. The indicator light will be flashing slowly to indicate that it is searching for a Bluetooth device.
3. Long press the Pair button on the side of the unit. The power indicator will start to flash quickly.
4. Turn on the Bluetooth function on your smart device and activate Bluetooth device scanning.
5. Select “SR250G” from the list of found devices.
6. If necessary, enter the password “0000” and press “OK”.
7. When successfully paired with your device, the indicator light will be on continuously. You can use the Remote Control to control music playback of the connected Bluetooth device. (The operation range for the Bluetooth connection is10 meters).

Note: if a mobile phone you are playing music receives a call, the music will stop playing. When the call is ended, the devices are connected to each other again and playback will resume.

Removing the connected Bluetooth device
Press and hold the Bluetooth button (3 in below picture) on the soundbar for 3 seconds to disconnect the connected Bluetooth device.

AUX Source:

1. Ensure that the soundbar is connected to the TV or other audio device via an AUX cable.
2. Short press the “M” button on the Remote Control un til you hear the voice “Auxiliary”. You also can short press the source button on the soundbar to choose the AUX source.

OPTICAL IN Source:

1. Ensure that the soundbar is connected to the TV or other audio device via an Optical cable.
2. Short press the “M” button on the remote control several times until your hear the voice “optical”. You can also short press the Source button on the soundbar to choose the Optical source.

LINE IN Source:

1. Ensure that the soundbar is connected to the TV or other audio device via an audio cable (3.5 mm jack).
2. Short press the button on the Remote Control several times until you hear the voice “Line in”. You can also short press the Source button on the soundbar to choose the LINE IN source.

HDMI Source
Ensure that the soundbar is connected to the TV or other audio device via a HDMI cable. Short press the “M” button on the Remote Control several times until you hear the voice “HDMI”. You can also short press the Source button on the soundbar to choose the HDMI source.
Note: If your TV is equipped with H D MI (ARC), the soundbar can synchronize the volume with your TV.

TF CARD (Micro SD card)
Short press the button to turn on the soundbar, insert the TF card into the TF card slot. The soundbar will start to play the music. Short press to play/pause the music. Short press or on the Remote Control to play the previous/next song. You can use MicroSD cards of max 128GB formatted in FAT32 format. The soundbar can play MP3, WAV and WMA files.

USB flashdrive play

1. Short press the button to turn on the soundbar, insert a USB flahsdrive into the USB connection. The soundbar will start playing the music from the USB. Short press to play/pause the music. Short press or to play the previous/next song. You can use USB flashdrives of max 128G B formatted in FAT32 format. The soundbar can play MP3, WAV and WMA files.
   Note: The USB connection is not intended for charging or connecting other devices.

Please notice
All products are subject to change without any notice. We take reservations for errors and omissions in the manual.

Electric and electronic equipment contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment) is not handled correctly. Electric and electronic equipment is marked with the crossed out trash can symbol, seen above. This symbol signifies that electric and electronic equipment should not be disposed of with other household waste, but should be disposed of separately.
All cities have established collection points, where electric and electronic equipment can either be submitted free of charge at recycling stations and other collection sites, or be collected from the households. Additional information is available at the technical department of your city.

Hereby, Inter Sales A/S declares that the radio equipment type DSS 7020 is in compliance with Directive
2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
www.denver-electronics.com and then click the search ICON on topline of website. Write modelnumber: DSS-7020.Now enter product page, and red directive is found under downloads/other downloads
Operating Frequency Range:
2402 2480MHz

Max Output Power: 70w

DENVER ELECTRONICS A/S Omega 5A, Soeften DK n8382 Hinnerup Denmark
www.facebook.com/denverelectronics

DENVER Portable Bluetooth Speaker User Manual

PART DESCRIPTIONS

1. HANDLE
2. EQ KEY
3. TUNING UP
4.  ECHO DOWN
5. REPEAT/LIGHT
6.  ECHO UP
7.  MIC VOLUME UP
8.  MIC VOLUME DOWN
9.  BATTERY INDICATOR
10.  VOLUME UP KEY
11.  BLUETOOTH INDICATOR
12.  VOLUME DOWN KEY
13. POWER INDICATOR
14. PAUSE/PLAY/BT OFF
15. SOURCE
16. TUNING DOWN
17.  BALDRIC CLIP
18. FM ANTENNA
19.  USB PORT
20.  LINE IN
21. MIC PORT
22. DC (15V 1.0A) INPUT
23. POWER ON/OFF KEY
24. SHOULDER STR

SAFETY INSTRUCTIONS

To ensure proper operation of the product and prevent fire or shock hazard, please carefully read all information contained in these Safety Instructions.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (ORBACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.

UNPACKING

Check that all the following items should be included in the box.

• Main Unit
• AC Power Adaptor
• User Manual
• Shoulder Strap

IMPORTANT INSTRUCTIONS

1. Ensure the plug is fully inserted into the wall outlet and the product is operated  electric power source matched to its rated voltage.
2.  Never operate the product if the cord or adaptor is damaged or overly hot.
3.  Do not modify the cord or damage it in any way such as by bending, twisting or pulling on it unnecessarily.
4. Do not attempt to modify, repair or in any way dismantle the product, other than when discarding it at the end of its useful life
5.  Never unplug this product with wet hands.
6.  Unplug the product from the wall outlet before cleaning and maintenance. Do not use liquid cleaners or aerosol cleaners.
7.  The power cord should be unplugged from the wall outlet when unused for  along period of time.
8.  Store this product in dry area when not in use.
9. Do not use this product near water, heat sources or other apparatus that produce heat.
10. Battery shall not be exposed to direct sunlight or fire.
11. Do not attempt to replace the battery. For repairing and servicing,  please consult from the store of purchase or customer service centre designated by the store.
    Danger of explosion if battery is incorrectly replaced.
12.  Do not use any other power supply other than the one specially designed for this product.
13.  Keep this operating instruction in a safe place.
14. Contact an authorized service centre if you have any inquiry about this product.

POWER CONNECTION

• Unpack this product, ensure the power ON/OFF switch is on “OFF”.
•  Connect the supplied AC adaptor to this product, plug the AC adaptor to the wall outlet.
  

RECHARGING

• Unit comes with a battery indicator alert.
•  If Battery LED flashes, it means the battery level is low and recharging is  required.
•  By connecting the AC power, the Battery LED will turn red, it means the unit  is under recharging.
• When the Battery LED becomes green, it means the battery is fully charged.
  
  Note :  It is recommended to charge the battery about 6 hours before you start using the unit for the first time. Energy Saving: If this product is idle for about 20 minutes, it will go to standby mode automatically. It will auto power off.
  To keep the rechargeable battery in good condition, users should check the unit and be sure to turn the Power On/Off switch on the back panel to “Off” every time after using and before storage, it is highly recommended  that users should fully recharge the battery at least once every two months.

BLUETOOTH CONNECTION

• Once the power switch is turned to “On”, Bluetooth “BT” mode is set as default
• Blue LED indicator will be flash in pairing mode. The red LED display will show “bt”
• Turn on the Bluetooth function on your device and search for “TSP-205” then press to connect.
• Connected sound signal will be heard and the blue led connection indicator will stop blinking and stay steady.
•  Bluetooth connection is completed.
•  Select the music from your Bluetooth device and start playing.
•  Holding the BT OFF key to disconnect paired device and enter pairing mode.
  

FM RADIO

•  Press the “Source” button and select Radio, the FM Radio Frequency will show on the red LED display.
• Press play/pause key to auto search and store.
• Press and hold the TU or  TU buttons to choose the next stored available station. Short press them to fine tune.

USB PORT

• Press the “Source” button and select USB. USB will show on the red LED display.- Insert the USB stick.
• Select your favorable music by pressing TU  or TU .
•  Press “REP” to repeat once for the current song, Press again “REP” to repeat all songs. press the button three times to enter the random play mode.
  
  Note : It will automatically switch to USB mode once insert the USB stick.

Important: The USB port is intended for data transfer only. Other devices cannot be used with this USB connection. The use of USB extension cords is not recommended.

LINE IN

• Press the “Source” Button and select LINE. LINE will show on the red  LEDdisplay
•  Plug in your 3.5mm cable into the LINE Input on the back panel and the unit will enter into LINE IN mode
• You can connect any audio device that   has 3.5mm audio output jack and playback any audio from the  connected device.
  

SING-A-LONG

• This product allows you to sing-a-long with the songs that are playing either on BT, USB or LINE IN mode.
• Plug in your Microphone cable into the side panel marked “MIC”
  Adjust the MIC Volume “MIC + / MIC – ” or main volume on the top control panel.
•  Adjust the Echo level ” EH + /EH – “.
• Start to sing
  
  If the MIC Volume and ECHO level set too high or to the maximum, be caution with the high pitch reflection tone.

SOUND EFFECTS

• ” Customer’s model ” has a built in Equalizer
•  Press and select the preset sound effect for your music; FLAT, CLASSIC, POP, ROCK and JAZZ

LIGHT EFFECTS

• Long press to turn On/Off disco light.

TROUBLESHOOTING

General

No power

•  Check that AC adaptor is securely inserted in the unit and the electrical outlet.
• Check the Power On/Off switch is turn to On position.
•  If battery is flat Plug in the AC adaptor to charge and operate.

Keys no response

•  Turn the Power On/Off switch to Off, and then On again to reset the unit.
•  Unplug the AC adaptor and plug it back again.

No sound heard

•  Make sure the LINE connected volume is turn to reasonable level.
• Make sure the Bluetooth connected device output the audio via BT out.
• Make sure the Bluetooth connected device volume is turn to reasonable level.

Bluetooth Operations

Audio quality is poor

• Bluetooth reception is poor. Move the Bluetooth device nearer to the speaker.

Cannot pair to Bluetooth device

•  Make sure both Bluetooth device and speaker are not connected to any other Bluetooth device.
•  Make sure the blue LED on the speaker is flashing quickly (Pairing mode).
• Turn Power switch to Off, and then On again, Press and hold BT off   buttonf or 2 seconds to enter into pairing mode.

• The AC/DC adaptor and main unit shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus and AC/DC adaptor.
• Minimum distance of 10 cm around the apparatus for sufficient ventilation.
•  The ventilation should not be impeded by covering the ventilation  openings with items, such as newspapers, table-cloths, curtains, etc.
•  No naked flame sources, such as lighted candles, should be placed on  the apparatus.
• When the mains plug of AC/DC adaptor is used as the disconnect device, the disconnect device shall remain readily operable.To be completely disconnected  the power input, the AC/DC adaptor shall bedisconnected  from the mains completely.
•  The AC/DC adaptor should not be obstructed and should be easily accessed during intended use.
• Do not use the apparatus in tropical climates.

About Sealed Lead-Acid Battery:
This unit works either on the battery pack (Model no.: Tianchang 6-FM-2.6, 12V, 2600mAh) unplug the AC Power adapter from the DC input jack to work on the  battery pack (after fully charged); plugging the AC Power adapter while the battery pack is attached initiates the charging of this battery. The charged LED indicator lights red during charging, when the battery is fully charged the indicator is green. Fully charging an empty battery pack may take 3 hours. A fully charged battery pack can last approximately 2 hours of continuous playback. This playing time may vary with the surrounding environment, the volume level of the speaker and the  battery condition. It is advised that you wait 10-20 minutes before recharging the battery pack if it has run flat during operation.

ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S

www.denver-electronics.com

Electric and electronic equipment and included batteries contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment and batteries) is not handled correctly.

Electric and electronic equipment and batteries is marked with the crossed out trash can symbol, seen below. This symbol signifies that electric and electronic equipment and batteries should not be disposed of with other household waste, but should be disposed of separately.

As the end user it is important that you submit your used batteries to the approriate and designated facility. In this manner you make sure that the batteries are recycled in accordance with legislature and will not harm the environment.

All cities have established collection points, where electric and electronic equipment and batteries can either be submitted free of charge at recycling stations and other collection sites, or be collected from the households. Additional information is available at the technical department of your city.

Operating Frequency Range:

• Radio: FM 87.5-108 MHz
• BT: 2.4GHz
• Audio:20 Hz-20 KHz
• Max Output Power: 20 W

Imported by:
DENVER ELECTRONICS A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark
www.facebook.com/denverelectronics

Hereby, Inter Sales A/S declares that the radio equipment type TSP-205 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
http://www.denver-electronics.com/denver-tsp-205/

www.denver-electronics.com

www.facebook.com/denverelectronics

Overview

Smart Watch

1. Touch screen
2. Shortcut key for sport mode
3. Power button
4. Speaker
5. Charging terminals
6. Heart rate sensor 7. MIC

Charging

• If you use a power adaptor (Not included), current of the power adaptor should be: 5V, 500mA.
• It takes 2-hours to fully charge the smart watch, please follow steps below to charge.

1. Make sure the POGO-pins on the charging cable fit correctly onto the charging terminals on the back of smart watch.
2. Plug the big end of the USB cable to a power source.

How to use

Turn on: Hold press power button in 3 seconds
Go to main menu: Swipe from right to left on watch face interface
Switch main menu: Swipe up/ down
Confirm: Tap the icon
Exit: Swipe from left to right
Return to watch face interface: Short press power button on any interfaces
Sport mode shortcuts: Short press the shortcut key for sport mode
Check notifications: Swipe from left to right on watch face interface
Switch submenu/ shortcuts: Swipe up/ down
Turn off: Hold press power button in 3 seconds

When turning on smart watch, you will see the watch face.
From the watch face interface, swipe left to get into main menu, right to get connection reminder or notification shortcut page, up to get sports data and down to get basic settings.

Install “Denver Smart Life” app on the phone

Search and install the “Denver Smart Life” app from Google Play or App Store. Or scan the following QR code to directly install the app.

Connect smart watch with phone

Mobile phone requirement: Android 4.4 or above, iOS7.0 or above.
Step 1: Paring SW-660 to the app
Enable Bluetooth on your smart phone and your smart watch. Open DENVER Smart Life app on your smart phone, set up your profile on Settings.
Tap “Denver SW-660” picture on Settings, select the name of your smart watch (or your smart watch name LE on iPhone) and select your device in the list for connection.
Step 2: Pairing for calling function
Go to Phone “Settings” → “Bluetooth” and select your smart watch name in the list of devices for connection.

Unbind smart watch with mobile phone

1. Open “Denver Smart Life” on your smart phone.
2. Tap “Disconnect smart watch” on Settings.
3. Forget your device on your smart phone Bluetooth settings.

Watch face

Long press current watch face, you can swipe left and right to choose the watch face you prefer.

Shortcuts(swipe from up to down on watch face)

Gesture reminder
Gesture reminder, you can click the icon to turn on and off.

Power saving mode
In power saving mode, all functions will be off and only the current time will be displayed.

Do not disturb mode
Do not disturb mode, you can click the icon to turn on and off.

Sound
You can switch the sound mode by clicking the icon.

Sport mode

Short press the shortcut key for sport mode to get in, or swipe left on the watch face to enter in sport mode. There are 5 sport modes- outdoor run, walking, climbing, cycling, and indoor running. Slide up/ down to select the sport mode you want to start.

1. GPS

a. When using GPS function, make sure to manually activate it before usage.
b. Go outdoors or an open area.
c. The front of the device should be oriented toward the sky.
d. Please wait a few seconds while the device locates satellites.

2. Sports tracking

Current GPS status, mileage, and time spent of your sport etc. will be displayed.
Swipe from left to right, record of your sport data will be paused. Click “Resume” to return and display real-time data of your sport. Click “End” to end your sport, your sport data will be saved automatically, and the sport data page will pop up. Please note, if your sport time is very short, sport data cannot be saved.

3. History

You can view your sport history with detailed sport data, such as mileage, cost time, average pace, calories etc. And you can slide to the bottom and click delete to delete this sport history.

4. Sport Setting

Target setting: you can set mileage, consume, time or just free mode for your sport. Alert settings: you can turn on or off some alerts here. Personal data: you can set your personal information here.

Pedometer

The watch has built-in pedometer, and will track your steps during the day. In the app you can set up your daily goal. You can also turn on sedentary alarm and it will remind you to do some sports.

You can swipe 3 times from down to up on watch face to test heart rate. Make sure your smart watch fits snugly against your wrist when measuring your heart rate.

Sleep monitor

The watch also registers your sleep and will give you an overview over your sleep in the app (show you how many hours of deep sleep and light sleep you had). You can swipe 4 times from down to up on watch face to check sleep data.

You can both make a call and take a call on the watch itself. There are built-in speaker and microphone. (Please note that you need to hold the phone within Bluetooth range). To make a call, please swipe twice from up to down on watch face, and you will find the dial keys.

Make sure both notification access on your phone and notification in app settings are on. To check notifications, swipe from left to right on watch face, and click the message you need to read.

Weather

Once the watch is successfully connected to the app, you can set the weather in the app and the weather can be checked on your watch.

You can use the stopwatch to calculate the time. Tap to start the stopwatch, tap to pause ,tap to reset the stopwatch

Alarm

You can set new alarms here.

After successfully connected with your phone, you will see call history of your phone here.

Phonebook

After syncing with phone, you can check phone book here.

Camera

To enjoy this feature, make sure the camera of your smart phone is on. Enabling Remote capture function will let you take pictures remotely from your smart watch.

More other functions

Swipe up/down or left/right to enjoy more smart functions.
We hope you like your new smart watch. If you want more information there is a full manual in English on our website.
Please notice – All products are subject to change without any notice. We take reservations for errors and omissions in the manual.

ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S

Electric and electronic equipment and included batteries contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment and batteries) is not handled correctly.

Electric and electronic equipment and batteries is marked with the crossed out trash can symbol, seen below. This symbol signifies that electric and electronic equipment and batteries should not be disposed of with other household waste, but should be disposed of separately.

As the end user it is important that you submit your used batteries to the appropriate and designated facility. In this manner you make sure that the batteries are recycled in accordance with legislature and will not harm the environment.

All cities have established collection points, where electric and electronic equipment and batteries can either be submitted free of charge at recycling stations and other collection sites, or be collected from the households. Additional information is available at the technical department of your city.

Hereby, Inter Sales A/S declares that the radio equipment type SW-660 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:

Please enter: www.denver-electronics.com and then click the search ICON on topline of website. Write mode number: SW-660
Now enter product page, and red directive is found under downloads/other downloads.
Operating Frequency Range: 256MHZ Max Output Power: 0.56W Warning Lithium battery inside
DENVER ELECTRONICS A/S
Omega 5A, Soften
DK-8382 Hinnerup
Denmark
www.facebook.com/denverelectronics

DENVER Bluetooth Speaker Instruction Manual

BTL-62

www.denver-electronics.com
Before operating this product, please read this instruction manual carefully and completely.

Operation Instruction

When you turn on the speaker, it will by standard start in Bluetooth model. You can then easily pair with your smartphone or PC with Bluetooth function. If you don’t pair it within 10 minutes, the speaker will go into sleep mode, and you have to turn it off/on to pair again.

Press “M” button to switch functions.

Button Instruction

1. : Power Key
2. LINE port: 3.5 audio input port
3. Play/Pause: Pause and play in play mode.
4. − Volume down/Next: Long press to decrease volume. In FM mode, short press to switch PRE frequency. In music mode, short press to switch previous song.
5. + Volume up / PRE: Long press to increase volume, In FM mode, short press to switch to next frequency, In music mode, short press to switch to next song
6. M – mode switch: switch to FM radio mode, in “FM” mode, long press 3 seconds to Tune.
   (Note: short press=hold the key for less than 1 second, Long press=hold the key for about 3 seconds)

Light control button:

Light flash when on mode (Full color sine move up and down)

1. Press one time for 1st mode (multicolor lights flash to rhythm of the music)
2. Press two times for 2nd mode (multicolor lights flash in a graphic form)
3. Press three times for 3rd mode (two color lights flash alternatively)
4. Press 4th mode 4 (light off)
5. Press again light back to default status.

 light mode button:

How to turn ON and OFF

Long press the key to turn ON and long press the key to turn OFF.

Connection Instructions

How to connect Bluetooth devices (Mobile Phone/Laptop/iPhone/iPad, etc.)

1. Turn on speaker and make sure it is in Bluetooth mode. The blue indicator flashes and a beep sound.
2. Enter Bluetooth settings on your smartphone or PC, find BTL-62 on the list over Bluetooth units, and choose it to pair.
3. After successfully paired, the speaker will give a beep, and on your phone it will show that the speaker is connected.
4. After successful connection, Bluetooth devices can play to the speaker. Blue light will flash slowly when it is in Bluetooth play mode.

How to use AUX input mode.

In any mode, insert 3.5mm to the Bluetooth speaker, and to the audio source you want to listen to. The Bluetooth speaker will automatically change to AUX input.

How to operate FM radio

Press M to enter FM mode. Then long press M to make automatically search for channels. The blue indicator flashes. When finished, the system will automatically play the first found station. Short press + or − to change stations.
Note: Please insert USB cable for better FM receival. It works as an antenna.

How to charge the speaker

Please charge the speaker before first time use. Plug one part of the USB charge cable into the speaker Micro USB port, and the other part to a computer USB port or an external USB adaptor (not included). Charging the battery fully may take up to 6 hours (first time please extend charging time). When charging has finished the red indicator will turn off.

FAQ

Cannot connect and play

1. Check Bluetooth settings on your phone or PC. (Some PC’s cannot be used for Bluetooth audio)
2. Check if the speaker are properly charged. If the red indicator flashes when you turn on the speaker, please charge it.
3. Please turn off, pair the Bluetooth unit again, and try once more.
   *If the above doesn’t solve your problems, please contact the store where it is bought.

Bad radio reception

• Research the station at an open place
• Insert USB cable as external antenna to enhance reception

Please notice – All products are subject to change without any notice. We take reservations for errors and omissions in the manual.

Copy Right

ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S

www.denver-electronics.com

Electric and electronic equipment and included batteries contains materials, components and substances that can be hazardous to your health and environment, if the waste material (discarded electric and electronic equipment and batteries) is not handled correctly.

Electric and electronic equipment and batteries is marked with the crossed out trash can symbol, seen below. This symbol signifies that electric and electronic equipment and batteries should not be disposed with other household waste, but should be disposed of separately.

As the end user it is important that you submit your used batteries to the appropriate and designated facility. In this manner you make sure that the batteries are recycled in accordance with legislature and will not harm the environment.

All cities have established collection points, where electric and electronic equipment and batteries can either be submitted free of charge at recycling stations and other collection sites, or be collected from the households. Additional information is available at the technical department of your city.

Hereby, Inter Sales A/S declares that the radio equipment type BTL-62 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.denverelectronics.com, and then click the search ICON on topline of website. Write model number: BTL62. Now enter product page, and red directive is found under downloads/other downloads.

• Operating Frequency Range: 2.402-2.480 GHz
• Max Output Power: 2.06 dBm

Warning: Lithium battery inside

• Imported by:
• DENVER ELECTRONICS A/S
• Omega 5A, Soeften
• DK-8382 Hinnerup
• Denmark

Facebook: www.facebook.com/denverelectronics

INSTRUCTION MANUAL
DENVER BTH-251

facebook.com/denverelectronics

Congratulations on your new Bluetooth headset. Please read this manual before using it to make sure you use it correctly.
Warning: Lithium battery inside

Headset overview

1. Ensure that your phone or Bluetooth device is switched on.
2. To pair the headset that has not been previously paired with a device, please switch on the headset by push and hold the power button for approximately 3 seconds., the headset  starts in Bluetooth search mode (red/blue light flashes quickly)
3. Activate Bluetooth on your phone or Bluetooth device, and set it to search for Bluetooth device.
4. Select “BTH-251” from the list of found devices on your phone or Bluetooth devices.
5. When Bluetooth is paired successfully, there will be a prompt tone, and the blue light flashes only.

Switch On
After the unit has been paired (look above), just hold power until the LED lights up and then let go. When it has been paired it will automatically reconnect once turned on.
Switch Off 
To switch off, press and hold the Power key for about 3 seconds. There is a prompt tone and a red indicating light. If the headset is not connected to a device within 5 minutes, it switches off automatically.
Adjust the Volume
Turn volume up or down by short push on volume +/- key during a calling or while listening to music. When the volume reaches to maximum, there is a warning tone.
Charge the Battery
Please insert the Micro USB end of the included USB cable into the USB micro port charger connector under the right ear-cap of the headphone, and plug the other end into a USB port on your computer or other devices made for USB  charging. The indicator light will be red while charging. Once fully charged, the indicator light shows blue. Charge time is approximately 2-3 hours if the battery is empty. The fully charged battery has power for up to 6 hours of talking and/or music time (and up to 300 hours of standby time).
Calls
To answer or end a call, push once on the phone key to answer or reject a call. End a call with a short press on the phone key.
Passive model
You can use DENVER BTH-251 as a wired headphone. Simply connect the headset to your MP3 player with 3.5mm audio cable.

Caution:

1. Please avoid very high volume for a constant period of time. This may damage your hearing.
2. If not used for a long time, make sure to charge it once every 6 months. 3. Battery is built-in and it is not replaceable.
3. Please keep the headset away from wet areas. Do not use in rain or moist weather.
4. The operating temperature is 5°C to 35°C. Please don’t put the headset on fire to avoid battery blast accidents.

Please notice – All products are subject to change without any notice. We take reservations for errors and omissions in the manual.

ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S

Electric and electronic equipment and included batteries contain materials, components, and substances that can be hazardous to your health and the environment if the waste material (discarded electric and electronic equipment and batteries) is not handled correctly.

Electric and electronic equipment and batteries is marked with the crossed-out trash can symbol, seen above. This symbol signifies that electric and electronic equipment and batteries should not be disposed of with other household waste, but should be disposed of separately.

As the end-user, it is important that you submit your used batteries to the appropriate and designated facility. In this manner, you make sure that the batteries are recycled in accordance with the legislature and will not harm the environment.

All cities have established collection points, where electric and electronic equipment and batteries can either be submitted free of charge at recycling stations and other collection sites or be collected from households.
Additional information is available at the technical department of your city.

Hereby, Inter Sales A/S declares that the radio equipment type BTH-251 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.denver-electronics.com and then click the search ICON on a topline of website. Write model number: BTH-251. Now enter the product page, and the red directive is found under downloads/other downloads.
Operating Frequency Range: 2402Hz-2480KHz
Max Output Power: 15mW

DENVER ELECTRONICS A/S
Omega 5A, Soften
DK-8382 Hinnerup
Denmark
www.facebook.com/denverelectronics

Model: SW-500

Congratulations with your new DENVER SW-500 Smartwatch. This watch has a lot of smart functions, so we suggest that you take a few minutes and read this short manual.

Caution – please read carefully!

• Do not try to open your smartwatch.
• Do not expose to water or high moisture. The smartwatch is not waterproof.
• Only charge with the original charging cable included in this package.
• Do not attempt to replace the smartwatch battery yourself. You may damage the battery which can cause overheating and injury. The lithium battery should be replaced only by a skilled engineer and must be recycled or disposed in a proper way.
• To avoid damaging the smartwatch, do not place it near water like vases, filled sinks, bathtubs etc.
• If using a PC in order to charge the smartwatch (via the USB port), please make sure the PC is turned on. If it goes into hibernate mode, it will stop charging.
• It is also possible to use USB charger for e.g. smartphone or tablet. If you use that, make sure to read the safety instructions for the particular adaptor.
• Correct disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and connect systems or contact the retailer where the product was purchased.
• Please notice, the heartrate sensor in this smartwatch is not a medical device and cannot be used for that purpose. If you have a condition where you or your doctor want to monitor your heartrate, you should use a professional medical device instead. This smartwatch heartrate sensor is meant for use when doing sports and being active.
• Please consult with your doctor before use, if you have pacemaker or other things that might be affected by using optical heartrate sensor and/or GPS system.

Main features

• Bluetooth smartwatch with GPS function & heartrate sensor
• Multi-Sport mode (running, walking, hiking, biking, indoor run & trail run)
• Track your sport performance, get heartrate shown and map over your route
• Built-in altimeter, barometer and temperature
• Use it as pedometer to track your daily steps and quality of sleep
• Synchronize phonebook and answer or reject calls directly on the watch
• Display SMS, emails, calendar events and social media activity
• Remote control music playback, remote capture photo on smartphone
• 350mAh lithium polymer battery with 5-7 days standby time
• Compatible with iOS7 or above and Android 4.4 and above

Overview

Smart Watch

1. MIC
2. Barometer sensor
3. Touch screen
4. Shortcut key for Sport mode
5. Digital crown
6. Power button
7. Speaker
8. Heart rate sensor
9. POGO-Pin Charging terminals
   POGO-Pin Charger
   
10. POGO-Pin
11. Micro-USB port
    

Charging

• If you use a Power Adaptor (Not included), Power Adaptor current is: 5V, 500mA.
• It takes 2-hours to fully charge the smart watch, please follow steps below to charge.

1. Put the charging cradle beneath the watch. Make sure the
   POGO-pins on the cradle fit correctly onto the charging terminals on the back of smart watch.
2. Connect the charging cradle with the USB cable
3. Plug the big end of the USB cable to a power source Charging when power off Charging when power on
   
   

How to use

• Turn on: Hold press power button in 3 seconds
• Go to main menu: Swipe from right to left on watch face interface
• Switch main menu: Swipe up/ down
• Confirm: Tap the icon or press digital crown
• Exit: Swipe from left to right
• Return to watch face interface: Short press power button on any interfaces
• Sport mode shortcuts: Press the upper button
• Check notifications: Swipe from left to right on watch face interface
• Switch submenu/ shortcuts: Swipe up/ down or Turn digital crown
• Turn off: Hold press power button in 3 seconds
  

When turning on smart watch, you will see the watch face.
Swipe left to get into sport mode, right to get into notification mode, up to get into settings and down to get into activity info screen.
If you connect more faces in settings you can slide to those aswell by swiping either up/down or left/right.

Pair with smart phone
Mobile phone requirement: Android 4.4 and above, iOS7.0 and above

Search for, and download app called: DENVER SW-500 from Google Playstore or Apple Appstore.

1. Enable Bluetooth on your smart phone
2. Open DENVER SW-500 App on your smart phone, set up your profile on Settings.
3. Tap “Connect Smart Watch” on Settings, select the name of your smart watch (or your smart watch name_LE on iPhone) in the list of devices for connection.

Step 2: Pairing for calling function (Only for iPhone)
Go to iPhone “Settings ”→”Bluetooth” and select your smart watch name in the list of devices for connection.

Bluetooth icon explanation

	Means Bluetooth 3.0 connected (for making and receiving calls with smart watch)
	Means Bluetooth 4.0 connected (for activity data and notifications synchronization)
	Means Bluetooth3.0 & 4.0 connected

GPS icon explanation

	Means GPS is off;
	Means GPS is on;

Sport mode

If you have turned on both GPS and Heartrate function, when using the watch for sports, it will track your route & heartrate. After your activity you can see this information in the app.

1. You can press the shortcut key of sport mode or tap below icon on main menu to enter sport mode.
   
2. Multi-Sport mode: with 6 sport mode as below.
   Slide up/ down (or turn the digital crown) to select the sport mode you want to start

When using GPS function
a. Go outdoors to an open area, The front of the device should be oriented toward the sky.
b. Wait while the device locates satellites.

Pedometer

The watch has built-in pedometer, and will track your steps during the day. In the app you can set up your daily goal. You can also turn on sedentary alarm.
The watch also registers your sleep and will give you an overview over your sleep in the app (show you how many hours of deep sleep and light sleep you have)

Voice activation

You can use the watch with Siri/Google talk when connected to your smartphone. E.g. ask it to send an SMS, ask what the weather is like (this information will be shown on your phone, not on the watch).

Calls

You can both make a call and take a call on the watch itself. There are built-in speaker and microphone. (please notice you need the phone within Bluetooth range).

SMS/notifications

Will be shown on the watch when paired with your smartphone.

We hope you like your new smartwatch. If you want more information there is a full manual in English on our website.

ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S

www.denver-electronics.com

Electric and electronic equipment and included batteries contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment and batteries) is not handled correctly.

Electric and electronic equipment and batteries is marked with the crossed out trash can symbol, seen below. This symbol signifies that electric and electronic equipment and batteries should not be disposed of with other household waste, but should be disposed of separately.

As the end user it is important that you submit your used batteries to the appropriate and designated facility. In this manner you make sure that the batteries are recycled in accordance with legislature and will not harm the environment.

All cities have established collection points, where electric and electronic equipment and batteries can either be submitted free of charge at recycling stations and other collection sites, or be collected from the households. Additional information is available at the technical department of your city.

Hereby, Inter Sales A/S declares that the radio equipment type SW-500 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
http://www.denver-electronics.com/denver-SW-500/

Operating Frequency Range: 256MHZ
Max Output Power: 0.56W

Imported by:
DENVER ELECTRONICS A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark
www.facebook.com/denverelectronics