CAUTION: Carefully read instructions and procedures for safe operation. DO NOT USE if this product should become damaged and/or components are broken, inspect this product for damaged hardware, loose joints, loose bolts or other fasteners, missing parts or sharp edges before and after assembly. Assembly of this product will require two people.
Please store this manual in the plastic pouch for future reference.
An on Customers living in the United States and Canada
If you are missing parts, or hardware, or if your product has been damaged during shipping,
DO NOT RETURN YOUR PRODUCT
The store does not stock parts and may not be able to help you. Contact Stork Cra directly and we will ship you the parts you need to your shipping address at no cost to you. We have three convenient ways for you to reach us:
- Visit us to order parts online
- Email us at
- Call us toll-free from the USA or from Canada at 1-877-274-0277, Monday to Friday from 7:00 am 3:00 pm.
WARNING
Failure to follow these warnings and the assembly instructions could result in serious injury or death.
- Read all instructions before assembling the crib. KEEP INSTRUCTIONS FOR FUTURE USE.
- Infants can suffocate on soft bedding. Never add a pillow or comforter. Never place additional padding under an infant.
- The mattress used in this crib should not be more than 6 inches (15cm) thick and should be of such length and width that the gap between the mattress and the sides of the crib is not more than 1 3/16 inches (3cm) when the mattress is pushed into the corner of the crib.
- Infants can suffocate in gaps between crib sides and a mattress that is too small.
- Check this product for damaged hardware, loose joints, loose bolts or other fasteners, missing parts or sharp edges before and after assembly and frequently during use. Securely tighten loose bolts and other fasteners. DO NOT use the crib if any parts are missing, damaged or broken. Contact Stork Craft for replacement parts and instructional literature if needed. DO NOT substitute parts.
- To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep unless otherwise advised by their physician.
- DO NOT use a water mattress with this crib.
- Never use plastic shipping bags or another plastic films as mattress covers because they can cause suffocation.
- If re-finishing, use a non-toxic finish specified for children’s products.
- DO NOT use this crib if the attached or enclosed instructions cannot be strictly adhered to.
- Follow warnings on all products in a crib.
STRANGULATION HAZARD
- Strings can cause strangulation! Do not place items with a string around a child’s neck, such as hood strings or pacifier cords. Do not suspend strings over a crib or toddler bed for any reason or attach strings to toys.
- To help prevent strangulation tighten all fasteners. A child can trap parts of the body or clothing on loose fasteners.
- DO NOT place a crib near a window where cords from blinds or drapes may strangle a child.
FALL HAZARD
- When a child is able to pull up to the standing position, set the mattress to the lowest position and remove bumper pads, large toys, and other objects that could serve as steps for climbing out.
- Stop using the crib when the child begins to climb out or reaches a height of 35 inches (89 cm).
CAUTION: ANY MATTRESS USED IN THIS CRIB SHALL BE AT LEAST 27 1/4 INCHES BY 51 5/8 INCHES (69 CM X 131 CM) WITH A THICKNESS NOT EXCEEDING 6 INCHES (15 CM) AND A MINIMUM MATTRESS THICKNESS OF 4 INCHES (10 CM). THIS PRODUCT CONFORMS TO APPLICABLE REGULATIONS PROMULGATED BY THE CONSUMER PRODUCT SAFETY COMMISSION.
DISTRIBUTED BY
3993 Howard Hughes Parkway, Unit# 250 Las Vegas, NV, USA. 89169 Tel: 1 877 274 0277
e-mail: [email protected]
Identifying the parts
- Left Front Post
- Right Front Post
- Left Back Post
- Right Back Post
- Crib End
- Crib Left End Top X 1
- Crib Right End Top X 1
- Back Rail Bottom
- Front Rail
- Stretcher Bar
- Mattress Support
- Back Rail Top
- Back panel
ASSEMBLY INSTRUCTIONS
HARDWARE AND TOOL DIAGRAM
THIS PRODUCT USES IMPERIAL THREADED HARDWARE
- BOLTS
- BOLTS
- BOLTS
- BOLTS
- Barrel nut
- Wooden dowel
- Allen Key
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
- After assembly Tighten bolts firmly and retighten periodically
Spring shown here in Lowest position.
NOTE: We recommend setting the spring in the highest position for newborn babies. Lower the mattress spring as the child grows and becomes more mobile.
Step 7
TO CONVERT TO A TODDLER/DAY BED
WARNING
Failure to follow these warnings and the assembly instructions could result in serious injury or death from entrapment or strangulation.
- DO NOT place bed near windows where the cord from blinds or drapes may strangle a child.
- The child must be at least 15 months old and not more than 50 lbs. to use this bed.
- Use a full-size crib mattress as specified for this bed.
- The mattress used in this bed must have a minimum dimension of 51 5/8” x 27 1/4” x 4” and a maximum of 6” thick.
- Do not place items with a string, cord, or ribbon around a child’s neck, such as hood strings or pacifier cords.
- Do not suspend strings over a toddler bed for any reason
Step 8
Converting Crib to a Full-Size Bed
You have the option to convert the crib to a full-size bed. Simply disassemble the crib to get the headboard components shown below. Attach it to a full-size metal bed frame (NOT INCLUDED) to convert to a full-size bed.
Headboard
- (Full size Bed Frame Sold Seperately ; Styles may vary)
STORAGE AND CARE
- DO NOT remove any part that is attached with wood screws, The stationary side rail, mattress base can all be disassembled for storage. Simply review the assembly instructions for each and reverse the order to disassemble. Wipe all parts with a dampened clean cloth. DO NOT use abrasives. To convert to a double bed please follow the instructions in the double bed kit. (MUST BE PURCHASED SEPARATELY)
LIMITED ONE-YEAR WARRANTY
Your product is warranted against defects in workmanship or material for ONE YEAR from the date of the original purchase. This warranty shall be limited to, at the discretion of the company, repairing or replacing any part of the product which, in the opinion of the company, shall be proved defective in materials or workmanship under normal use and service during the one year warranty period. Shipping charges may apply for addresses outside of the continental United States and Canada. Date of purchase of the product must be established by production of your sales receipt or other satisfactory evidence.
HOW TO GET PROMPT, EFFICIENT SERVICE
Contact our customer care department. The telephone number and hours of operation are listed below. When calling our customer care department, make sure to mention the model number and date of manufacture. Both can be found on the end panel.
- Model
- Pack Date
- Date of Purchase
- Customer Service Direct Telephone line: 1- 877-274-0277 Fax: (604) 274-9727
- Hours of operation: 7:00 AM to 3:00 PM, Pacific Standard Time e-mail: [email protected]
DISTRIBUTED BY
Stork Craft Mfg. (USA), Inc., 3993 Howard Hughes Parkway, Unit#250 Las Vegas, NV, USA.89169 Tel: 1 877 274 0277 e-mail: [email protected] Twitter @Storkcraft
