TH2210DH1000/U, TH2110DH1002/U
Operating Manual [pdf]: PRO 2000 Series
Installation Guide [pdf]: TH2000DH Series
How do I fix a blank display on my TH2210DH/TH2110DH thermostat?
If the thermostat is battery powered, check/replace your batteries. If the device is common wired, try and power it up with batteries. If that fails to power up the thermostat, you may need to involve a technician. If batteries do power up your common wired thermostat, check your breakers, furnace power switch, furnace door kill switch to insure your system is powered. If your system is fine, and the thermostat only works on batteries, you may need to involve a technician.
Why is my TH2210DH/TH2110DH showing an error message Lo Bat? What does it mean?
Replace the Battery.
How do I turn on/off my heating/cooling on my TH2210DH/TH2110DH/TH2210DV/TH2110DV series thermostat?
Locate the system Slider Switch labeled Heat Off Cool. Slide the switch to the desired setting and either manually adjust the arrows to the desired set point and press hold or establish a schedule for heating and cooling.
How do I program the schedule on my TH2210DH/TH2110DH/TH2210DV/TH2110DV thermostat?
Locate the system Slider Switch labeled Heat Off Cool. Slide the switch to the desired setting and either manually adjust the arrows to the desired set point and press hold or establish a schedule for heating and cooling.
For the 2000 family schedule:
- Press the Set button 3 times until Set Schedule appears. The start time of the first period (Wake) of the week days (Mon-Fri) will flash.
- Press the up or down button to set the time.
- Press the Set button. The temperature setting for that period will flash.
To program the temperature settings for the cooling mode, place the System switch in Cool. To program the temperature settings for the heating mode, place the switch in Heat.
- Press the up or down button to set the temperature.
- Press the Set button. The start time of the next period will flash.
- Repeat steps 2 through 6 for each of the remaining periods.
- Once all adjustments are made, press the Run button to save them and exit. (The changes are also saved if you do not press any button for 60 seconds.)
To skip a period (except Wake), press the Hold button for 4 sec. while that period is displayed.
To bypass the schedule press the Hold button from the main screen.
How do I bypass the schedule on the TH2210DH/TH2110DH/TH2210DV/TH2110DV thermostat?
Press up or down to immediately adjust the temperature. This will temporarily override the temperature setting for the current time period. “Temporary” will appear on the display and the current program period will flash. The new temperature will be used until the next period begins.
To permanently ignore the schedule, press up or down until the desired temperature is displayed. Then, press the Hold button to maintain the new temperature indefinitely. The word Hold will appear on the screen.
Press the Run button if you wish to cancel either override and resume the schedule. The word Hold will disappear and the thermostat will be set to the temperature programmed for the current period. Also ensure that the heat – off – cool switch is set to the desired run mode.
Remember, after you set the desired setpoint and select your desired hold the thermostat will change back from displaying your setpoint to the room temperature. This is normal. Allow your heating or cooling system to reach your setpoint over time
Does the TH2210DH/TH2110DH/TH2210DV/TH2110DV thermostats work with heat pumps with auxiliary/backup heat?
TH2210DH/TH2110DH/TH2210DV/TH2110DV will work with a stand alone heat pump. The TH2210DV and TH2210DH will work with heat pumps with auxiliary/backup heat.
How do I set the time/date on a TH2210DH/TH2110DH/TH2210DV/TH2110DV thermostat?
Press the SET button, then press up or down arrows to set the clock time.
Press the SET button, then press up or down arrows to select the day of the week.
Press RUN to save & exit.
Does the TH2210DH/TH2110DH/TH2210DV/TH2110DV thermostats work with heat pumps with auxiliary/backup heat?
TH2210DH/TH2110DH/TH2210DV/TH2110DV will work with a stand alone heat pump. The TH2210DV and TH2210DH will work with heat pumps with auxiliary/backup heat.
Does the TH2210DH/TH2110DH/TH2210DV/TH2110DV thermostats work with heat pumps with auxiliary/backup heat?
TH2210DH/TH2110DH/TH2210DV/TH2110DV will work with a stand alone heat pump. The TH2210DV and TH2210DH will work with heat pumps with auxiliary/backup heat.
How do I access the installer setup (ISU) on a series 2000 thermostat?
Enter System Setup:
To enter system setup, press and hold both the up and down buttons until the display changes (approximately 5 seconds).
Changing Settings:
1. Press the up or down button to change the setting.
2. Press the up and down buttons simultaneously for one second to advance to the next function.
3. Press the RUN button to exit and save settings. Please note ISU changes when saved are permanently held in memory and will not be forgotten. If the thermostat is reverting to default programming troubleshoot the application
Operating Manual PRO 2000 Series
Installation Guide TH2000DH Series
How do I set the time/date on a TH2210DH/TH2110DH/TH2210DV/TH2110DV thermostat?
Press the SET button, then press up or down arrows to set the clock time.
Press the SET button, then press up or down arrows to select the day of the week.
Press RUN to save & exit.
How do I fix a blank display on my TH2210DH/TH2110DH thermostat?
If the thermostat is battery powered, check/replace your batteries. If the device is common wired, try and power it up with batteries. If that fails to power up the thermostat, you may need to involve a technician. If batteries do power up your common wired thermostat, check your breakers, furnace power switch, furnace door kill switch to insure your system is powered. If your system is fine, and the thermostat only works on batteries, you may need to involve a technician.
How do I turn on/off my heating/cooling on my TH2210DH/TH2110DH/TH2210DV/TH2110DV series thermostat?
Locate the system Slider Switch labeled Heat Off Cool. Slide the switch to the desired setting and either manually adjust the arrows to the desired set point and press hold or establish a schedule for heating and cooling.
How do I access the installer setup (ISU) on a series 2000 thermostat?
Enter System Setup:
To enter system setup, press and hold both the up and down buttons until the display changes (approximately 5 seconds).
Changing Settings:
1. Press the up or down button to change the setting.
2. Press the up and down buttons simultaneously for one second to advance to the next function.
3. Press the RUN button to exit and save settings. Please note ISU changes when saved are permanently held in memory and will not be forgotten. If the thermostat is reverting to default programming troubleshoot the application.
Operating Manual PRO 2000 Series
Installation Guide TH2000DH Series
How do I program the schedule on my TH2210DH/TH2110DH/TH2210DV/TH2110DV thermostat?
Locate the system Slider Switch labeled Heat Off Cool. Slide the switch to the desired setting and either manually adjust the arrows to the desired set point and press hold or establish a schedule for heating and cooling.
For the 2000 family schedule:
- Press the Set button 3 times until Set Schedule appears. The start time of the first period (Wake) of the week days (Mon-Fri) will flash.
- Press the up or down button to set the time.
- Press the Set button. The temperature setting for that period will flash.
To program the temperature settings for the cooling mode, place the System switch in Cool. To program the temperature settings for the heating mode, place the switch in Heat.
- Press the up or down button to set the temperature.
- Press the Set button. The start time of the next period will flash.
- Repeat steps 2 through 6 for each of the remaining periods.
- Once all adjustments are made, press the Run button to save them and exit. (The changes are also saved if you do not press any button for 60 seconds.)
To skip a period (except Wake), press the Hold button for 4 sec. while that period is displayed.
To bypass the schedule press the Hold button from the main screen.
How do I bypass the schedule on the TH2210DH/TH2110DH/TH2210DV/TH2110DV thermostat?
Press up or down to immediately adjust the temperature. This will temporarily override the temperature setting for the current time period. “Temporary” will appear on the display and the current program period will flash. The new temperature will be used until the next period begins.
To permanently ignore the schedule, press up or down until the desired temperature is displayed. Then, press the Hold button to maintain the new temperature indefinitely. The word Hold will appear on the screen.
Press the Run button if you wish to cancel either override and resume the schedule. The word Hold will disappear and the thermostat will be set to the temperature programmed for the current period. Also ensure that the heat – off – cool switch is set to the desired run mode.
Remember, after you set the desired setpoint and select your desired hold the thermostat will change back from displaying your setpoint to the room temperature. This is normal. Allow your heating or cooling system to reach your setpoint over time.
How do I set the time/date on a TH2210DH/TH2110DH/TH2210DV/TH2110DV thermostat?
Press the SET button, then press up or down arrows to set the clock time.
Press the SET button, then press up or down arrows to select the day of the week.
Press RUN to save & exit.
How do I fix a blank display on my TH2210DH/TH2110DH thermostat?
If the thermostat is battery powered, check/replace your batteries. If the device is common wired, try and power it up with batteries. If that fails to power up the thermostat, you may need to involve a technician. If batteries do power up your common wired thermostat, check your breakers, furnace power switch, furnace door kill switch to insure your system is powered. If your system is fine, and the thermostat only works on batteries, you may need to involve a technician.
Why is my TH2210DH/TH2110DH showing an error message Lo Bat? What does it mean?
Replace the Battery.
