Loading manuals...

iiglo E-Zee Ergo Sitstand Desk Manual


iiglo E-Zee Ergo Sitstand Desk Manual Image

iiglo E-Zee Ergo Sitstand Desk Instruction Manual

Attention: The drawings below are only for reference which might be slightly different from the actual object, please in kind prevail. Any tools missing or installation problems, please contact the customer service firstly.

Part List

Installation Instruction

FIG 4 Installation Instruction

Technical Data

How to use hand switch

Operation Instruction

Troubleshooting:

  1. Reset: When the LED shows”RST” , press “▼” button until the desk reaches its lowest height and rebounds to stop, it means the reset has been finished.
  2. When it does’t work and the LED shows “E01” or “E02”, please retry 18 mins later.
  3. If the “▼” button does’t work, please check the cable connection and then cut off thepower for at least 10 seconds. Reconnect to the power and press “▼” button to start the reset process when it shows the “RST’.
  4. If all these above process are inefficient, plz contact our customer service.

Common fault treatment

The following tips will help you detected and eliminate the common fault and error. If the fault you met is not listed below, please contact with your supplier. Only the manufacturer and professionals are capable for investigating and correcting those fault and error.

Attention

  1. Power supply: AC1 OOV-240V,50/60HZ
  2. Service Environment: 0-40°C
  3. Unplug the power plug before cleaning, wipe the dust on surface with slight wet dishcloth when cleaning, be careful not to let the drops into the internal parts, not loose the connector.
  4. The electric box contains electronic components, metals, plastics, wires etc., so dispose of it in accordance with each country’s environmental legislation, not the general household waste.
  5. Check carefully to ensure correct and complete assembly before using.
  6. Be familiar with all functions and program settings of the product before first use.
  7. Children are forbidden to play on the product because of unforeseen action when playing, so any dangerous consequences caused by this improper action will not be on manufacturers.
  8. Slight noise caused by the V-ribbed belt or brake system due to structure will not have any effect on the use of the equipment.
  9. Corrosive or abrasive materials are forbidden to clean the equipment. Must ensure that the cleaner used will not pollute the environment.
  10. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.
  11. Cleaning and user maintenance shall not be made by children without supervision.
  12. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or a
    similarly qualified person in order to avoid a hazard.
  13. Please make sure there is no hazard sources in your operating environment. e.g., do not litter the tools around. Always be careful to treat the packaging materials in order to avoid any possible danger, e.g. plastic bag may lead to choking hazard to children.
  14. Keep the original package of the equipment if necessary in case of the future use in transportation.

Waste disposal

This marking indicates that this product should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.


More Manuals From iiglo