Loading manuals...

mophie Powerstation go air Manual


mophie Powerstation go air Manual Image

powerstation® go air
OPERATING INSTRUCTIONS

mophie power station go air
Thank you for choosing mophie!
Powerful and loaded with features including an easy-to-use digital display, the mophie power station go air can be used to safely jump-start your vehicle or inflate your tires. The mophie power station go air provides portable power so you can charge your phone, tablet, and other electronic devices anywhere! The mophie power station go air also includes a convenient floodlight and emergency light. Compact, versatile and simple to use, the mophie power station go air and all accessories fit neatly in its carrying pouch and is perfect to store in your home or vehicle for everyday use or an emergency need. Never be without a charge, a jump start, or with a flat tire again!

DANGER-CAUTION Read and understand all safety information before using this product. Failure to follow these instructions may result in electrical shock, explosion, the fire which may result in serious injuries, death or property damage.
– When used correctly, lithium-ion rechargeable batteries provide a safe and dependable source of portable power. However, if they are misused or abused, this may result in leakage, burns, fire or explosion, causing personal injury or damage to other devices.
– Misusing or incorrectly connecting your mophie power station go air may cause electric shock to users and damage equipment.
– Do not operate in explosive atmospheres such as in the presence of flammable liquids, gases or dust.
– Remove jump start clamps from vehicle battery after jump starting vehicle.
– Keep your mophie power station go air dry and away from moisture and corrosive materials. The mophie powerstation go air should not be used near water or wet areas such as bathtubs, showers, bathrooms, sinks, swimming pools or basements.
– Do not expose your mophie power station go air to moisture, water, rain, or snow.
– Keep your mophie power station go air away from heat sources, including open flames, radiators, stoves, ovens, and any other devices that produce heat.
– The lithium-ion rechargeable battery used in this charging device may present a risk of fire or chemical burn if mistreated. Do not expose to fire or excessive temperature. Do not expose to heat above 212°F (100°C) or incinerate.
– In the unlikely event of leakage or explosion use sand or a chemical fire extinguisher.
– Your mophie power station go air may become warm under extended high power operation. Do not cover, wrap, or otherwise restrict the mophie power station go air during operation.
– Do not disassemble your mophie power station go air. There are no user-serviceable parts inside. Incorrect reassembly may result in shock or fire hazards.
– Do not drop or subject to strong impacts. Do not operate your mophie powerstation go air if it has received a sharp blow, or has otherwise been damaged in any way.
– Do not puncture, crush or subject to mechanical shock.
– Only charge your mophie powerstation go air by the specified method with the specified charging adapter provided with the unit.
– Do not use any non-mophie-branded accessories with the mophie powerstation go air. Doing so may cause electric shock to users and damage equipment.
– The mophie powerstation go air, along with its accessories, are not toys and should be kept away from children.
– Make sure the jumper cables are fully plugged into the jump start output before trying to jumpstart your vehicle.
– Do not touch red (positive) and black (negative) jumper clamps together at any point.
– Do not insert any foreign object into the ports or openings of your mophie power station go air.
– Do not clean your mophie powerstation go air with harsh chemicals, soaps or detergents. Just wipe the case with a soft cloth.
– Make sure the mophie powerstation go air’s charging ports do not become contaminated with lint or other debris. Use a canned-air type of product periodically to ensure that the port openings are clear.
– When using the air compressor, always check and follow the manufacturer’s recommended pressure. Use caution as the air hose and connectors may get hot after extended use.
– Batteries should be recycled or disposed of as per state and local guidelines.
– Storage: -4°F – 158°F (-20°C – 70°C), Discharge: 14°F – 122°F (-10°C – 50°C), Charge: 32°F – 113°F (0°C – 45°C)

Included items

– mophie power station go air
– Jumper Cables
– Carrying Pouch
– AC Wall Plug
– 24in Air Hose Extension
– Interchangeable Air Nozzle Kit

  1. Jump Start Output
  2. Jump-Start Button
  3. Digital Screen
  4. Pressure Unit Button
  5. USB Outputs
  6. Pressure Settings (+) and (-)
  7. Air Compressor ON/OFF Button
  8. USB ON/OFF Button
  9. Air Hose
  10. Charging Input
  11. Floodlight ON/OFF Button
  12. Floodlight/Emergency Light
  13. 24 Inch Air Hose Extension
  14. Jumper Cable Clamps
  15. Wall Charging Adapter
  16. Tapered Air Nozzle
  17. Inflation Needle
  18. Presta Valve Adapter

Operating instructions

IMPORTANT: Before using the power station go air for the first time, fully charge it.
To charge your power station go air, use the provided Wall Charging Adapter, and plug the AC adapter plug into the charge input. Next, connect the AC adapter into a wall outlet. The power station go air will automatically begin charging. When the power station go air is fully charged, all five battery indicator lights will be solid white and the digital screen will indicate 100% charge. (This could take up to 9 hours).

While charging, the digital screen will illustrate the charge percentage of the power station go air. When fully charged, disconnect the cable.

NOTE:
The power station go air is designed to charge between 32°F-113°F (0-45° C). A “TEMP” indicator will be illustrated on the digital display if the power station go air is attempted to be charged outside of this temperature range.

Jump starting your vehicle with the power station go air
1. Plug the jumper cables into the jump start output on the power station go air.

NOTE: Make sure the jumper cables are fully plugged into the jump start output before trying to jump your vehicle.
2. Attach the jumper-cable clamps to the vehicle battery.
– Red clamp on positive terminal (+)
– Black clamp on negative terminal (-)

NOTE:
Once the jumper cable clamps are attached to the vehicle battery, the LCD will display the vehicle battery voltage.
– Do not touch red (positive) and black (negative) clamps together at any point. If the jump start button flashes red, the jumper cables have been connected incorrectly. If this flashing red condition occurs, disconnect the jumper cables from vehicle battery and restart the process from Step 1.
3. Press the “Jump Start” button and wait for a solid green light.

NOTE: A flashing green light indicates safety checks are in progress.
Do not disconnect the jumper cables when the Jump-Start button is illuminated solid green. If you wish to cancel a jump-start attempt,  simply press the Jump-Start button again and the solid green light will turn off indicating that the jump-start attempt has been cancelled.
4. Start your vehicle.
NOTE: If your vehicle fails to start after the first attempt, wait 30 seconds and repeat step 3 and step 4. If your vehicle does not start after three attempts, we recommend you consult a certified mechanic.
5. Disconnect the jumper-cable clamps from the car battery.
NOTE:
– The jump start function can not be used in conjunction with USB charging or the air compressor. Please ensure that you have not activated the USB or Air Compressor output modes when attempting to jump-start your vehicle.
– When attempting to jump-start your vehicle, turn off your headlights and any other components that may drain your car battery.
– The power station go air is designed to allow a jump start when used within a safe temperature range. A “TEMP” indicator will be illustrated on the digital display if used outside of the temperature operating range.

Jumpstart troubleshooting tips

Condition Potential Cause Solution
The Jump-Start button has been pressed but  nothing happens The USB ON/OFF Button or the Air  Compressor ON/OFF Button has been pressed. The jump start output can not be used in conjunction with the USB output or air compressor modes. Ensure that both USB and AIR Compressor modes are off.
powerstation go air displays a red “BATT TOO LOW” message
The power station go air is not sufficiently charged to jump start the vehicle. Recharge the powerstation go air and verify at least 50%  charged. Then try the jump-starting process again.
powerstation go air Jump Start button  flashes red and a  SAFETY CHECK FAIL message is displayed
The jumper cables have not been properly connected to the vehicle battery. Check the jumper cables and ensure that the red clamp is connected to the positive terminal (+) and the black clamp is connected to the negative terminal (-).
power station go air Jump Start button  flashes green continuously
The power station go air is waiting to be connected to a battery or a SAFETY CHECK FAIL has been triggered. Check the jumper cables and ensure they are properly connected to the battery. Check and ensure the vehicle battery voltage is greater than 2.0V. If the SAFETY CHECK FAIL  indicator is triggered during the jumpstart process, it is recommended that you consult with a certified mechanic.
powerstation go air displays a blue or red “TEMP” indicator
The powerstation go air has detected a low or high-temperature condition. Disconnect the power station go air and allow the unit to acclimate to temperature operating range (14°F-122°F) (-10°C – 50°C).
You can not successfully jump-start your vehicle. The powerstation go air displays a vehicle battery voltage greater than 12.0V The power station go air detects that it is connected to a vehicle battery with a normal starting voltage. This could indicate that another vehicle component is faulty. It is recommended that you consult with a certified mechanic.
powerstation go air Jump Start and  On/Off button flashes red and white This could occur when attempting to jump-start a vehicle while other electrical components  (i.e. headlights, heater, radio, etc.) are on. Turn off your headlights and any other components that may drain your car battery and try the jump start process again.
The vehicle battery may be faulty. It is recommended that you consult with a certified mechanic.

NOTE: If none of these troubleshooting tips work, please consult a certified mechanic for assistance.

power station go air compressor

The powerstation go air comes equipped with a 24 Inch Air Hose Extension and Interchangeable Air Nozzles. Simply twist on the corresponding nozzle to inflate balls, pool floaties, bike tires, and more!
1. Connect the air hose to the tire or use the appropriate nozzle to connect to your inflatable device.
2. Press the (+) or (-) button to set the desired pressure. The pressure measuring units can be changed by pressing the UNIT button.
3. Once the desired pressure has been set, begin inflating by pressing the Air Compressor ON/OFF button. The air compressor will shut off automatically once the pressure has been reached.

NOTE: The air compressor can be started or stopped at any point by pressing the air compressor ON/OFF button. The (+) and (-) may be long pressed to set the desired pressure quickly.
Note: Always check and follow the manufacturer’s recommended pressure. Use caution as the air hose and connectors may get hot after extended use. The power station go air compressor is designed to automatically stop after an extended run-time or if an over-temperature protection setpoint is reached.

Charging an electronic device using the USB output ports

1. Your powerstation go air is compatible with the charging cable provided with your electronic device. To use, plug the Standard USB end of the cable into either one of the two 5V/2.4A USB Output ports located on your powerstation go air.
2. Turn on the USB charging by pressing the USB Power ON/OFF Button on the powerstation go air.

NOTE: The powerstation go air USB charging feature will automatically power off after 30 minutes of inactivity.

mophie smart charge technology

Your powerstation go air contains mophie SMART CHARGE TECHNOLOGY to achieve greater compatibility for charging standard 5V  USB electronic devices. mophie SMART CHARGE TECHNOLOGY will allow the powerstation go air to communicate with your electronic device and provide the fastest and safest charge for that device.

Compatibility

Standard 5V USB electronic devices including: mobile phones, tablets, PSP, NDS, MP3, MP4, MP5, Bluetooth, GPS, cameras, and more.

Using your powerstation go air floodlight

The floodlight can be turned on and off by simply pressing and releasing the floodlight ON/OFF button. The first press will turn on the floodlight. A second press will turn on the red emergency light. The third press will turn on SOS flashing red light. The floodlight will automatically turn off after 2 hours of inactivity.

NOTE: Do not look directly into the LED floodlight.

Specifications

Battery Pack Energy: ……………………….. contains a 55500 mWh internal battery
Jump Start: ………………………………………… 12V/600Amps
Air Compressor: ………………………………… 100PSI max
Input: ………………………………………………… 14V/0.85A
USB Output: ……………………………………. 2 x USB 5V/2.4A
Dimensions: ……………………………….. 4.65 x 9.52 x 1.85 inches
Weight: …………………………………….. 2.54 lbs
Operating Temperature (During Charging): …………… 32°F – 113°F (0°C – 45°C)
Operating Temperature: ……………………….. 14°F – 122°F (-10°C – 50°C)

Compliance with FCC Regulation

This device complies with part 15 of the FCC Rules and RSS-Gen of IC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
CAUTION: To comply with the limits of the Class B digital device, pursuant to Part 15 of the FCC Rules, this device must be used with certified peripherals and shielded cables. All peripherals must be shielded and grounded. Operation with non-certified peripherals or non-shielded cables may result in interference to radio or reception.

Limited warranty
At mophie, we are dedicated to making the best quality products. To back this up, this product is warranted for 2 years. For full details regarding warranty terms, exclusions and limitations, please visit: mophie.com/warranty. This warranty does not affect any statutory rights that you may be entitled to. Keep a copy of your purchase receipt as proof of purchase. Be sure to register your product at mophie.com.

Customer Service
Telephone: 1-888-8mophie (1-888-866-7443)
International: +1 (269) 743-1340
Web: www.mophie.com/cs
© 2020 mophie inc. mophie, power station, Stay Powerful, and the mophie logo are trademarks of mophie inc. All rights reserved. Patents: mophie.com/patents.



More Manuals From Mophie