Loading manuals...

nedis FSBS100AT Bluetooth Speaker Manual

nedis FSBS100AT Bluetooth Speaker Manual Image

Bluetooth ® speaker 
Wrapped in stylish woven fabric
Quick start guide


nedis FSBS100AT Bluetooth Speaker - A-B

Bluetooth® speaker

For more information see the extended manual online: ned.is/fsbs100at

Intended use
This device is intended to play audio and to have hands-free phone conversations.
Any modification of the product may have consequences for safety, warranty, and proper functioning.

Parts list (Image A)

1. Power button
2. Play/pause button
3. Volume+ button
4. Volume- button
5. Phone button
6. Handle
7. Protective cap
8. Micro USB port
9. Status indicator LED
10.Audio port (3.5mm)
11.Micro USB cable

Safety instructions


  • Only use the product as described in this manual.
  • Do not use the product if a part is damaged or defective. Replace a damaged or defective device immediately.
  • This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
  • Do not charge when the product is wet.
  • Disconnect the product from the electrical outlet and other equipment if problems occur.
  • Do not drop the product and avoid bumping.
  • Do not expose the product to direct sunlight, naked flames or heat.
  • The handle is exclusively intended to carry the weight of the product.
  • Do not immerse the product in water.

Power supply (Image B)

  1. Open the protective cap B1 to expose the ports.
  2. Plug the micro USB cable B6 into the micro USB port of the product B2.
  3. Plug the other end of the micro USB cable B6 into a USB power adapter to charge the product.
    The charging indicator LED B4 lights up red when charging.
    The charging indicator LED B4 stops lighting up when charging is complete.

Pair with Bluetooth
To pair the audio source to the product using Bluetooth, follow these steps:

  1. Press the power button A1 to switch on the product.
    The status indicator LED A9 lights up and the product emits a tone to indicate pairing mode is active.
  2. Activate Bluetooth on your audio source and connect with the product (FSBS100).

Connect with audio cable (Image B)
 Audio cable is not included.

To pair the audio source to the product using an audio cable, follow these steps:

  1. Open the protective cap B1 to expose the ports.
  2. Press the power button B3 to switch on the product.
  3. Plug the audio cable B7 into the audio port B5 to connect the product to your media device.

Button functions (Image C)

C1 Phone button Press to answer or finish a call.
C2 Volume down / previous track button Press the button to decrease the volume.
Press and hold to skip to the previous track.
C2 Volume up / next track button Press the button to increase the volume.
Press and hold to skip to the next track.
C4 Play / pause button Press to play or pause the music.
C5 Power button Press and hold for 2 seconds to turn the product on or off.


Product Bluetooth® speaker
Article number FSBS100AT
Dimensions (l x w x h) 90 x 240 x 65 mm
Weight 472 g
Microphone Built-in
Channels Mono
RMS audio output 10 W
Peak audio output 30 W
Sensitivity 85 dB
Bluetooth frequency range 2402 – 2480 MHz
Bluetooth® version V5.0 + EDR
Transmission distance 10 m
Maximum transmission power 2 dBm
Maximum antenna gain 1 dBi
Battery type Lithium-ion (18650)
Charging input power 5 V / 1 A
Charging time ± 4 hours
Playback/talk time Up to 6 hours
Driver unit Ø 52 mm
Impedance 4 Ω
Frequency response 100 Hz – 16 KHz

Declaration of Conformity

We, Nedis B.V. declare as a manufacturer that the product FSBS100AT from our brand Nedis ® , produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.

The complete Declaration of Conformity (and the safety datasheet if
applicable) can be found and downloaded via webshop.nedis.com/FSBS100AT#support
For additional information regarding the compliance, contact the customer service: Web: www.nedis.com
E-mail: [email protected]
Phone: +31 (0)73-5991055 (during office hours)
Nedis B.V., de Tweeling 28
5215 MC ’s-Hertogenbosch, the Netherlands

Nedis BV
De Tweeling 28, 5215 MC ’s-Hertogenbosch – The Netherlands

More Manuals From nedis