nedis Soundbar SPSB410xx User Manual
Specifications
- RMS: 45 W
- Peak power: 135 W
- Spebaker channels: 2.0
- Bluetooth version: 5.0
- Frequency range: 2402 – 2480MHz
- Max. transmission power: 2 dBm
- Connections: Optical, coax, 3.5mm aux, USB, 1x HDMI output (with ARC)
- Display: LED
- Power input: 100-240V ~ 50/60Hz (45W)
Description
Soundbar
| 1. On/standby button Mode button |
|
| 2. Volume + button | Press the button to increase the volume. |
| 3. Volume – button | Press the button to decrease the volume. |
| 4. Display | The display shows the selected mode.
Note: The display will go off automatically if the device is idle and no input signals are being received for 5 minutes. Press one of the buttons to light up the display. |
| 5. Remote control sensor | Point the remote control to the remote control sensor. |
| 6. USB port | Connect a USB device to the USB port. |
| 7. HDMI output (with ARC) | Connect an HDMI cable to the HDMI output and to the TV.
Note: “ARC” stands for “Audio Return Channel”. ARC transfers a digital audio signal to the HDMI output. The ARC function can be enabled only when the device is connected to a TV that supports ARC and the HDMI cable also supports ARC. |
| 8. Optical input (digital) | Connect an optical cable to the optical input and to the TV or other audio device. |
| 9. Coaxial input (digital) | Connect a coaxial cable to the coaxial input and to the TV or other audio device. |
| 10. AUX input (3.5 mm) (analog) | Connect an AUX cable to the AUX input and to the TV or other audio device. |
| 11. AC input | Connect the power adapter to the AC input and to the wall socket. |
Remote control
| 12. On/standby button |
|
| 13. Mode button | Press the button to select the mode: HDMI (with ARC) / Bluetooth / Optical / Coaxial / AUX / USB. The display shows the selected mode. |
| 14. Play/pause button | Bluetooth: Press the button to play or pause the track.
Note: If the speaker is already connected and you want to connect to a different device, press and hold the button for 3 seconds to stop the current Bluetooth connection and start pairing the new device. |
| 15. Next button | Bluetooth: Press the button to play the next track. |
| 16. Previous button | Bluetooth: Press the button to play the previous track. |
| 17. Volume + button | Press the button to increase the volume. |
| 18. Volume – button | Press the button to decrease the volume. |
| 19. Mute button | Press the button to mute or unmute the sound. |
| 20. Bass + button | Press the button to increase the bass. |
| 21. Bass – button | Press the button to decrease the bass. |
| 22. Treble + button | Press the button to increase the treble. |
| 23. Treble – button | Press the button to decrease the treble. |
| 24. Equalizer button | Press the button to set the equalizer. |
| 25. Battery compartment |
|
Pairing the speaker
- Switch on the device.
- Set the source to Bluetooth.
- Activate Bluetooth on your Bluetooth device.
- Search for new devices on the Bluetooth device.
- Select the device: “SPSB410BK”.
- The Bluetooth device will confirm when the pairing is completed
Safety Instructions
General safety
- Read the manual carefully before use. Keep the manual for future reference.
- The manufacturer is not liable for consequential damages or for damages to property or persons caused by nonobservance of the safety instructions and improper use of the device.
- The device can be used by children from 8 years and above and by persons with a physical, sensory, mental or motor disability, or lack of experience and knowledge if they are supervised or instructed on how to use the device in a safe way and understand the hazards involved. Children shall not play with the device. Cleaning and user maintenance shall not be made by children without supervision.
- Only use the device for its intended purposes. Do not use the device for other purposes than described in the manual.
- Do not use the device if any part is damaged or defective. If the device is damaged or defective, replace the device immediately.
- The device is suitable for indoor use only. Do not use the device outdoors.
- The device is suitable for domestic use only. Do not use the device for commercial purposes.
- Do not use the device in locations with high humidity, such as bathrooms and swimming pools.
- Do not use the device near bathtubs, showers, basins or other vessels containing water.
Electrical safety
- To reduce risk of electric shock, this product should only be opened by an authorized technician when service is required.
- Disconnect the product from the mains and other equipment if a problem should occur.
- Do not use the device if the mains cable or mains plug is damaged or defective.
- If the mains cable or mains plug is damaged or defective, it must be replaced by the manufacturer or an authorised repair agent.
- Before use, always check that the mains voltage is the same as the voltage on the rating plate of the device.
- Do not move the device by pulling the mains cable. Make sure that the mains cable cannot become entangled.
- Do not immerse the device, the mains cable or the mains plug in water or other liquids.
- Do not leave the device unattended while the mains plug is connected to the mains supply.
- Do not use an extension cable.
Battery safety
- Use only the batteries mentioned in the manual.
- Do not use old and new batteries together.
- Do not use batteries of different types or brands.
- Do not install batteries in reverse polarity.
- Do not short-circuit or disassemble the batteries.
- Do not expose the batteries to water.
- Do not expose the batteries to fire or excessive heat.
- Batteries are prone to leakage when fully discharged. To avoid damage to the product, remove the batteries when leaving the product unattended for longer periods of time.
- If liquid from the batteries comes into contact with skin or clothing, immediately rinse with fresh water.
Cleaning and maintenance
- Before cleaning or maintenance, switch off the device, remove the mains plug from the wall socket and wait until the device has cooled down completely.
- Do not use cleaning solvents or abrasives.
- Do not clean the inside of the device.
- Do not attempt to repair the device. If the device does not operate correctly, replace it.
- Clean the device a soft, damp cloth. Thoroughly dry the device with a clean, dry cloth.
Support
If you need further help or have comments or suggestions please visit www.nedis.com/support
Contact
NEDIS B.V., De Tweeling 28, 5215 MC ‘s-Hertogenbosch, The Netherlands
