Netgear CBR40 Orbi Tri-band WiFi Cable Modem Router manual

Netgear CBR40 Orbi Tri-band WiFi Cable Modem Router

Modem Information DOCSIS 3.0 32×8 Dual Band WiFi Modem To achieve Gigablast or Ultimate Classic speeds, a DOCSIS 3.1 modem is required	Highest Service Level Ultimate 500

Front View Click to enlarge.		If the Power LED is not solid blue, check your power adapter connections.
Back View Click to enlarge.		The Netgear CBR40 includes the following connection ports: POWER – Connects the modem to the power adapter RESET – Restores factory settings ETHERNET – Provides internet access to a single device. Only one port is active at a time. CABLE – Connects to coaxial cable

Troubleshooting

The lights indicate the current status of your cable modem. To troubleshoot any connection problems, use the table below.

Modem Light	Status	Problem
Power	Solid White	None. The modem is receiving power and is functioning normally.
	Off	The modem is not receiving power. Verify power supply connections and electrical outlet. Ensure the outlet is not connected to a switch.
	Solid Red	The modem is too warm and could overheat. Power off the modem, let it cool, and move it away from heat sources, such as a TV, DVD player, or speakers.
Internet	Solid Blue	None; the cable modem router is online.
	Blinking Blue	The modem is synchronizing with the cable provider’s Cable Modem Termination System (CMTS).
	Off	Cable modem is offline. Verify all cable connections and try resetting the modem.
Upstream	Solid Amber	One upstream channel is locked.
	Solid Blue	Two or more upstream channels are locked.
	Blinking Blue	The modem is scaning for an upstream channel.
	Off	No upstream channel is locked.
Downstream	Solid Amber	One downstream channel is locked.
	Solid Blue	Two or more downstream channels are locked.
	Blinking Blue	The modem is scanning for a downstream channel.
	Off	No downstream channel is locked.