Rockville RK65BT / RKI65BT Karaoke System Manual

Rockville RK65BT / RKI65BT Karaoke System

Thank you for purchasing this Rockville RKl65BT Karaoke Interface. Please read this guide carefully for proper use of your RKl65BT. Should you need assistance, please call our technical help line at 1-646-758-0144, Monday through Thursday, 9am to 10pm EST., and Fridays, 9am to 3pm EST.

INCLUDES

Mic receiver/mixer
(2) UHF wireless microphones
Power adapter
(1) 3.5mm to 3.5mm AUX cable, 5 ft
(1) 3.5mm to RCA cable, 5 ft
(1) ¼-Ts to WTS cable, 3.2 ft
(1) optical cable, 5 ft
Manual
Warranty card

IMPORTANT SAFETY INSTRUCTIONS

To reduce risk of electric shock, never open the unit. There are no user serviceable parts, refer service to an authorized Rockville service center.
Do not expose this unit water.
Do not install near any heat sources such as radiators, heat registers, stoves, or other devices that produce heat.
Do not defy the safety purpose of the polarized grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or third prong is provided for your safety.
If the provided prong does not fit your outlet, consult an electrician for possible re placement of an obsolete outlet.
Protect the power cord from being walked on or pinched, particularly at plugs, receptacles and/or the point where they exit from the device.
Only use attachments/accessories specified or included with this unit.
Unplug this device during lightning storms or when not in use for prolonged periods.

FUNCTIONS

Antenna
Power LED Indicator
Power button
Echo knob: sets the number of repetitions of the echo effect.
Tone knob: adjusts the high frequency levels.
Mic A RF indicator LED: will light when Mic A is connected.
Mic A knob: sets the volume level for Mic A
Mic B RF indicator LED: will light when Mic B is connected.
Mic B knob: sets the volume level for Mic B.
Music knob: sets the volume level for any audio source connected to any of the inputs on the rear panel.
3.5mm and ¼- outputs: output a mix of the audio source and the mic signal.
Optical input: carries a digital audio stream from components such as TVs, CD players, DVD players, and computers.
Coaxial input
3.5mm AUX input
DC Power in 5V/1A

Windscreen
Battery status indicator
Signal strength
Frequency
Mic channel
Power button/frequency adjustment button
Battery compartment (uses 2x AA alkaline batteries)
Antenna

OPERATION

Connect the receiver to a power outlet and turn it on.
Put two AA alkaline batteries into the battery compartment of the microphone. Please make sure to observe proper polarity.
Power on the microphone(s). In case of any frequency interference, quickly press the power button on the microphone to change the frequency. There are up to 8 frequencies available. Please note that it will take a few seconds for the receiver to automatically sync with the mic whenever the mic frequency is changed.
When first used, the receiver and mics are not matched. The receiver and mics can be used interchangeably, but if more than 1 set of mics and receivers is being used, each set of mics must be specifically matched to the corresponding receiver. Otherwise, you cannot use more than one set in a location.
Please note: If there is no sound input to the mics for more than 5 minutes, they will automatically shut down in order to conserve battery life.

Matching the Receiver and Mics

1. Connect the receiver to a power outlet and turn it off
2. Turn the mic off. Hold the power button until the numbers flash. Press the power button again. The icon should also begin to flash.
3. Quickly turn on the receiver (within 2 seconds). The RF A LED will light. That mic is now matched to channel A. Repeat these steps for the other microphone.
Please note: Even though the mics are matched to a specific channel, you cannot use the same frequency on both mics .

COMPUTER CONNECTION

PLEASE NOTE: Some computers feature Bluetooth connectivity. If your computer is Bluetooth capable, please see the pairing instructions down below.

DVD PLAYER, BLU-RAY PLAYER, TV CONNECTION

PLEASE NOTE: OPTICAL IN port does not support TV PCM Dolby 5.1 output. Some TVs and receivers feature Bluetooth connectivity. If your device is Bluetooth capable, please see the pairing instructions down below.

MOBILE DEVICE CONNECTION

The RKl65BT features mobile device connection via Bluetooth or a 3.5mm AUX input.

BLUETOOTH CONNECTION

Power on the RKl65BT. It will! automatically enter into pairing mode.
Ensure that your device is in Bluetooth mode and discoverable.
Find “RKl65BT” on your device’s list of available Bluetooth connections and select it.
If paring is successful, you will hear audio though the connected speakers.
Playback is controlled by your Bluetooth device.

SPEAKER CONFIGURATIONS

FEATURES

Rockville RKl65BT Dual UHF Wireless Microphone System w/Bluetooth, Karaoke Interface, and Mic Mixer
Connects to any home audio receiver, television, iPad, computers, and more
Bluetooth input
3.5mm aux input
Optical input
Coaxial input
¼” TS mix output passes through the signal of all the mics, as well as any input device
3.5MM aux output passes through the signal of all the mics, as well as any input device
2 UHF wireless microphones with 8 switchable frequencies
Each mic has a nice heavy feel and has a digital display making it easy to switch frequencies
Adjustable echo
Adjustable tone control
Adjustable music input volume
Independently adjustable mic levels
Wireless frequency range:
Mic A: 556.1, 558.4, 560.7, 562.2, 564.5, 566.8, 568.3, 570.6
Mic B: 574.1, 576.4, 578.7, 580.2, 582.5, 584.8, 586.3, 588.6
Number of channels: 8
THO: 0.5%
Signal/Noise ratio: 90dB
Frequency response : 30Hz – 18kHz ±3dB
Operating range: 200 Feet
Transmitting power: 10dBm
Power supply: 3V (2 AA Batteries)
100-240V compatible with included micro USB power cable (5 feet)

TROUBLESHOOTING

No power	Make sure the power is on. Check for loose or disconnected power adapter or cable.
Unit has power, but no sound	Check unit volume settings (Mic A, Mic B, Music) no sound Check source device volume and disable any mute settings. Make sure your speakers are properly connected.
Mics not working	Check the batteries. Make sure the mics are powered on. Make sure the mics are paired. Check the mic frequency,
Bluetooth pairing fails	Check to see that both devices are turned on and fails that your Bluetooth device is discoverable. Turn both devices off and then on again. Make sure that the Bluetooth device is within 5 feet of the unit. Move both devices away from other Bluetooth devices, microwaves, wireless routers, etc. Make sure that all volume controls are set properly.
Sound is poor or distorted	Reduce source volume Change placement angle between mic and speaker. Change distance between mic and speaker.

FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION

Responsible party name: Rockville

Address: 600 Bayview Ave,
Entrance A,
Inwood, NY 11096

Hereby declares that the product RKl65BT dual UHF wireless microphone system w/ mic mixer and karaoke interface complies with FCC rules as mentioned in the following paragraph:

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Visit us at:
RockvilleAudio.com