This Quick Start Manual has been specially designed to guide you through the basic functions and features of your device.

Please read the Quick Start Manual and User Manual carefully to ensure safe and correct use.

Health and safety information

Do not use your camera near flammable or explosive gases and liquids

Do not use your camera near fuels, combustibles, or flammable chemicals. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the camera or its accessories.

Keep your camera away from small children and pets

Keep your camera and all accessories out of the reach of small children and animals. Small parts may cause choking or serious injury if swallowed. Moving parts and accessories may present physical dangers as well.

Prevent damage to subjects’ eyesight

Do not use the flash in close proximity (closer than 1m/3 ft) to people or animals. Using the flash too close to your subject’s eyes can cause temporary or permanent damage.

Handle and dispose of batteries and chargers with care

• Use only Samsung-approved batteries and chargers. Incompatible batteries and chargers can cause serious injuries or damage to your camera.
• Never place batteries or cameras on or in heating devices, such as microwave ovens, stoves, or radiators. Batteries may explode when overheated.

Handle and store your camera carefully and sensibly

• Do not allow your camera to get wet–liquids can cause serious damage. Do not handle your camera with wet hands. Water damage to your camera can void your manufacturer’s warranty.
• Avoid using or storing your camera in dusty, dirty, humid, or poorly ventilated areas to prevent damage to moving parts and internal components.
• Exercise caution when connecting cables or adapters and installing batteries and memory cards. Forcing the connectors, improperly connecting cables, or improperly installing batteries and memory cards can damage ports, connectors, and accessories.
• Do not insert foreign objects into any of your camera’s compartments, slots, or access points. This type of damage may not be covered by your warranty.

Protect batteries, chargers, and memory cards from damage

• Avoid exposing batteries or memory cards to very cold or very hot temperatures (below 0° C/32° F or above 40° C/104° F). Extreme temperatures can reduce the charging capacity of your batteries and can cause memory cards to malfunction.
• Prevent memory cards from making contact with liquids, dirt, or foreign substances. If dirty, wipe the memory card clean with a soft cloth before inserting in your camera.

Camera layout

Setting up your camera

Unpacking

Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment, contact your nearest Samsung dealer or Samsung service center.

Inserting the battery and memory card

Charging the battery

Before using the camera for the first time, you must charge the battery.

Selecting options

1. In Shooting mode, press [MENU].
2. Use the navigation buttons to scroll to an option or menu.
   
3. Press [OK] to confirm the highlighted option or menu.
   • Press [MENU] again to go back to the previous menu.

Capturing photos or videos

Taking a photo

1. Push the Mode switch to ().
   (Press [SMART] to select ().)
2. Align your subject in the frame.
3. Press [Shutter] halfway down to focus automatically.
   A green frame means the subject is in focus.
   
4. Press [Shutter] all the way down to take the photo.

Recording a video

1. Push the Mode switch to ().
   (Press [SMART] to select ().)
2. Align your subject in the frame.
   • Press [Shutter].
3. Press [OK] to pause or resume.
4. Press [Shutter] again to stop the recording.

Note Number of photos by resolution (for 1 GB SD)

These figures are measured under Samsung’s standard conditions and may vary depending on shooting conditions and camera settings.

Playing files

Viewing photos

1. Press [].
2. Press [] or [] to scroll through files.
   • Press and hold to view files quickly.
     

Viewing videos

1. Press [].
2. Press [OK].
   
3. Use the following buttons to control playback.
   

Transferring files to a PC (Windows)

1. Insert the installation CD in a CD-ROM drive and follow the onscreen instructions.
2. Connect the camera to the PC with the USB cable.
   
3. Turn on the camera.
4. On your PC, select My Computer → Removable Disk → DCIM → 100PHOTO.
5. Select the files you want and drag or save them to the PC.

Disconnecting safely (for Windows XP)

Specifications

Please refer to the warranty that came with your product or visit our website http://www.samsungcamera.com/ for after-sales service or inquiries.

SAMSUNG Galaxy Buds

SAMSUNG Galaxy Buds

Play music from your Galaxy Buds+

You can listen to music saved in your mobile device by connecting your earbuds to the mobile device. You can use your connected device or the touchpad on the buds to adjust the volume, control the playback, or change tracks. Here’s simply ways to control your music using your earbuds’ touchpad and don’t forget to launch the Galaxy Wearable app first if you want to use the touchpad controls.

• To play or pause the track: Tap the touchpad to play and pause the track.
• To play the next track: Double tap the touchpad to play the next track during playback.
• To play the previous track: Tap the touchpad three times to play the previous track during playback.
• To adjust the volume during playback: Drag your finger up or down on the touchpad.
  

You can also adjust the volume by tapping and holding the earbud’s touchpad after setting it as a preset tap-and hold feature.

Step 1. Launch the Galaxy Wearable app.
Step 2. Tap on Touchpad.
Step 3. Tap and hold the right earbud’s touchpad and release your finger when you reach the desired volume to increase the volume.

Tap and hold the left earbud’s touchpad and release your finger when you reach the desired volume to decrease the volume.

If the audio quality is not as good on the Galaxy Buds+, find more about how to improve audio quality of the Galaxy Buds.

Note:

• If you select the volume adjustment feature as one side’s preset tap-and hold feature, the other side’s preset tap-and-hold feature is also automatically set to the volume adjustment feature.
• Adjust the volume via your connected mobile device if a sound is low in your earbuds while at full volume.
• If you connect the earbuds to your mobile device while listening to music, the volume may change.
• On iOS devices, you can connect your earbuds to the Galaxy Buds+ app.
• Make sure to keep the device, apps, and the earbuds’ firmware up to date for the best listening experience.
• Listening to music at high volumes may cause hearing damage. If you connect the earbuds to your phone or tablet while listening to music, the volume may change.
• Device screenshots and menu may vary depending on the device model and software version.

Galaxy Buds not working in power saving mode

You may have noticed that when you turn on a power saving mode on your Galaxy S10, the audio from your Galaxy Buds stops. This occurs if the music or audio application being used is set as a “Sleeping app”. Sleeping apps will stop running when the background data is restricted in any power saving mode.

To remove music and audio applications from the list of sleeping apps, please follow the steps below:

1. Open “Settings” and tap “Device care”.
   
2. Select “Battery”.
   
3. Tap the more options icon and select “Settings”.
   
4. Choose “Sleeping apps”.
   
5. Tap the dustbin icon on the top right corner.
   
6. Select the apps you wish to remove from the “Sleeping apps”.
   The apps you remove will be the ones that will continue to work when you activate a power saving modes.
7. Tap “Remove”.
   
   You may also add applications you wish to shut down when you activate a power saving mode by tapping “Add” and choosing the apps you wish to include in the list. Once the desired apps have been selected, tap “Add” to save them to the list.
   

What to do if the Galaxy Buds do not connect properly

In case you experience connection issues with your Galaxy Buds+, please check all of the solutions outlined in detail below to resolve the issue. If the problem persists, you can visit the Samsung Service Center with your device to receive further assistance.

Click to Collapse

• It is recommended to fully charge the battery before using the earbuds for the first time or when they have been unused for extended periods. When you charge the battery for the first time or when the battery is completely discharged, minimum of 30 minutes is required to get it started.
• To charge the earbuds, insert them into the corresponding slots, and then connect the charger.
• The charging case, which has a built-in battery, is charged along with the earbuds that are in the charging case. The charging case may not close properly if you attach the wing tips or ear tips in the wrong direction.
  

Please note: Do not charge the earbuds using a power source such as a computer or notebook. It can cause the earbuds to charge slower.

Click to Collapse

Earbuds can’t be searched on your mobile device:

• Close the charging case again and open it to enter the Bluetooth pairing mode.
• Ensure that your earbuds and the other Bluetooth device are within the Bluetooth connection range (10m or 32ft). The distance may vary depending on the environment the devices are used in.

Earbuds can’t connect to Bluetooth:

• Your Galaxy Buds+ will stop Bluetooth pairing mode after 3 minutes. Insert the Galaxy Buds+ back into the case and open the case again in order to enter the pairing mode.
  
• You can also manually enter the Bluetooth pairing mode using the touchpad by Tap, then Tap & Hold the Galaxy Buds+.
• Make sure the mobile device is within 10m or 32ft of the Galaxy Buds+ when you make the attempt to pair the devices together. The distance may vary depending on the environment the devices are used in.
• Check for any obstacles like walls or electrical equipment between the paired devices. Restart the mobile device and relaunch the Galaxy Wearable app.
• If only a single earbud is connected to your mobile device, restart the earbuds to connect both of them.

Click to Collapse

It is recommended to keep the software installed on your phone, tablet, TV or computer up-to-date. Before you conduct an update for your earbuds, first, update the software on your mobile devices.

Update Galaxy phone or tablet:

Step 1. Go to Settings > Software update.
Step 2. Tap on Download and install.
Step 3. Follow the on-screen instructions.

Once you have updated your mobile device to the latest version, check to see if the app or software you use for the Galaxy Buds+ is also running on current version. In order to update the software of your earbuds, you need to have your mobile device connected to a Wi-Fi or mobile network.

Update the Galaxy Wearable app:

Step 1. Launch the Galaxy Wearable app on your mobile device.
Step 2. Navigate to and tap About Galaxy wearable > tap Update.

Earbuds software update

Update your earbuds’ software via the firmware over-the-air (FOTA) service. Launch the Galaxy Wearable app on the mobile device and tap Earbuds Software update.

Download and install: Check for and install updates manually.
Auto download over Wi-Fi: Set the earbuds to download updates automatically when connected to a Wi-Fi network.
Last update: View the information for the latest software update.

Click to Collapse
If you are still experiencing connection issues even after trying the methods mentioned above, please reset the Galaxy Buds+.

Step 1. To reset and restart the earbuds, insert each earbud into their corresponding slot in the charging case.
Step 2. Remove them from the case after about 7 seconds or more.
Please note: If the charging case has low battery, connect the charging case to the charger first.

How to improve audio quality of the Galaxy Buds

If you have noticed that the sound quality of your Galaxy Buds has deteriorated after using them for a while, the solution may be as simple as just cleaning them. Another reason for poor audio quality can be if the wireless connection is interrupted due to the service provider’s network. Make sure to keep the earphones away from electromagnetic waves. Finally, make sure that your Galaxy Buds and the other Bluetooth device are within the maximum Bluetooth range (10 meters). The distance may vary depending on the environment the devices are in.

FAQs

How long can Galaxy buds last?

Galaxy Buds give you up to 13 hours of play time, with 6 hours of charge in the earbuds, and an additional 7 hours with the charging case. Charging in the case for just 15 minutes will give you up to 1.7 hours of battery life.

Can Galaxy buds get water damage?

The earbuds are not water resistant and are not suitable for use in water. If they get some sweat or rain on them, you should clean them immediately. When drying off the earbuds, remove as much water as possible by patting the earpiece, microphone, touchpad, touch sensor, and charging contacts with a clean, soft cloth.

Can you wear galaxy buds in the shower?

Precautions to care for your Galaxy Buds Pro in good condition. Do not wear the device during activities, such as swimming, playing water sports, taking a shower, or while visiting spa or sauna facilities. Doing so can damage the device.

Can Galaxy buds overcharge?

No, you can not over charge the ear buds

Do Galaxy buds turn off automatically?

Once your wireless headphones galaxy buds will be stored in their charging case, the connexion Bluetooth will be interrupted and they will automatically turn off, while recharging (provided that the charging box itself is sufficiently charged)

What do I do if I lost my Galaxy buds case?

So if you’ve lost or misplaced your galaxy buds case, the only option is to purchase a new set of buds. Samsung might have the option of allowing you to purchase the charging case alone instead of buying the full set of buds.

Do Galaxy buds have touch controls?

To adjust the volume on the Galaxy Buds, Galaxy Buds+, Galaxy Buds Live, or Galaxy Buds Pro, touch and hold the touchpad

Can I track my Samsung earbuds?

You won’t need to buy new Galaxy Buds if you’ve misplaced them because the Galaxy Wearable app makes finding them super easy. On your phone or tablet, navigate to the Galaxy Wearable app. Tap Find My Earbuds, and then tap Start. The earbuds will start beeping, getting gradually louder for a period of 3 minutes

How can I charge my earbuds without a case?

To charge Earbuds with a micro USB, you need to plug a Micro USB cable into your device and either into a computer or a USB adapter. Then you have to sit and wait until your earphones get fully charge

Do Galaxy Buds have mic?

The Galaxy Buds come equipped with an Adaptive Dual Microphone that combines an inner and outer microphone, it captures your voice clearly and accurately. The combination of microphones effectively blocks external noise when you’re outside and makes your calls sound clear in quiet places.

How many devices can Samsung Buds connect to?

two Galaxy devices
Galaxy Buds+ make use of Bluetooth 5.0 to connect to two Galaxy devices at once. This way, you can open the media panel on your Samsung phone or tablet, tap the Galaxy Buds+, and listen to your music.

How do I know when my Bluetooth is fully charged?

When charging, it is usually a red indicator light. When the light is off, it indicates that the battery is fully charged. To achieve the longest battery life of a Bluetooth headset, you must master the correct method of charging the Bluetooth headset, that is, only when the Bluetooth headset battery is low.

CHECKING THE COMPONENTS

• For Soundbar wall mounting components, see page 29.
• See page 31 for instructions on how to use the Holder-Cable.
• To purchase additional components or optional cables, contact a Samsung Service Center or Samsung Customer Care.
• The appearance of the accessories may differ slightly from the illustrations above.

Inserting Batteries before using the Remote Control (AA batteries X 2)

Slide the battery cover in the direction of the arrow until it is completely removed. Insert 2 AA batteries (1.5V) oriented so that their polarity is correct. Slide the battery cover back into position.

PRODUCT OVERVIEW

Front Panel / Right Side Panel of the Soundbar

Bottom Panel of the Soundbar

• When disconnecting the power cable from a wall outlet, pull the plug. Do not pull the cable.
• Do not connect this unit or other components to an AC outlet until all connections between components are complete.

CONNECTING THE SOUNDBAR

Connecting Electrical Power

• For more information about the required electrical power and power consumption, refer to the label attached to the product. (Label : Bottom of the Soundbar Main Unit)

• Connect the supplied power cable to the POWER IN jack.

• The POWER OUT jack is used to provide power to a Samsung TV mounted on the wall using a Wall Mount Kit (WMN300SB – not supplied).
• The POWER OUT jack can connect only to Samsung TVs that use a 2-pin power cord and consume 400 W or less. (Connecting the jack to a device that consumes more than 400 W may damage the Soundbar or cause a malfunction.)

For a list of Samsung TVs that are compatible with the WMN300SB Wall Mount Kit and the POWER OUT jack, see the WMN300SB Wall Mount Kit user manual.
You can view the manual on line at http://www.samsung.com/support)

CONNECTING TO YOUR TV

Hear TV sound from your Soundbar through wired or wireless connections.

• When the Soundbar is connected to a selected Samsung TVs, the Soundbar can be controlled using the TV’s remote control.
• When using optical cable, this feature can be supported by 2017 Samsung Smart TVs that support Bluetooth.
• This function also allows you to use the TV menu to adjust the sound field and various settings as well as the volume and mute.

Method 1. Connecting with a Cable

Connecting using an Optical Cable

1. Connect the DIGITAL AUDIO IN (OPTICAL) jack on the Soundbar to the OPTICAL OUT jack of the TV with a digital optical cable.
2. Press the (Source) button on the right side panel or remote control, and then select the “D.IN” mode.

Auto Power Link

Auto Power Link automatically turns on the Soundbar when the TV is turned on.

1. Connect the Soundbar and a TV with a digital optical cable.
2. Press the (Source) button on the right side panel or on the remote control, and then select “D.IN”.
3. Press the Left button on the remote control for 5 seconds to turn Auto PowerLink on or off.                                                                                          • Auto Power Link is set to ON by default. (To turn off this function, turn off Auto Power using the Soundbar.)                                                                        • Depending on the connected device, Auto Power Link may not function.      • This function is only available in the “D.IN” mode.

Connecting a TV using an HDMI Cable

1. With the Soundbar and TV turned on, connect the HDMI cable (not supplied) as shown in the figure.
2. “TV ARC” appears in the display window of the Soundbar main unit and the Soundbar plays TV sound.
   • If TV sound is inaudible, press the (Source) button on the remote control or on the right side of the Soundbar to switch to “D.IN” mode. The screen displays “D.IN” and “TV ARC” in sequence, and TV sound is played.              • If “TV ARC” does not appear in the display window of the Soundbar main unit, confirm that the cable is connected to the correct port.
   • Use the volume buttons on the TV’s remote control to change the volume of the Soundbar.

NOTES

• HDMI is an interface that enables the digital transmission of video and audio data with just a single connector.
• If the TV provides an ARC port, connect the HDMI cable to the HDMI IN (ARC) port.
• We recommend you use a coreless HDMI cable if possible. If you use a cored HDMI cable, use one whose diameter is less than 0.55 inches.
• Anynet+ must be turned on.
• This function is not available if the HDMI cable does not support ARC.

Method 2. Connecting Wirelessly

Connecting a TV via Bluetooth

When a TV is connected using Bluetooth, you can hear stereo sound without the hassle of cabling.

• Only one TV can be connected at a time.

The initial connection

• Press the (Source) button on the right side panel or on the remote control, and then select “BT”.
• Change “BT” to “BT PAIRING”.
• If “BT READY” appears, press and hold the (Source) button on the right side panel of the Soundbar or on the remote control for more than 5 seconds to display “BT PAIRING”.
• Select Bluetooth mode on the TV. (For more information, see the TV’s manual.)
• Select “[AV] Samsung Soundbar MSxxx” from the list on TV’s screen.
  An available Soundbar is indicated with “Need Pairing” or “Paired” on the TV Bluetooth device list. To connect to the Soundbar, select the message and establish a connection.
• When the TV is connected, [TV Name] → “BT” appears on the Soundbar’s front display.
• You can now hear TV sound from the Soundbar.

If the device fails to connect

• If the previously connected Soundbar listing (e.g. “[AV] Samsung Soundbar MSxxx”) appears in the list, delete it.
• In “BT” mode, press and hold the (Source) button for more than 5 seconds on the right side panel of the Soundbar or on the remote control to switch to “BT PAIRING” mode. Then, select “[AV] Samsung Soundbar MSxxx” from the TV’s search list.

What are the BT READY and BT PAIRING statuses?

• BT READY : In this mode, you can search for previously connected TVs or connect to the Soundbar from a previously connected mobile device.
• BT PAIRING : In this mode, you can connect to a new device. (While in “BT” mode, press and hold the (Source) button for more than 5 seconds on the right side of the Soundbar or on the remote control.)

NOTES

• If asked for a PIN code when connecting a Bluetooth device, enter <0000>.
• In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the Soundbar and the Bluetooth device exceeds 32.8 ft.
• The Soundbar automatically turns off after 5 minutes in the Ready state.
• The Soundbar may not perform Bluetooth search or connection correctly under the following circumstances:
  –– If there is a strong electrical field around the Soundbar.
  –– If several Bluetooth devices are simultaneously paired with the Soundbar.
  –– If the Bluetooth device is turned off, not in place, or malfunctions.
• Electronic devices may cause radio interference. Devices that generate electromagnetic waves must be kept away from the Soundbar main unit – e.g., microwaves, wireless LAN devices, etc.

Disconnecting the Soundbar from the TV

Press the (Source) button on the right side panel or on the remote control and switch to any mode but “BT”.

• Disconnecting takes time because the TV must receive a response from the Soundbar. (The time required may differ, depending on the TV model.)
• To cancel automatic Bluetooth connection between the Soundbar and TV, press the (Play/Pause) button on the remote control for 5 seconds in “BT READY” status. (Toggle On → Off)

Connecting via Wi-Fi

Pre-connection Checklist

• Confirm that your Samsung smart TV was released after 2014. This function is compatible only with Samsung smart TVs released after 2014.
• Make sure your Wireless router (Wi-Fi) is ready and working.
• Make sure that the TV is connected to the Wireless router (your Wi-Fi network).

Step 1 : Connecting the Soundbar to Wi-Fi

• Press the (Source) button on the right side of the Soundbar or on the remote control to select “WIFI” mode.
• When using selected Samsung TV (2016 or 2017 Samsung smart TVs that support Bluetooth.)
  –– If you select “WIFI” mode when the TV is turned on, the TV screen displays a pop-up window providing instructions on how to automatically connect the Soundbar to a wireless router (Wi-Fi). Refer to instructions in the pop-up window of TV.

• Connect your mobile device (smartphone, tablet etc.) to the Wi-Fi network the TV is connected to.
• Install and launch the Samsung Multiroom app on your mobile device (smartphone, tablet etc.).

• Follow the instructions in the app screen on the mobile device to connect the Soundbar to your Wi-Fi network.

Step 2 : Configuring Settings on the TV

• If the TV disconnects from your wireless network after you change the input source to the Soundbar, use the TV menu to connect the TV to the network again.

• The Soundbar outputs TV sound.

NOTES

• The TV and Soundbar must be connected to the same wireless network (Wi-Fi).
• If your wireless router (Wi-Fi) uses a DFS channel, you will not be able to establish a Wi-Fi connection between the TV and Soundbar. Contact your Internet service provider for details.
• If the 5GHz Wi-Fi connection is not smooth, use the 2.4GHz bandwidth

CONNECTING AN EXTERNAL DEVICE

Connect to an external device via a wired or wireless network to play the external device’s sound through the Soundbar.

Connecting using an Optical or Analog Audio (AUX) Cable

Optical Cable

Connecting using an HDMI Cable

1. Connect an HDMI cable (not supplied) from the HDMI IN jack on the back of the product to the HDMI OUT jack on your digital device.
2. Connect an HDMI cable (not supplied) from the HDMI OUT (TV-ARC) jack on the back of the product to the HDMI IN jack on your TV.
3. Press the (Source) button on the right side panel or on the remote control, and then select “HDMI”.
4. “HDMI” mode is displayed on the Soundbar display panel and sound plays.

Samsung 4G LTE Network Extender 2

Verizon Wireless 4G LTE Network Extender

Thank you for purchasing a Network Extender to provide enhanced coverage for your Verizon Wireless mobile devices. Use this guide to help you set up your Network Extender, learn how to connect to it, and verify that you are under Network Extender coverage.

Get to Know Your Device

In the box

Setting Up Your Network Extender

1. Review these 4G LTE Network Extender Requirements

• Internet Access: High speed wired broadband with minimum download speed of 10 Mbps and upload speed of 5 Mbps, 20 Mbps down and 10 Mbps up or higher is recommended.
  NOTE: Home satellite broadband access is not supported.
• A Router/Modem: The Network Extender must be connected to an available LAN port on a router or modem with always-on internet access.
• GPS signal: The Network Extender requires a continuous GPS signal from the provided GPS antenna.

2. Position Your Network Extender
Consider these factors when choosing a location for your Network Extender:

• For best results, place your Network Extender near a window where a strong GPS signal can be acquired. You can use the enclosed extension cable, if needed, to position the antenna near a window. See the Troubleshooting section of this guide for instructions.
  NOTE: A GPS signal is necessary for the Network Extender to work properly and to provide your location if you dial 911 in an emergency.
• Place your Network Extender at least 10 feet away from products that generate electromagnetic radiation (e.g., a microwave oven).
• Your Network Extender needs to be plugged into a wall outlet.
• The 4G LTE Network Extender can be placed on a flat surface, such as a table or shelf, or mounted to the wall or ceiling.
  NOTE: Optional wall mount and ceiling mount brackets sold separately on verizonwireless.com.

3. Connect Your 4G LTE Network Extender

1. Plug one end of the provided Ethernet cable into an available LAN port on your router and the other end to the LAN port on your Network Extender.
2. Plug the power supply connector into the 12V DC power port located at the rear of the Network Extender.
3. Insert one end of the power cord into the power supply and then plug the other end into an available outlet.

4. The Network Extender will turn on automatically. When it does, startup and self-configuration will begin. This will typically take 30 – 60 minutes depending on GPS signal conditions. During that time, the Power/Status indicator will blink blue.

NOTE: If an error message appears on the LCD display, or if Startup takes longer than an hour, please refer to the Startup Troubleshooting table in this guide.

After successful startup, the indicator will return to solid blue and the display will show “In Service”. Press the display button to see additional information about your Network Extender.

Making Calls Using Your 4G LTE Network Extender

Once the Network Extender is in service, your phone must be within 50 feet, horizontally, of the unit.

To verify your Verizon Wireless phone is connected to the Network Extender:

1. Make sure your phone has Advanced Calling or HD Voice activated.
2. Dial #48 from your mobile phone and listen for the following confirmation: “You are under 4G LTE Network Extender coverage …”
3. Some phones may show a home icon  .

NOTE: The range of the Network Extender is dependent on the strength of the existing Verizon Wireless network coverage. The use of this unit is recommended for areas where 1 bar or less is observed on your phone.

Startup Sequence with Troubleshooting Tips

NOTE: For more information on all display messages during startup, please refer to the Troubleshooting section of the User Guide.

Other Messages and Troubleshooting Tips

GPS Troubleshooting

If your display still shows “Searching for GPS” after one hour, or you get a GPS error message

• Make sure that your Network Extender is at least 10 feet away from any communication devices or appliances that generate electromagnetic radiation (e.g., Wi-Fi routers or microwave ovens).
• If you have another Network Extender, make sure their GPS antennas are at least 150mm apart.
• Make sure your Network Extender is close to a window. If necessary, use the included 23’ GPS extension cable to position the GPS antenna as close to a window as possible. Follow the steps below to attach the GPS extension cable:
  a. Firmly slide the GPS antenna cover off, as shown, to expose the rectangular GPS antenna.
  b. Disconnect the GPS antenna. Connect one end of the extension cable to the antenna and connect the other end to the Network Extender where the antenna was originally connected.
  c. Replace the cover, being careful to position the cable through the notch provided. Then extend the cable, with the antenna on the end and place the antenna close to a window.

NOTE: If it has taken more than two hours to acquire a GPS signal, please check the GPS signal strength on the Admin website. If the signal is weak, please see the user guide for additional troubleshooting steps.

If your display still shows ‘Connecting to the Verizon Network’ after one hour

You may have to change the settings on your router. Please refer to the Troubleshooting section of the User Guide before calling Verizon customer support.

You can download the user guide from verizonwireless.com.

For more information, go to verizonwireless.com/support/network-extender-router-configuration/.

To contact Verizon Customer Service, call 800-922-0204.

Network Extender Coverage and Capacity

Once your Network Extender is successfully set up, the coverage and capacity will be as follows:

• Coverage: Approximately 7,500 square feet (about a 50-foot radius)*
• Capacity: Up to fourteen active users + one channel reserved for E911 calls

* Coverage radius may vary based on the floor plan and RF absorption of the materials in the building.

Accessing Your Network Extender’s Admin Website

You can manage your Network Extender’s settings from its Admin website:

1. Open a web browser, using a computer connected to the same network (LAN) as the Network Extender.
2. Enter “http://” followed by the Network Extender’s IP address (e.g., http://192.168.0.10).
   NOTE: You will find the Network Extender’s IP address on the display. Use the Display button to navigate to it.
3. Sign in using the default admin password: LTEFemto + last 4 digits of the MAC ID (e.g., LTEFemto00A3).

NOTE: The password is case sensitive. Letters in the last four digits of the MAC ID should be UPPER case. The MAC ID can be found on the label on the bottom of the Network Extender.

About your phone

NOTE: Devices and software are constantly evolving—the screen images and icons you see here are for reference only.

Setting up your phone

Your phone already has a SIM card installed.

Optional: Insert the microSD card

1. With the screen facing up, insert the tool that came with your phone into the hole on the SIM/microSD™ card tray to open it.
2. Carefully slide out the tray.
3. Insert the microSD card into the tray with the gold contacts facing down (as shown).
4. Carefully slide the tray back into place.

NOTE: MicroSD card sold separately.

Charge the Phone

Before turning on your phone, charge it fully.

Your phone comes with an Adaptive Fast Charging charger and a USB cable. Plug the smaller end of the cable into the USB/charger port on your phone and the larger end into the charger. Then plug the charger into an electrical outlet.

CAUTION: Use only charging devices that are approved by Samsung. Samsung accessories are designed for your device to maximize battery life. Using other accessories may void your warranty and may cause damage.

Using your phone

Turning your phone on/off
To turn your phone on, press and hold the

Power/Lock button.
To turn your phone off, press and hold the Power/Lock button and follow the prompts.

Locking/Unlocking the screen
To turn on your screen, press the Power/Lock button and then swipe on the screen to unlock it.

To turn off your screen and prevent accidental key presses, press the Power/Lock button.

For added security, choose one of these other locking features:

• Intelligent Scan: Use both your face and irises to unlock your phone.
• Fingerprint Scanner: Use your fingerprint to unlock your phone.
• Face Lock: Have your phone unlock when it recognizes your face.
• Iris Scanner: Use your eyes to unlock your phone.

From the Home screen, swipe up for Apps and then tap Settings > Lock screen and security and choose your screen lock type. Then follow the onscreen instructions.

NOTE: The Iris Scanner is not intended to be used as a medical device and the biometric data collected and stored locally by the mechanism is not intended to be used for any diagnostic, therapeutic, or preventative purposes. Please follow all instructions for use of this feature. For more information, refer to the online support content or visit: Samsung.com/US/IrisScanner.

Home screen mode

You can select one of the two modes: Easy or Standard. Instructions in this guide are written using Standard mode.

Standard mode is for users who are familiar with Android™.

Easy mode is a simplified experience for the first-time smartphone user.

1. From the Home screen, swipe up for Apps and then tap Settings > Display > Easy mode.
2. Choose the mode you want to use and tap APPLY.

Edge screens

Edge screens deliver always-on access to text, email, notifications, news, and more.

To choose which Edge screen you want to use and customize the information it displays:

From the Home screen, swipe up for Apps and then tap Settings > Display > Edge screen.

Hello Bixby

To launch Hello Bixby, press the Bixby button.

Hello Bixby allows you to quickly set reminders, create voice dictation, search and access content on your phone and on the Internet.

Apps

Find new apps to download and install on your device.

Play Store: Download new apps from the Google Play store.
Visit Play.Google.com/Store/Apps to learn more.

Galaxy Apps: view and download Samsung apps that are optimized for use with Galaxy devices. Visit samsung.com/us/support/owners/app/galaxy-apps to learn more.

Copying content from your old phone
For help transferring contacts, photos, and other content from your old phone,                             visit verizonwireless.com/Cloud.

Or, transfer content using Smart Switch and the USB connector that came with your phone.

From the Home screen, swipe up for Apps and then tap Settings > Accounts > Smart Switch.

Learning more

Managing your account

Additional information

Your wireless device and third-party services
Verizon Wireless is the mobile carrier associated with this wireless device, but many services and features offered through this device are provided by or in conjunction with third parties. Verizon Wireless is not responsible for your use of this device or any non-Verizon Wireless applications,
services and products, including any personal information you choose to use, submit or share with others. Specific third-party terms and conditions, terms of use and privacy policies apply. Please review carefully all applicable terms, conditions and policies prior to using this wireless device and any associated application, product or service.

Hearing aid compatibility information
This phone has been tested and rated for use with hearing aids for some of the wireless technologies that it uses. However, there may be some newer technologies that
have not been tested yet for use with hearing aids. It is important to try the different features of this phone thoroughly and in different locations, using your hearing aid or cochlear implant, to determine if you hear any interfering noise. Ask your service provider or the manufacturer of this phone for information on hearing aid compatibility. If you have questions about return or exchange policies, ask your service provider or phone retailer.

Samsung and Galaxy S9 and Galaxy S9+ are trademarks of Samsung Electronics Co., Ltd. Android, Google, the Google logo and Google Play are trademarks of Google LLC. Screen images simulated. Appearance of device may vary.

© 2018 Verizon Wireless. All Rights Reserved.

USER MANUAL SAMSUNG UHD TV SERIES 8 TU8000

Thank you for purchasing this Samsung product.
To receive more complete service, please register your product at www.samsung.com

Before Reading This User Manual

This TV comes with this user manual and an embedded e-Manual.
Before reading this user manual, review the following:

	User Manual	Read this provided user manual to see information about product safety, installation, accessories, initial configuration, and product specifications.
	e-Manual	For more information about this TV, read the e-Manual embedded in the product. • To open the e-Manual, > Settings > Support > Open e-Manual

On the website, you can download the user manual and see its contents on your PC or mobile device.
Learning the e-Manual’s assistance functions
• Some menu screens cannot be accessed from the e-Manual.

	Search	Select an item from the search results to load the corresponding page.
	Index	Select a keyword to navigate to the relevant page. – The menus may not appear depending on the geographical area.
	Recent pages	Select a topic from the list of recently viewed topics.

Learning the functions of the buttons that appear on e-Manual topic pages

	Try Now	Access the associated menu item and try out the feature directly.
	Link	Access an underlined topic referred to on an e-Manual page immediately.

Warning! Important Safety Instructions

Please read the Safety Instructions before using your TV.

CAUTION			Class II product: This symbol indicates that a safety connection to electrical earth (ground) is not required.
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER-SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.			AC voltage: Rated voltage marked with this symbol is AC voltage.
	This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.		DC voltage: Rated voltage marked with this symbol is DC voltage.
	This symbol indicates that this product has included important literature concerning operation and maintenance.		C Caution. Consult instructions for use: This symbol instructs the user to consult the user manual for further safety-related information.

• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure the reliable operation of this apparatus and to protect it from overheating, these slots and openings must never be blocked or covered.
  – Do not place this apparatus in a confined space, such as a bookcase or built-in cabinet, unless proper ventilation is provided.
  – Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight.
  – Do not place vessels (vases etc.) containing water on this apparatus, as this can result in a fire or electric shock.
• Do not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc.). If this apparatus accidentally gets wet, unplug it and contact an authorized dealer immediately.
• This apparatus uses batteries. In your community, there might be environmental regulations that require you to dispose of these batteries properly. Please contact your local authorities for disposal or recycling information.
• Do not overload wall outlets, extension cords, or adaptors beyond their capacity, since this can result in fire or electric shock.
• Power-supply cords should be placed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to cords at the plug end, at wall outlets, and at the point where they exit from the appliance.
• To protect this apparatus from a lightning storm, or when left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power-line surges.
• Before connecting the AC power cord to the DC adaptor outlet, make sure that the voltage designation of the DC adaptor corresponds to the local electrical supply.
• Never insert anything metallic into the open parts of this apparatus. This may cause a danger of electric shock.
• To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus.
• Be sure to plug in the power cord until it is firmly seated. When unplugging the power cord from a wall outlet, always pull on the power cord’s plug. Never unplug it by pulling on the power cord. Do not touch the power cord with wet hands.
• If this apparatus does not operate normally – in particular, if there are any unusual sounds or smells coming from it – unplug it immediately and contact an authorized dealer or service center.
•  Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of time (especially when children, elderly, or disabled people will be left alone in the house).
  – Accumulated dust can cause an electric shock, an electric leakage, or a fire by causing the power cord to generate sparks and heat or by causing the insulation to deteriorate.
• Be sure to contact an authorized Samsung service center for information if you intend to install your TV in a location with heavy dust, high or low temperatures, high humidity, chemical substances, or where it will operate 24 hours a day such as in an airport, a train station, etc. Failure to do so may lead to serious damage to your TV.
• Use only a properly grounded plug and wall outlet.
  – An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)
• To turn off this apparatus completely, disconnect it from the wall outlet. To ensure you can unplug this apparatus quickly if necessary, make sure that the wall outlet and power plug are readily accessible.
• Store the accessories (batteries, etc.) in a location safely out of the reach of children.
• Do not drop or strike the product. If the product is damaged, disconnect the power cord and contact a Samsung service center.
• To clean this apparatus, unplug the power cord from the wall outlet and wipe the product with a soft, dry cloth. Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, aerial fresheners, lubricants, or detergents. These chemicals can damage the appearance of the TV or erase the printing on the product.
•  Do not expose this apparatus to dripping or splashing.
• Do not dispose of batteries in a fire.
• Do not short-circuit, disassemble, or overheat the batteries.
• There is a danger of an explosion if you replace the batteries used in the remote with the wrong type of battery. Replace only with the same or equivalent type.
  * Figures and illustrations in this User Manual are provided for reference only and may differ from the actual product appearance. Product design and specifications may change without notice.

What’s in the Box?

Make sure the following items are included with your TV. If any items are missing, contact your dealer.

• Samsung Smart Remote & Batteries (AA x 2)
• User Manual
• TV Power Cable
  
  COMPONENT IN / AV IN Adapter (Not available in some locations)
• Warranty Card / Regulatory Guide (Not available in some locations)

Wall Mount Adapter

• The items’ colours and shapes may vary depending on the models.
•  Cables not included can be purchased separately.
•  Check for any accessories hidden behind or in the packing materials when opening the box.

Warning: Screens can be damaged from direct pressure when handled incorrectly. We recommend lifting the TV at the edges, as shown.

TV Installation

Mounting the TV on a wall

If you mount this TV on a wall, follow the instructions exactly as set out by the manufacturer. Unless it is correctly mounted, the TV may slide or fall and cause serious injury to a child or adult and serious damage to the TV.
For models providing wall mount adapters, install them as shown in the figure below before installing the wall mount kit.

• Refer to the installation manual included with the Samsung wall mount kit.

• Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you choose to install the wall mount on your own.
• You can install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to surfaces other than plaster board, contact your nearest dealer for additional information. If you install the TV on a ceiling or slanted wall, it may fall and result in severe personal injury.
• Standard dimensions for wall mount kits are shown in the table on the next page.
• If you are installing a third-party wall mount, note that the length of the screws you can use to attach the TV to the wall mount is shown in column C in the table on the next page.
• When installing a wall mount kit, we recommend you fasten all four VESA screws.
• If you want to install a wall mount kit that attaches to the wall using two top screws only, be sure to use a Samsung wall mount kit that supports this type of installation. (You may not be able to purchase this type of wall mount kit, depending on the geographical region.)

TV size in inches	VESA screw hole specs (A * B) in millimeters	Standard Screw	Standard Screw	Quantity
55	200 x 200	M8	M8	4
65	400 x 400

Do not install your wall mount kit while your TV is turned on. This may result in personal injury from electric shock.

• Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw specifications. Screws that are too long may cause damage to the inside of the TV set.
• For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ depending on the wall mount specifications.
• Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents.
• Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or when the consumer fails to follow the product installation instructions.
•  Do not mount the TV at more than a 15-degree tilt.
• Always have two people mount the TV onto a wall.

Providing proper ventilation for your TV

When you install your TV, maintain a distance of at least 10 cm between the TV and other objects (walls, cabinet sides, etc.) to ensure proper ventilation. Failing to maintain proper ventilation may result in a fire or a problem with the product caused by an increase in its internal temperature.
When you install your TV with a stand or a wall mount, we strongly recommend you use parts provided by Samsung Electronics only. Using parts provided by another manufacturer may cause difficulties with the product or result in injury caused by the product falling.

Installation with a stand	Installation with a wall mount

Attaching the TV to the Stand

Make sure you have all the accessories shown, and that you assemble the stand following the provided assembly instructions.

Safety Precaution: Securing the TV to the wall to prevent falling

Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do not hang on or destabilise the TV. This action may cause the TV to tip over, causing serious injuries or death. Follow all safety precautions provided in the Safety Flyer included with your TV. For added stability and safety, you can purchase and install the anti-fall device as described on the next page.

WARNING: Never place a television set in an unstable location. The television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as

• Using cabinets or stands recommended by the manufacturer of the television set.
• Only using furniture that can safely support the television set.
• Ensuring the television set is not overhanging the edge of the supporting furniture.
• Not placing the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support.
• Not placing the television set on cloth or other materials that may be located between the television set and supporting furniture.
• Educating children about the dangers of climbing on furniture to reach the television set or its controls.

If you are retaining and relocating the television set that you are replacing with this new set, you should apply the same precautions to the old set.

Preventing the TV from falling

1. Using the appropriate screws, firmly fasten a set of brackets to the wall. Confirm that the screws are firmly attached to the wall.
   – You may need additional material such as wall anchors depending on the type of wall.
2. Using the appropriately sized screws, firmly fasten a set of brackets to the TV.
   – For the screw specifications, refer to the standard screw part in the table under “Mounting the TV on a wall”.
   
3. Connect the brackets fixed to the TV and the brackets fixed to the wall with a durable, heavy-duty string, and then tie the string tightly.
   – Install the TV near the wall so that it does not fall backward.
   – Connect the string so that the brackets fixed to the wall are at the same height as or lower than the brackets fixed to the TV.
   

The Samsung Smart Remote

About the Buttons on the Samsung Smart Remote

• The images, buttons, and functions of the Samsung Smart Remote may differ depending on the model.

Pairing the TV to the Samsung Smart Remote

When you turn on the TV for the first time, the Samsung Smart Remote pairs to the TV automatically. If the Samsung Smart Remote does not pair to the TV automatically, point it at the remote control sensor of the TV, and then press and hold the buttons labelled and as shown in the figure on the left simultaneously for 3 seconds or more.

Installing batteries into the Samsung Smart Remote

To install the batteries, push the rear cover open in the direction of the arrow, and then insert the batteries as shown in the figure. Make sure that the positive and negative ends are facing in the correct direction.

• Alkaline batteries are recommended for longer battery life.

Running the Initial Setup

When you turn on your TV for the first time, it immediately starts the Initial Setup. The Initial Setup allows you to configure the basic settings for the TV to operate, such as broadcast reception, channel search, and network connection, at one time.

• Before starting the Initial Setup, be sure to connect external devices first.
• To use the TV’s smart features, the TV must be connected to the Internet.
• Noise may occur temporarily when the TV communicates with mobile devices.
• The SmartThings app is available on mobile devices for Android 6.0 or higher and iOS 10 or higher.
• To perform initialization by using the SmartThings app, the mobile device must have been connected via Wi-Fi.
• When the pop-up for setup does not appear automatically on the SmartThings app of your mobile device, proceed with the process after manually adding the TV using Add Device on the dashboard of the SmartThings app.
  You can also start the Initial Setup using the TV’s menu ( > Settings > General > Start Setup).
  Follow the instructions displayed on the Initial Setup screen and configure the TV’s basic settings to suit your viewing environment.

Using the TV Controller

You can turn on the TV with the TV Controller button at the bottom of the TV, and then use the Control Menu.
The Control menu appears when the TV Controller is pressed while the TV is On. For more information about its usage, refer to the figure below.

Connecting to a Network

Connecting the TV to a network gives you access to online services, such as Smart Hub, as well as software updates.

Network Connection – Wireless

Connect the TV to the Internet using a standard router or modem.

Network Connection – Wired

Connect your TV to your network using a LAN cable.

• The TV does not support network speeds less than or equal to 10 Mbps.
• Use Cat7 (*STP Type) cable for the connection.
  * Shielded Twist Pair

Mobile Network

Depending on the model or geographical area.
While connecting to the mobile network, some functions might be unavailable.
Refer to the following diagram and insert the Mobile Dongle into the USB port. The Mobile Dongle must be connected to the TV in order to connect to the mobile network. However, the Mobile Dongle is sold separately and is not available from Samsung.
If you have any problems using online services, please contact your Internet service provider.

• When you use a large mobile dongle(Data Card), USB devices may not work properly due to interferences among the USB ports, or the wireless network may not work properly due to interferences from the peripherals and surroundings. In this case, use a USB extension cable.

Supported Telecom and Model Name
For more information, refer to the e-Manual.

Troubleshooting and Maintenance

Troubleshooting

If the TV seems to have a problem, first review this list of possible problems and solutions. Alternatively, review the Troubleshooting Section in the e-Manual. If none of these troubleshooting tips apply, please visit “www.samsung.com” and click on Support, or contact the call centre listed on the back cover of this manual.

• This TFT LED panel is made up of sub pixels which require sophisticated technology to produce. There may be, however, a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
• To keep your TV in optimum condition, upgrade to the latest software. Use the Update Now or Auto-update
  functions on the TV’s menu (> Settings > Support > Software Update > Update Now or Auto update).

The TV won’t turn on.

• Make sure that the AC power cord is securely plugged in to the TV and the wall outlet.
• Make sure that the wall outlet is working and the power indicator at the bottom of the TV is lit and glowing a solid red.
• Try pressing the Power ( ) button on the TV to make sure that the problem is not with the remote control.
  If the TV turns on, refer to “Remote control does not work” below.

There is no picture/video/sound, or a distorted picture/video/sound from an external device, or “Weak or No Signal” is displayed on the TV, or you cannot find a channel.

• Make sure the connection to the device is correct and that all cables are fully inserted.
• Remove and reconnect all cables connected to the TV and the external devices. Try new cables if possible.
• Confirm that the correct input source has been selected ( > Source).
•  Perform a TV self-diagnosis to determine if the problem is caused by the TV or the device ( > Settings > Support > Self Diagnosis > Start Picture Test or Start Sound Test).
• If the test results are normal, reboot the connected devices by unplugging each device’s power cord and then plugging it in again. If the issue persists, refer to the connection guide in the user manual of the connected device.
• If you are not using a cable box or satellite box, and your TV is receiving TV signals from an antenna or a cable wall connector, run Auto Tuning to search for channels ( > Settings > Broadcasting > (Auto Tuning Settings) > Auto Tuning).
  – The Auto Tuning Settings may not appear depending on the model or geographical area.
  – If you are using a cable box or satellite box, please refer to the cable box or satellite box manual.

The remote control does not work.

• Check if the power indicator at the bottom of the TV blinks when you press the remote’s Power button. If it does not, replace the remote control’s batteries.
• Make sure that the batteries are installed with their poles (+/–) in the correct direction.
• Try pointing the remote directly at the TV from 1.5 ~ 1.8 m away.
• If your TV came with a Samsung Smart Remote (Bluetooth Remote), make sure to pair the remote to the TV.

The cable box or satellite box remote control doesn’t turn the TV on or off or adjust the volume.

• Programme the cable box or satellite box remote control to operate the TV. Refer to the cable box or satellite box user manual for the SAMSUNG TV code.

The TV settings are lost after 5 minutes.

• The TV is in the Retail Mode. Change the Usage Mode in the General Menu to Home Mode (  > Settings > General > System Manager > Usage Mode > Home Mode).

Intermittent Wi-Fi

• Make sure the TV has a network connection ( > Settings > General > Network > Network Status).
• Make sure the Wi-Fi password is entered correctly.
• Check the distance between the TV and the Modem/Router. The distance should not exceed 15.2 m.
• Reduce interference by not using or turning off wireless devices. Also, verify that there are no obstacles between the TV and the Modem/Router. (The Wi-Fi strength can be decreased by appliances, cordless phones, stone walls/fireplaces, etc.)

• Contact your Internet Service Provider (ISP) and ask them to reset your network circuit to re-register the Mac addresses of your new Modem/Router and the TV.

Video App problems (Youtube etc)

• Change the DNS to 8.8.8.8. Select > Settings > General > Network > Network Status > IP Settings > DNS setting > Enter manually > DNS Server > enter 8.8.8.8 > OK.
•  Reset by selecting> Settings > Support > Self Diagnosis > Reset Smart Hub.

What is Remote Support?
Samsung Remote Support service offers you one-on-one support with a Samsung Technician who can remotely:

• Diagnose your TV
•  Adjust the TV settings for you
•  Perform a factory reset on your TV
• Install recommended firmware updates

How does Remote Support work?
You can easily get Samsung Remote Support service for your TV:

1. Call the Samsung Contact Centre and ask for remote support.
2. Open the menu on your TV and go to the Support section. ( > Settings > Support)
3.  Select Remote Management, then read and agree to the service agreements. When the PIN screen appears, provide the PIN number to the technician.
4. The technician will then access your TV.

Eco Sensor and screen brightness

Eco Sensor adjusts the brightness of the TV automatically. This feature measures the light in your room and optimizes the brightness of the TV automatically to reduce power consumption. If you want to turn this off, go to > Settings > General > Eco Solution > Ambient Light Detection.

• If the screen is too dark while you are watching TV in a dark environment, it may be due to the Ambient Light Detection function.
•  The eco sensor is located at the bottom of the TV. Do not block the sensor with any object. This can decrease picture brightness.

Caring for the TV

•  If a sticker was attached to the TV screen, some debris can remain after you remove the sticker. Please clean the debris off before watching TV.
• The exterior and screen of the TV can get scratched during cleaning. Be sure to wipe the exterior and screen carefully using a soft cloth to prevent scratches.
• Do not spray water or any liquid directly onto the TV. Any liquid that goes into the product may cause a failure, fire, or electric shock.
• To clean the screen, turn off the TV, then gently wipe away smudges and fingerprints on the panel with a micro-fiber cloth. Clean the body or panel of the TV with a micro-fiber cloth dampened with a small amount of water. After that, remove the moisture with a dry cloth. While cleaning, do not apply strong
  force to the surface of the panel because it can damage the panel. Never use flammable liquids (benzene, thinner, etc.) or a cleaning agent. For stubborn smudges, spray a small amount of screen cleaner on a micro-fiber cloth, and then use the cloth to wipe away the smudges.

Specifications and Other Information

Specifications

Environmental Considerations

• The design and specifications are subject to change without prior notice.
•  For information about the power supply, and more information about power consumption, refer to the label rating attached to the product.
• You can see the label rating attached to the back of the TV. (For some models, you can see the label rating inside the cover terminal.)

Decreasing power consumption

When you shut the TV off, it enters Standby mode. In Standby mode, it continues to draw a small amount of power. To decrease power consumption, unplug the power cord when you don’t intend to use the TV for a long time.

Licences

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

For India only
This product is RoHS compliant.
This marking on the product, accessories or literature indicates that the product and its electronic accessories should not be disposed of with other household waste at the end of their working life.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.
For more information on safe disposal and recycling visit our website www.samsung.com/in or contact our Helpline numbers-1800 40 SAMSUNG(1800 40 7267864) (Toll-Free)
WARNING – TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER ITEMS WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.

This page is intentionally left blank.

Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

Country	Customer Care Centre	Web Site
SINGAPORE	1800 726786411800-SAMSUNG	www.samsung.com/sg/support
AUSTRALIA	1300362603	www.samsung.com/au/support
NEW ZEALAND	800726786	www.samsung.com/nz/support
VIETNAM	1800588889	www.samsung.com/vn/support
THAILAND	0-2689-3232 1800-29-3232 (Toll-free)	www.samsung.com/th/support
MYANMAR	+95-1-2399-888	www.samsung.com/mm/support
CAMBODIA	+855-23-993232 1800-20-3232 (Toll free)	www.samsung.com/th/support
LAOS	+856-21417333
MALAYSIA	1800-88-9999 +603-7713 7420 (Overseas contact)	www.samsung.com/my/support
INDONESIA	021-5699-7777 0800-112-8888 (All Product, Toll-Free)	www.samsung.com/id/support
PHILIPPINES	1-800-10-726-7864 [ PLDT Toll Free ] 1-800-8-726-7864[ Globe Landline and Mobile] 02- 422-2111 [ Standard Landline ]	www.samsung.com/ph/support
TAIWAN	0800-32-9999	www.samsung.com/tw/support
JAPAN	0120-363-905	www.galaxymobile.jp/jp/support
INDIA	1800 40 SAMSUNG (1800 40 7267864) (Toll-Free)	www.samsung.com/in/support
NEPAL	16600172667 (Toll-Free for NTC Only) 9801572667	www.samsung.com/in/support
BANGLADESH	09612300300 08000300300 (Toll-free)	www.samsung.com/in/support
SRI LANKA	+94115AMSUNG (+94117267864) +94117540540 +94115900000	www.samsung.com/in/support

Country	Customer Care Centre	Web Site
SOUTH AFRICA	0860 SAMSUNG (726 7864)
NAMIBIA	08197267864
ZAMBIA	3434
MAURITIUS	800 2550
REUNION	0262 50 88 80
ANGOLA	917 267 864
ZIMBABWE	0808 0204
MOZAMBIQUE	847267864
NIGERIA	0800-726-7864	www.samsung.com/africa_en/support
GHANA	0800-100-077
COTE D’ IVOIRE	8000-00-77	www.samsung.com/africa_fr/support
SENEGAL	800-00-0077
CAMEROON	67095-0077
KENYA	0800 545 545	www.samsung.com/support
UGANDA	0800 300 300
TANZANIA	0800 780 089
RWANDA	9999
BURUNDI	200
DRC	499999
SUDAN	1969

© 2018 Samsung Electronics Co., Ltd. All rights reserved.

BN68-08930A-01

Samsung Galaxy Buds Live R180

Device Layout

Set up Your Device

Learn more about your device hardware, assembling and charging, and how to get started using your new device.

Charge the Battery

Your device case is also the charger.

1. Place the earbuds into the charging case. For best results, do not insert earbuds in the charging case if they are wet or dirty.
2. Close the charging case, and either connect the USB cable as shown, or place the charging case on a wireless charger. The earbuds and charging case are charged simultaneously.

CAUTION: The charging head for plugging the USB cable into a wall outlet is not included. Use only Samsung charging devices rated with an output voltage of 5v and an output current of over 150mA (sold separately). Samsung accessories are designed for your device to maximize battery life. Using other accessories may cause damage, and damage may not be covered by warranty.

While charging, the device and the charger may become hot. This does not affect the device’s lifespan or performance and is in the device’s normal range of operation.
Remove the device from the charger and wait for the device to cool down. For more information, visit https://www.samsung.com/us/support/answer/ANS00076952.

NOTE: Do not disassemble, modify, or repair your device. Placing objects, such as magnetic stripe cards, including credit cards, phone cards, passbooks, and boarding passes, next to the device or charger may cause damage from the charger or device’s magnetic field.

Check the Charge Status

When you connect the earbuds and the charger case the LED indicators flash certain colors to indicate the battery level.

• Green: Fully charged or above 60% battery.
• Yellow: Between 30 and 60% battery.
• Red: Charging or below 30% battery.
• Flashing Red: Charging error. Reconnect the case and earbuds. If the error occurs again, contact a Samsung Service Center for service support.

NOTE: You can check the battery level for the case and earbuds in the Galaxy Wearable app. For more information, see Battery level.

Wireless PowerShare

Wirelessly charge your device using a supported Samsung smartphone. Some features are not available while sharing power.

1. From the smartphone, open the Notification panel and, tap Wireless PowerShare to enable this feature.
2. With the smartphone face down, place the device on the back of the smartphone to charge. A notification sound or vibration occurs when charging begins.
   NOTE: Wireless PowerShare works with most Qi-Certified devices. Requires minimum 30% battery to share. Speed and power efficiency of charge varies by device. May not work with some accessories, covers, or other manufacturer’s devices. If you have trouble connecting or charging is slow, remove any cover from each device. May affect call reception or data services, depending on your network environment.

For best results when using Wireless PowerShare, please note:

• Remove any accessories or cover before using the feature. Depending on the type of accessory or cover, Wireless PowerShare may not work properly.
• The location of the wireless charging coil may vary by device, so you may need to adjust the placement to make a connection. When charging starts, a notification or vibration will occur, so the notification will help you know you’ve made a connection. During charging, do not move or use either device.
• Call reception or data services may be affected, depending on your network environment.
• Charging speed or efficiency can vary depending on device condition or surrounding environment.
• Do not use headphones.

Attach the Wing Tip

Before wearing the earbuds, be sure to attach the wing tips. Wearing the earbuds without wing tips may hurt your ears.

1. Select the wing tip size that best fits your ear.
2. Hold the wing tip for the left or right ear in one hand, and the corresponding earbud in the other.
3. Hook the wing tip’s groove to the earbud’s fixation hook on one side and gently pull the wing tip to cover the earbud. Do not pull the wing tip excessively when you attach or detach it because it may tear.
4. Follow the same procedure for the other earbud.

Wear the Earbuds

Place the earbuds in your ears correctly for a comfortable fit.

1. Select the right or left earbud, and insert the lower half (with the speakers) into the bottom part of the corresponding ear.
2. Tuck the top half of the earbud (with the wing tip)Â in the upper part of your ear. Adjust for a comfortable fit. The touch-sensitive sensor will detect that you are wearing the earbuds when you put them on and emit a sound.

Coupling Earbuds

Should you lose one of the earbuds, you can buy a replacement and couple the old and new earbuds together.

1. Insert the earbuds into the charging case. The earbud battery indicator light will flash red to indicate that the earbuds are not coupled.
2. Tap and hold the touch area on both earbuds for seven seconds or more. When the earbud batter indicator light flashes green and then turns off, the earbuds are coupled and ready for use.

Start Using Your Device

To start using your earbuds connect them to your device.

Connect the Earbuds to Your Phone

To connect your earbuds to a smartphone, install the Galaxy Wearable app on the smartphone. You can download the app from the Galaxy Store or the Google Play™ store.
Galaxy Wearable is compatible with select devices using Android 5.0 and later with at least 1.5 GB RAM. Supported devices may vary by carrier and device. Some features may not be available. For best results, connect with compatible Samsung Galaxy devices. Visit samsung.com/us/support/owners/app/galaxy-wearable-watch for a list of compatible smartphones.

1. Open the charging case to enter Bluetooth pairing mode.
   • You can also enter Bluetooth pairing mode while wearing the earbuds by press and holding the left and right touch areas on the earbuds at the same time.
2. From the Apps screen of the smartphone, tap Galaxy Wearable. If necessary, update the app to the latest version.
3. Tap Get started and select your device.
4. Follow the prompts to complete the connection.
   NOTE: When connecting earbuds with a mobile device that has a Samsung account, the earbud pairing information will be synced to other devices that use the same Samsung account.

Disconnect

1. From Galaxy Wearable, tap Menu.
2. Tap Disconnect.

Use Touch Controls

Use the touch area on the earbuds to control your music, phone calls, and other useful shortcuts without getting out your phone.

Single Tap
Lightly tap the touch pad one time for the following options:

• Play a track.
• Pause a track.

Double Tap
Quickly tap the touch pad two times for the following options:

• Play the next track.
• Answer or end a call.
• Place the current call on hold and answer a second incoming call.
• Switch between a current call and a call placed on hold.

Triple Tap
Quickly tap the touch pad three times for the following options:

• Play previous track.
• Start the current track over at the beginning.

Touch and Hold

Touch and hold the touch pad for the following options:

• Activate a custom shortcut. See Touch controls for more information.
• Decline a call.
• Turn the microphone on or off during a call.
• Retrieve a called placed on hold after ending the current call.

Music Features

Once connected to your phone, when you play music, videos, or other audio files the sound will come through your earbuds. You can use the touch area on the earbuds to control how the audio is played.

Volume Controls

You can adjust the volume by tapping and holding the touch area on your earbuds.

1. From Galaxy Wearable, tap Touch controls.
2. Tap Left or Right and choose Volume down or Volume up. Once you have set this option for one earbud, the other will be automatically set.

Adjust the Volume
Once the touch control options are set, you can adjust the volume without using your phone.

• To turn the volume up, tap and hold the right earbud touch area until the volume has been increased the desired amount.
• To turn the volume down, tap and hold the left earbud touch area until the volume has been decreased the desired amount.

Playback Controls

Navigate your playlist using the touch area on your earbuds.

Call Features

Answer and control calls using your earbuds.

Incoming Calls

When you receive a call while wearing the earbuds, the ringtone will play in the earbuds. You can also configure your earbuds say the phone number or name that is saved in your contacts of the incoming call.

1. From Galaxy Wearable, tap Read notification aloud.
2. Tap Incoming call to enable voice notifications.
3. Tap See all, and tap the drop down menu.
4. Tap All > Contacts to enable this feature.

Phone Controls

Manage calls by tapping the touch area on your earbuds.

Call Waiting

If you receive an incoming call while already on a call, the earbuds will emit a sound.

• To reject the incoming call and stay on the current call, touch and hold the touch area on either earbud.
• To answer the incoming call and place the current call on hold, double tap the touch area on either earbud.
• To switch between the current call and one placed on hold, double tap the touch area on either earbud.

Galaxy Wearable App

• Battery level
• Noise canceling
• Equalizer
• Touch controls
• Read notifications aloud
• Advanced
• Labs
• Find my earbuds
• General
• Earbuds software update
• Tips and user manual
• About earbuds

Battery Level

The Galaxy Wearable app displays the battery level for the earbuds and charging case at the top of the screen. When the battery is low a notification will display on your phone.

• Open Galaxy Wearable to view the battery percentage for the earbuds and charging case.

Noise Canceling

Enable the noise canceling feature to reduce unwanted ambient sounds.

• From Galaxy Wearable, tap Active noise canceling to enable this feature.

Equalizer

Select from six different equalizer presets for a unique sound.

• From Galaxy Wearable, tap an option under Equalizer to change the sound settings.

Touch Controls

Tap the touch area on your earbuds to activate different controls. The left and right earbuds can be assigned different shortcuts.

TIP: If the touch controls become unresponsive, place the earbuds in the charging case for seven seconds or more to restart them.

Customize Touch Controls

Set the shortcuts for each earbud.

1. From  Galaxy Wearable, tap Touch controls.
2. Tap Left or Right and tap an option to set the touch control for that earbud:
   • Active Noise Canceling: Activate the noise canceling feature. For more information, see Noise canceling.
   • Voice Command: Activate Bixby.
   • Volume Up or Volume Down: The right earbud is volume up, and the left is volume down. Once one has been set, the other will automatically update to the volume control option.
   • Spotify: Launch the Spotify app.

Block Touch Controls

Prevent unintended actions by turning off the touch controls.

1. From Galaxy Wearable, tap Touch controls.
2. Tap Block touches to disable the touch control feature.

Read Notifications Aloud

Have text notifications from your phone read aloud on your earbuds.

1. From  Galaxy Wearable, tap Read notification aloud.
2. Tap On to enable the feature.
   • To hear notifications from your phone on your earbuds, even while using your phone, tap Read aloud while using phone.
   • To choose which app notifications are read aloud, tap an app in the list. You can tap See all for additional apps. Sort the list by Read aloud, Not read aloud, and All.

Advanced

Explore the earbud’s advanced features.

Bixby Voice Wake-up

Activate Bixby by saying “Hi Bixby” while wearing your earbuds. Not all Bixby functions are available. This option is available only when connected to Bixby-enabled Samsung phones.

• From Galaxy Wearable, tap Advanced > Bixby voice wake-up to enable the feature.

Seamless Earbud Connection

Switch quickly to nearby devices without disconnecting your earbuds or turning on pairing mode. This works with any nearby device that’s signed in to your Samsung account, even if it has never paired with your earbuds before.

1. From Galaxy Wearable, tap Advanced > Seamless earbud connection.
2. Tap On to enable the feature.

Labs

Explore the earbud’s experimental features.

Gaming Mode

Minimize the audio delay for vivid, synchronized gaming sound. For the best experience, keep your earbuds near your phone. This feature is only available when connecting with a Samsung mobile device.

1. From Galaxy Wearable, tap Labs.
2. Tap Gaming mode to enable the feature.

Relieve Pressure with Ambient Sound

This feature can prevent a feeling of stuffiness or compression when you’re not using active noise canceling.

1. From Galaxy Wearable, tap Labs.
2. Tap Relieve pressure with ambient sound to enable the feature.

Find my Earbuds

If you misplace your earbuds, your phone can help you find it.

1. From Galaxy Wearable, tap Find my earbuds.
2. Tap Start. The earbuds will start beeping.
3. Tap Stop once you have located your earbuds.

General

Configure your earbud’s general settings.

Reset

Reset settings to their factory default values and delete all data.

1. From  Galaxy Wearable, tap Reset
2. Tap Reset again to confirm and start the reset.

Earbuds Software Update

Update your earbud’s software for the latest features.

• From Galaxy Wearable, tap Earbuds software update.
  • Download and install: Check for software updates for your earbuds.
  • Last update: View information about the last software update.

Tips and User Manual

Learn useful tips to get the most out of your device, and view the user manual.

• From  Galaxy Wearable, tap Tips and user manual.
  • Swipe right and left to view useful tips.
  • Tap User manual to view the manual.

About Earbuds

View information about the earbuds.

• From  Galaxy Wearable, tap About earbuds for the following information:
  • Device name, model and serial number
  • Legal information
  • Software information
  • Battery information

Learn More

• Videos
  youtube.com/samsungcare
• Tips
  samsung.com/us/support/tips
• Samsung Care
  samsung.com/us/support
• Talk to an agent
  Contact us on Facebook Messenger
  Find us on Facebook
  Follow us on Twitter

Legal Information

READ THIS INFORMATION BEFORE USING YOUR MOBILE DEVICE.
Arbitration Agreement – This Product is subject to a binding arbitration agreement between you and SAMSUNG ELECTRONICS AMERICA, INC. (“Samsung”). You can opt out of the agreement within 30 calendar days of the first consumer purchase by emailing [email protected] or calling 1-800-SAMSUNG (726-7864) and providing the applicable information.
The full Arbitration Agreement, Standard One-year Limited Warranty, End User License Agreement (EULA), and Health & Safety Information for your device are available online at https://www.samsung.com/us/Legal/Gear-HSGuide.

Samsung Knox

Samsung Knox is Samsung’s security platform and is a mark for a Samsung device tested for security with enterprise use in mind. Additional licensing fee may be required. For more information about Knox, please refer to: samsung.com/us/knox.

Restricting Children’s Access to Your Mobile Device
Your device is not a toy. Do not allow children to play with it because they could hurt themselves and others, or damage the device. Keep the device and all its parts and accessories out of the reach of small children.

Interference from Magnets

WARNING:  Potential Interference with Medical Devices from Magnets. The device contains magnets which may interfere with medical devices such as pacemakers, implantable cardioverter defibrillator, or insulin pumps. IF YOU ARE A USER OF ANY OF THESE MEDICAL DEVICES, PLEASE CONSULT WITH YOUR PHYSICIAN.

Do not store or place your device near magnetic fields. Magnetic stripe cards, including credit cards, phone cards, passbooks, hotel keys, and boarding passes, may be damaged by the magnets in the device.

Samsung Electronics America, Inc.
Address: 85 Challenger Road Ridgefield Park New Jersey 07660
Phone: 1-800-SAMSUNG (726-7864)
Internet: samsung.com

SAMSUNG Galaxy Watch4 Classic User Guide

Get to know your device

Galaxy Wearable

Tips and user manual

Get connected

Download the Galaxy Wearable app to connect your device and smartphone.

Activate your Galaxy Watch

The Galaxy Watch4 Classic (SM-R885U & SM-R895U) and the Galaxy Watch4 (SM-R865U & SM-R875U) are 4G LTE-enabled. Get texts, make and receive calls, even when you leave your phone behind. Consult your service provider for details about activation.

APPROVED FIRMWARE VERSIONS

This device will only operate with firmware versions that have been approved for use by your wireless carrier and the device manufacturer. If unauthorized firmware is placed on the device it will not function.

INFORMATION ABOUT SAFEGUARDING DEVICES

We encourage customers to take appropriate measures to secure their devices and invite them to take advantage of the features available on this device to help secure it from theft and/or other unauthorized access and use. This device has a locking function (e.g., user-defined codes or patterns) that can serve as a first line of defense against unauthorized use or access to stored information. Reloaded security applications that allow customers to track or locate misplaced devices can be found on several devices. Lost or stolen devices should be immediately reported to your wireless carrier so that proper measures can be taken to protect accounts. For additional information, visit your wireless carrier’s Privacy Policy.

Terms and Conditions

Important legal information

Read this document before operating the mobile device, accessories, or software (defined collectively and individually as the “Product”) and keep it for future reference. This document contains important Terms and Conditions. Electronic acceptance, opening the packaging, use, or retention of the Product constitutes acceptance of these Terms and Conditions.

Arbitration Agreement – This Product is subject to a binding arbitration agreement between you and SAMSUNG ELECTRONICS AMERICA, INC. (“Samsung”). You can opt out of the agreement within 30 calendar days of the first consumer purchase by emailing or calling 1-800-SAMSUNG (726-7864) and providing the applicable information.

The full Arbitration Agreement, Standard One year Limited Warranty, End User License Agreement (EULA), and Health & Safety Information for your device are available online at www.samsung.com/us/support/legal/mobile

If your device required Federal Communications Commission (FCC) approval, you can view the FCC certification on the watch by opening Settings > About watch > Device.

Samsung Knox

For more information about Knox, please refer to: www.samsung.com/us/knox

Specific Absorption Rate (SAR)

For information about SAR, visit:

• www.fcc.gov/general/radio-frequencysafety-0
• www.fcc.gov/encyclopedia/specificabsorption-rate-sar-cellular-telephones
• www.samsung.com/sar

Samsung mobile products and recycling

WARNING! Never dispose of batteries in a fire because they may explode. Do not disassemble, crush, puncture, heat, burn or reuse. For more recycling information, go to our website:
www.samsung.com/recycling or call 1-800-SAMSUNG.

FCC Part 15 information and notices

This device complies with part 15 of the FCC Rules. Operation is subject to conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Emergency calls

Emergency calls may not be possible on all wireless mobile device networks or when certain network services and/or mobile device features are in use. Check with local service providers. If certain features are in use (e.g. call blocking) you may first need to deactivate those features before you can make an emergency call.

Exposure to Radio Frequency (RF) signals

For information, go to www.samsung.com/us/support/legal/mobile>Health and Safety Information > Exposure to Radio Frequency (RF) signals.

For additional Health & Safety information, including Samsung’s Knox security platform, Maintaining Dust & Water Resistance, Navigation, GPS, AGPS, and Wireless Emergency Alerts (WEA), see

English

www.samsung.com/us/support/legal/mobile

Spanish: 

www.samsung.com/us/support/legal/mobile-sp

Use only Samsung-approved charging devices and accessories. Using other accessories may void your warranty and may cause damage.

Need support?

Samsung Care+

Get coverage for repairs and 24/7 dedicated support.

Visit Samsung.com/us/support/samsung-care-plus

Samsung Support

Get direct access to FAQs, tips and tricks, videos, and more.

Visit samsung.com/us/support

Samsung Care – YouTube

Check out the latest support videos to help you with your Samsung product.

Visit Youtube.com/samsungcare

Samsung Electronics America, Inc

85 Challenger Road
Ridgefield Park, New Jersey 07660
Phone: 1-800-SAMSUNG (726-7864)
Internet: www.samsung.com

© 2021 Samsung Electronics America, Inc. Samsung & Samsung Galaxy are registered trademarks of Samsung Electronics Co., Ltd. Other company and product names mentioned herein may be trademarks of their respective owners. Screen images simulated. Appearance of device may vary. Images shown are for reference only. If you use a screen protector, make sure it allows for use of touch-screen features.

FAQS

What is Samsung Galaxy Watch4 Classic?

The Samsung Galaxy Watch4 Classic is a smartwatch from the company’s Galaxy Watch series. It features a 1.2-inch circular Super AMOLED display with 360 x 360 resolution, a rotating bezel, and a water-resistant design. The device runs on Tizen OS 4.0 and is powered by Exynos 9110 Dual core 1.15GHz processor with 768MB of RAM.

What are the key features of Samsung Galaxy Watch4 Classic?

The key features of the Samsung Galaxy Watch4 Classic include 4G LTE connectivity, IP68 dust and water resistance, rotating bezel, heart rate sensor, barometer sensor, accelerometer, gyroscope, GPS/Glonass/Beidou/Galileo sensors, 512MB RAM, 768MB storage space and 300mAh battery capacity.

How much does the Samsung Galaxy Watch4 Classic cost?

The price of the Samsung Galaxy Watch4 Classic in India ranges from Rs 28,990 to Rs 32,990 depending on the colour variant you choose. It comes in Black colour option.

Where can I buy the Samsung Galaxy Watch4 Classic?

You can buy the Samsung Galaxy Watch4 Classic from Amazon or Flipkart .

How waterproof is the watch?

Secondly, a lot of people seem to be answering without having a single shred of evidence of even the right information. Like saying that Samsung says that you can use the watch no more than five (5) meters while in fact it’s fifty (50) that’s quite a difference.

That watch has a waterproof of 5 ATM + 68

ALSO I WILL QUOTE :

“Water-resistant up to 50 meters per ISO standard 22810:2010. Not intended for scuba diving. Avoid excessive, sudden temperature changes and high-velocity activities. Rinse in fresh water/dry after use in sea water or chlorinated water.”
so now you get the right information!

Does the watch support indoor cycling?

Yes

Does this watch work for golfers ?

No, if the watch detects a golf club nearby it will shut off.

Can you purchase this watch with my health spending account

That’s a good question for you fsa Manager

What is the size of the band?

20 mm

Can you record voice memos?

Yes. And you can record up to 10 minutes of converted speach to text.

Is this the samsung electronics galaxy watch 4 classic 46mm that came out in 2021?

Yes

does Samsung watch 4 measure bp?

No

Where is this watch made?

In a Samsung factory

What is the privacy policy like? Does the watch require an app? Does Samsung share the information gathered about health and the phone?

Sure your information is shared! Every company that collects your data will share it at some point. And yes you need a separate app to use the health features of the watch. (Samsung Health)

Does it track the steps you walk?

Yes, very accurate.

Can it upload your activities to Strava?

Yes

When will the galaxy watch 4 monitor B.P.

It does monitor BP. Just have to dl the app to go with it.

Signature Features

Counter Depth
Built-in look for a seamless fit. The smooth and streamlined exterior design features beautiful flat doors and easy-to-open recessed handles that blend seamlessly into your cabinetry, adding function and style to your kitchen.
Wi-Fi Enabled
Use the SmartThings App1 on your smartphone to control the temperature and monitor your refrigerator remotely.
Available on Android and iOS devices. A Wi-Fi connection and a Samsung account are required.
ENERGY STAR® Certified
Eco-friendly and energy-efficient. 2
Visit www.energystar.gov for more information on ENERGY STAR® guidelines.
Fingerprint Resistant Finish
A finish that withstands everyday smudges, so you spend less time cleaning.

Available Colors

Fingerprint Resistant
Stainless Steel (shown)

Fingerprint Resistant
Black Stainless Steel

Black Stainless Steel
White

Design

• Counter-Depth
• Recessed Handle
• Flat Door Design
• Fingerprint Resistant Finish
• LED Lighting
• Gallon Door Bins
• Humidity-Controlled Crispers Black

Technology

• Wi-Fi Enabled
• Adjustable Top Freezer Shelf
• Door Alarm
• Water Filter Indicator
• Sabbath Mode

Performance

• Twin Cooling Plus®
• Power Cool & Freeze
• Ice Maker – Stores up to 5.5 lbs of ice
Rating
ENERGY STAR® rated:
540 kWh/yr
ADA Compliant Compliant

Installation Specifications

1. Measure the height, width, and depth of the opening, making sure to include baseboards, molding tile, countertop overhang, etc. Check to be sure there is enough room to open the door (consider walls, islands, or other obstacles when measuring).
2. Refer to the illustration below to determine dimensions.
3. Allow 3¾” of clearance on the hinge side of the refrigerator when installing next to a wall where the handle may make contact.
4. Allow 2″ minimum clearance at rear for proper air circulation and water/electrical connections. Allow a 3/8″ minimum clearance at sides and top for ease of installation.
5. Ensure each door and entryway in the home is wide enough for the refrigerator to be moved through easily.
For optimal usage and the ability to open refrigerator doors completely, do not install next to a wall.
Please note: The following dimension and cutout information is for planning purposes only. For complete installation details, consult manual packed with product or download manual online at samsung.com.

Dimensions

Total Capacity: 17.5 cu. ft.
Refrigerator: 11.7 cu. ft.
• 3 Tempered Glass Spill-Proof Shelves
• 2 Humidity-Controlled Crispers
• 6 Door Bins
– Right Door: 1 Gallon Bin, 2 Regular Bins
– Left Door: 1 Gallon Bin, 2 Regular Bins
• LED Lighting

Freezer: 5.8 cu. ft.
• Automatic Ice Maker
• EZ-Open Handle™
• LED Lighting
Warranty
One (1) Year Parts and Labor on Refrigerator
Five (5) Years Parts and Labor on Sealed Refrigeration System Only*
Ten (10) Years Parts and Five (5) Years
Labor on Digital Inverter Compressor
*Compressor, evaporator, condenser, drier, and connecting tubing.

Product Dimensions & Weight
Dimensions (WxHxD with hinges, and doors):
32 1/8″ x 70″ x 28 1/8″
Dimensions (WxHxD without hinges and door):
32 1/8″ x 68 7/8″ x 24 1/2″
Weight: 205 lbs
Shipping Dimensions & Weight (WxHxD)
Dimensions: 34 5/8″ x 75″ x 30 1/2″
Weight: 223 lbs

Actual color may vary. Design, specifications, and color availability are subject to change without notice. Non-metric weights and measurements are approximate.
©2021 Samsung Electronics America, Inc., 85 Challenger Road, Ridgefield Park, NJ 07660. Tel: 800-SAMSUNG. samsung.com. Samsung is a registered trademark of Samsung Electronics Co., Ltd.

Thank you for purchasing this Samsung product.

To receive more complete service, please register your product at www.samsung.com

Model Serial No……………….Serial No………………..

If you have any questions, please call us at 1-800-SAMSUNG (1-800-726-7864) for assistance.

Figures and illustrations are provided for reference only and may differ from the actual product appearance.

Product design and specifications may change without notice.

Contact SAMSUNG WORLDWIDE

Accessibility contact information in the U.S.A.:

If you experience issues, please do not take the TV back to the store.

In the United States of America, call us at 1-800-SAMSUNG (1-800-726-7864) or visit us at www.samsung.com or
www.Samsung.com/spin for support and warranty service.

Before Reading This User Manual

This VV comes with this User Manual and an embedded e-Manual ( > Settings> e-Manual).
On the website (www.samsung.com), you can download the manuals and see their contents on your PC or mobile device.

Warning! Important Safety Instructions
Please read the Safety Instructions before using your TV. Refer to the table below for an explanation of symbols that may be on your Samsung product.