• Remove personal metal items such as rings, necklaces, watches, and bracelets when working with a battery. Be extra cautious not to drop a metal wrench onto the battery, bridging the terminal posts. The battery may spark and short circuit, and explode.

Is the Battery Fully Charged?

State of battery can be determined by Hygrometer testing of electrolite in the battery, or the voltage of the battery as measured with no load and a good quality digital voltmeter.

• Be careful if you are hooking up the inverter to a battery just off the charger.

The AC outlets are controlled by the Circuit Breaker. This device will shut the power off automatically when the AC output is over limit, this may occur to all AC outlets or only one single AC outlet. The Inverter can be turned on again after the AC plugs have been removed from the AC Outlets and push the circuit breaker reset button(s).

3. When you have confirmed that the appliance to be operated is turned off, plug the appliance into one of the 110V AC Outlets on the front panel of the inverter. When making the connection to the inverter, the following sequence is recommended.

1. Low Voltage Alarm. An alarm will sound when the voltage from the battery discharges, to