TAOTRONICS TT-BA01 Wireless Portable Bluetooth Transmitter
Product Diagram
- LED Indicator
- Power Button
- 3.5mm Audio Output Port
- Micro USB Charging Port
Package Contents
- 1xTaoTronics TT-BA01 Wireless Transmitter
- 1xUSB Charging Cable
- 1×3.5mm Female to 2 RCA Male Cable
- 1xUser Guide
How to Use
Charging
- Connect the charging port with any USB charging adapter or active computer USB port.
- Charging will start automatically with LED indicator turning red.
- The transmitter is fully charged when LED indicator turns off. Note: Make sure the battery is fully charged before putting the transmitter away tor storage. Charge the transmitter at least once every 3 months when not using tor a long time.
Pairing
- Make sure the transmitter and your Bluetooth device are next to each other (within 3 feet).
- The first time you use the transmitter, press and hold the Power Button until the LED indicator flashes red and blue alternately. Now the transmitter is in pairing mode.
- Please follow the instruction of your Bluetooth receiving device to bring it into pairing mode and it should automatically pair with the TT-BA01. Once connected, the LED indicator will turn red and then flash blue.
Note:
- The Bluetooth’ transmitter can remember previous paired devices.
- If the transmitter cannot pair with your Bluetooth device, clear the pairing history by pressing the Power Button twice when the transmitter are on until the LED indicator tlashes red and blue alternately. Then restart the transmitter to pair again. You may need to try this a tew times if it does not work on your first attempt.
- In order to achieve low latency, please make sure your receiving Bluetooth device also support Qualcomm® aptXT
Low Latency codec, otherwise you may experience noticeable lag between sound and picture. Please do not connect TT-BA01 to an amplifier output, which may cause over-voltage and damage the adapter.
