Manufactured by WillFul
FAQs
Multi point connection
Could only play music from one phone for multi point connection, need to stop one to play another .
Automatic power off
M98 will automatic power off when unconnected with any devices in 10 minutes.
How to reconnect?
M98 will reconnect automatic with the paired devices when power on. If it can not reconnect automatically, please find the M98 in your Bluetooth device list and connect it manually.
How to delete the paired records?
In the power-on state,press and hold the volume “+” button and the volume “-” button at the same time for 5 seconds to clear the pairing record. When the indicator light flash in red and blue for once simultaneously ,then the pairing record has been cleared,and the headset will not be connected to the previously connected device automatically.Please try to clear the pairing record once there are any connection errors.
Password for connect?
Please try 0000 (four zero ), 8888 (four eight ), 1111 (four one), 1234 (one two three four) as password for connection when need for some devices.
Charging power supply?
Charging power supply: 5V, ?.500 MAH. (Charger, car charger, computer USB etc.)
What is the advantage of using single-point microphone?
Using a single-point microphone can effectively reduce the ambient noise so that the other party can clearly hear your own voice and improve the quality of the call. The call effect is far superior to that of an ordinary omnidirectional microphone (a structure with a microphone bar is required, otherwise the speaking voice Will be smaller)
How do you connect a willful Bluetooth headset?
Turn off the headset and turn on again to enter into pairing mode, search and click to connect “M98″on the second device (phone, PC, laptop etc.) Bluetooth device lists. LED turns to low Blue LED flash once every 10 seconds after connected.
Does P47 Wireless have mic?
Wireless Headphones, P47 Bluetooth Over Ear Foldable Headset with Microphone Stereo Earphones 3.5mm Audio Support FM Radio TF for PC TV Smart Phones & Tablets etc (Green)
When I power on the headset, the blue light flashes, what’s the problem?
Please check if the headset is in pairing mode. If yes, please try to pair it with your phone again. If no, please charge it for a while and then try again.
When I power on the headset, the blue light is on but there is no voice or music, what’s wrong?
Please check if your phone supports A2DP function. If yes, please check if your phone supports AVRCP function. If yes, please check if you have paired your phone successfully with this headset. If not, please reset your headset to factory default settings and then pair it with your phone again.
Why does my Bluetooth device disconnects automatically?
This may be caused by weak signal strength due to distance between Bluetooth devices or obstacles blocking signal path between them. In this case, move closer to the Bluetooth device or remove obstacles between them to restore signal strength; otherwise move away from these devices or turn off these devices to avoid interference. Or you can change the frequency of this device manually (Refer to manual).
How do you pair willful earbuds?
Just take Willful T1 out of the charging case, the earbuds will pair with each other and enter pairing mode automatically, then turn on the bluetooth in your cellphone or other devices, click “T1” in bluetooth list to complete the pairing.
How long do p47 headphones last?
Support TF card and FM radio, Built-in Battery: With high performance rechargeable polymer battery, this headphon e provides 8-10 hours of music time, less than 1 hours of charging time FUNCTIONAL!
How do you turn on earbuds?
Tap the headphones listed. On an Android device, pull down the shade from the top of the phone and long-press the Bluetooth icon. It’ll bring you right to the Bluetooth menu where you can turn it on and then search for devices. Tap the name of the headphones you’re trying to pair.
How do you turn on TWS earbuds?
Press and hold the power/pairing button on each earphone for up to 2-3 seconds to turn them on. You will hear a voice prompt with “Power On”.
How do you charge willful earbuds?
When the earbuds are fully charged, the indicators of the charging box will go off. Please connect the Type-C plug of the Type-C charging cable to the Type-C charging port of the charging box; connect the USB plug to the USB charger (vehicle charger, portable charger, computer USB port, etc.).
Why are my headphones not charging?
Inspect the charging port of your headphones for any damage like bent connectors or bent metal. Also, make sure that the port itself isn’t loose when you touch it, as this could be a sign that the connectors have detached from the headset.
Why is Bluetooth not finding devices?
Even if Bluetooth is turned on, your phone itself might not be ‘discoverable’. This means that a Bluetooth device you haven’t yet paired cannot see your phone. To make it visible to other devices, open the main Bluetooth settings. On Android, phones remain discoverable so long as you stay on that screen.
Why are my Bluetooth headphones not connecting?
For Android phones, go to Settings > System > Advanced> Reset Options > Reset Wi-fi, mobile & Bluetooth. For iOS and iPadOS device, you’ll have to unpair all of your devices (go to Setting > Bluetooth, select the info icon and choose Forget This Device for each device) then restart your phone or tablet.
Where is the power button on Bluetooth headphones?
It is the middle of the “3” that you are referring to. It’s great because all functions are on the same side. The middle button also acts as the “answer and hangup” button if you are choosing to connect to your phone.
How do you charge TWS earbuds without a case?
To charge Earbuds with a micro USB, you need to plug a Micro USB cable into your device and either into a computer or a USB adapter. Then you have to sit and wait until your earphones get fully charge.
Why are my Bluetooth headphones not turning off?
Press the power button and hold it for 10 seconds. If the reset is successful, the LED light will blink to show that you have reset it. You may also reset the Bluetooth by pressing and holding the volume and mode down. While in other cases, you may need to press and hold both the volume up and volume down buttons down.
What is the button on my earbuds for?
Pressing and holding the button 10 seconds with the lid open will reset the earbuds and erase all “memory data”.
