The ZERO GamePad supports many devices and platforms thanks to the multiple modes it can switch between. PC, Smartphone, iPad, Notebook, Android, iOS, Mac

OSX, Windows are supported. Making the ZERO GamePad ideal for all popular systems and devices.

To relive the happy memories of the past.

FAST START UP

Learn how to connect the Zero GamePage to Macs as well as PCs, Android and iOS in the table below.

It can function as a traditional gamepad or mimic your keyboard as seen in the columns below.

Modes

1. For Android devices, use GamePad.
2. For iOS devices, use Mode Bluetooth Keyboard or iCade.
3. For games that only support touchscreen controls, use Emu-Touch Screen.

To turn off the controller

• Hold down the button for 2 seconds.

Selfie Mode Instructions

Android/iOS

1. Press on the SELECT button on the gamepad for 2 seconds;
2. Turn on Bluetooth on your other device, find ‘8Bitdo ZERO GamePad’, choose it to connect;
3. D-pad buttons for iOS, four face buttons (A, B, X, Y) for Android.

8Bitdo SN30 Pro / SF30 Pro

1. Press START to turn on the controller.
2. Press and hold START for 3 seconds to turn off the controller.
3. Press and hold START for 8 seconds to force turn off the controller.

Bluetooth Connection

Switch

1. Press STARTH to turn on the Controller, LEDs will start to rotate from left to right.
2. Press and hold PAIR for 2 seconds to enter pairing mode. LEDS will turn off for a second then start to rotate from | left to right.
3. Go to your Switch Home Page to click on Controllers, then click on Change Grip/Order and wait for controller to sync up. LED will become solid when connection is successful.
4. Controller will auto-reconnect to your Switch with the press of START once it has been paired

STAR button = Switch screenshot button, Home button = Switch HOME button.

Android

1. 1. Press START+B to turn on the controller, LED 1 will start to blink
2. 2. Press and hold PAIR for 3 seconds to enter pairing mode. LED will rotate from let to right.
3. 3. Go to your Android devices Bluetooth seting, pair with [8Bitdo SF30 Pro] or [8Bitdo SN30 Proj]. LED will become solid when connection is successful.
4. 4. Controller will auto-reconnect to your Android device with the press of START once it has been paired.

USB Connection: connect the controller to your Android device via USB Cable after step 1.

Windows

1. Press START+X to turn on the controller, LEDs 1.2 will start to blink.
2. Press and hold PAIR for3 Seconds to enter pairing mode. LEDs will rotate from left to right.
3. Go to your Windows devicer Bluetooth setting, pair with [BBltdo SF30 Pro] or [8Bitdo SN30 Pro]. LED will become solid when connection is successful.
4. Controller will auto reconnect to your Windows device with the press of START once it has been paired.

USB Connection: connect the controller to your Windows device via USB Cable after step 1

macOS

1. Press and hold START+A for l second to power on the controller, LEDs 1.2.3 will start to blink.
2. Press and hold PAIR for 3 seconds to enter pairing mode. LEDs will rotate from left to right.
3. Go to your macOS device’s Bluetooth setting, pair with [Wireless Controller]. LED will become solid when connection is successful.
4. Controller will auto reconnect to your Windows device with the press of START once it has been paired.

USB Connection: connect the controller to your macOS device via USB Cable after step 1.

T Turbo function

1. 1. Hold the button you would like to set turbo functionality to and then press the STAR button to activate turbo functionality.
2. 2. HOME LED will blink when turbo functionality has been applied successfully.
3. 3. All buttons with Turbo functionality activated will cause the HOME LED to blink, showing you that Turbo functionality is active on that button.
4. 4. To deactivate turbo function, hold the button with turbo functionality activated press the STAR button to deactivate turbo functionality. The HOME LED will no longer blink if you have successfully disabled turbo functionality.

Analog sticks are not included.

This does not apply to Switch.

Battery

• Built-in 480 mAh Li-on with16 Hours of play time.
• Rechargeable via its USB-C cable with 1-2 hour charging time.
• Battery charging time might vary depending on the environment the controller is exposed to.

Power Saving

1. Sleep mode -1 minute with no Bluetooth connection
2. Sleep made – 15 minutes with Bluetooth connection but no use
3. Press START to wake up your controller.

FAQs

How to connect with PC?

You need to install 8Bitdo’s driver firstly, then you can connect the controller to PC.

How to update firmware?

Please refer to the user manual.

Why the controller is not working with my Android device?

Make sure you have installed the latest version of firmware and paired it correctly.

Why the controller is not working with my iOS device?

Make sure you have installed the latest version of firmware and paired it correctly.

How do I turn off 8Bitdo SF30 pro?

Related Documents. User Manual Product name:8Bitdo SN30 Pro v2 Bluetooth GamePad Model: 80DI SF30ProV2 Basic operation Press START to turn on the controller Press and hold START for 3 seconds to turn off the controller. Press and hold START for 8 seconds to force turn off the controller Bluetooth connection Switch 1.

Why is my 8BitDo flashing blue?

Blue light is flashing: Bluetooth disconnected. Solid Blue light: Bluetooth connected. Green light flashing: Battery charging. Green light off means that charging is complete.

How do I reset my 8 bit Pro controller?

Please follow the procedure below to fix the issue:

1. Press and hold START for 8 seconds.
2. Press and hold L1+R1+START for 3 seconds to enter its pairing mode. Red Power LED will turn on.
3. Restart the controller and follow the instruction manual provided on our website afterwards.

How do I sync 8BitDo with my computer?

Go to the Start menu and navigate to your “Bluetooth” dialog. Once your Bluetooth Dialog is open, click on Add Bluetooth or Other Device. Once the LEDs are lit up, press and hold the Pair button at the top of the controller for 3 seconds to enter pairing mode. In Windows, you should see the 8BitDo show up.

Does 8bitDo work on PC?

And it’s compatible with a wide variety of systems. The 8bitDo Pro 2 (opens in new tab) is a wireless and widely compatible gamepad. It works with the Nintendo Switch/Switch OLED, PC, macOS, Android, Steam and even the Raspberry Pi!

How to make 8BitDo (SN30, SN30 Pro) work with iOS and iPadOS 13

On your device, go to Settings > Accessibility > Switch Control > Switches > Bluetooth Devices… (you don’t need to turn switch control “on”) On your SN30 or SN30 Pro, hold Start + A to turn it on in MacOS mode.

Can 8BitDo be paired to multiple devices?

Yes, you can. Just connect them via Bluetooth connection, as long as the device can take multiple Bluetooth devices.

Why is my SN30 Pro not connecting?

Restart your Switch and go back to ‘System Settings’ and choose ‘Change Grip/Order’. E. Re-sync the controller to your Switch from scratch. Y+START is the key combination for putting the controller on the right mode.

SN30 Pro+ Bluetooth Gamepad

SN30 Pro+ Bluetooth Gamepad

OVERVIEW

• Press start to turn on the controller.
• Press & hold start for 3 seconds to turn off the controller.

Switch

1. press & hold Y & start to turn on the controller then press pair button for 3 seconds to enter its pairing mode. LED starts to rotate from left to right.
2. go to your Switch Home Page to click on Controllers, then click on Change Grip/Order. LED becomes solid when connection is successful.
3. controller will auto reconnect to your Switch with the press of start once it has been paired.
   • when connected to your Switch, star button= Switch Screenshot button, home button= Switch HOME button.

Android CD – input)

1. press & hold B & start to turn on the controller then press pair button for 3 seconds to enter its pairing mode. LED starts to rotate from left to right.
2. go to your Android device’s Bluetooth setting, pair with [BBitDo SN30 Pro+]. LED becomes solid when connection is successful.
3. controller will auto reconnect to your Android device with the press of start once it has been paired.
   • USB connection: connect your SB it Do controller to your Android device via USB Cable after step 1.

Windows (X – input)

1. press & hold X & start to turn on the controller then press pair button for 3 seconds to enter its pairing mode. LED starts to rotate from left to right.
2. go to your Windows device’s Bluetooth setting, pair with [BBitDo SN30 Pro+]. LED will become solid when connection is successful.
3. controller will auto reconnect to your Windows device with the press of start once it has been paired.
   • USB Connection: connect your 8BitDo controller to your Windows device via USB Cable after step 1.

macOS

1. press & hold A & start to turn on the controller then press pair button for 3 seconds to enter its pairing mode. LED starts to rotate from left to right.
2. go to your macOS device’s Bluetooth setting, pair with [Wireless Controller]. LED becomes solid when connection is successful.
3. controller will auto reconnect to your macOS device with the press of start once it has been paired.
   • USB connection: connect the controller to your macOS device via USB cable after step 1.

Turbo function

1. hold the button you would like to set turbo functionality to and then press the star button to activate/deactivate its turbo functionality.
   • d-pad and analogue sticks are not included.
   • this does not apply to Switch mode.

Battery

status →→→→→→→→→→→→→ LED indicator
low battery mode →→→→→→→→ Red LED blinks
battery charging →→→→→→→ Red LED stays solid
battery fully charged→→→→→→→→LED turns off

• two double A batteries with 20 hours of play time.
• 20 hours of play time with a rechargeable battery pack.
• rechargeable with 4 hour charging time.

Power Saving

• 1 minute with no Bluetooth connection, will power off.
• 15 minutes with Bluetooth connection but no use, will power off.

Support

Please visit support.8bitdo.com for further information & additional support.

How do I pair my SN30 Pro+ Bluetooth?

press & hold B & start to turn on the controller then press pair button for 3 seconds to enter its pairing mode. LED starts to rotate from left to right. go to your Android device’s Bluetooth setting, pair with [BBitDo SN30 Pro+]. LED becomes solid when connection is successful.

How to connect controller to my PC?

Please press and hold X + Start button for 3 seconds to enter the pairing mode.

How to connect controller to my Android device?

Please press and hold X + Start button for 3 seconds to enter the pairing mode.

How to connect controller to my Switch?

Please press and hold X + Start button for 3 seconds to enter the pairing mode. Then go to your Switch Home Page to click on Controllers, then click on Change Grip/Order. LED becomes solid when connection is successful. Controller will auto reconnect to your Switch with the press of start once it has been paired. When connected to your Switch, star button= Switch Screenshot button, home button= Switch HOME button.

How long can I play with one charge?

You can play up to 20 hours with one charge. The actual time may vary depending on the usage conditions and environment.

How do I connect my SN30 Pro+ Pro to my Iphone?

On your device, go to Settings > Accessibility > Switch Control > Switches > Bluetooth Device.
On your SN30 or SN30 Pro, hold Start + A to turn it on in MacOS mode.
The controller will show up as “Wireless Controller” or “DUALSHOCK 4” depending on your iOS version, tap it, and you’re all set!

Do 8BitDo controllers work with iPhone?

Prices taken at time of publishing. This Bluetooth controller can control your Nintendo Switch, PC, Mac, Android, and iOS devices.

How do I reset my SN30 Pro+ controller?

Power On by pressing START (and optionally a button combination) for 1 second. Power Off by pressing START for 3 seconds. Enter Bluetooth pairing mode by pressing SELECT for 3 seconds. To restore to factory settings (or force power off) hold down the START button for 8 seconds.

How do you know when SN30 Pro+ is charged?

A. LED blinks once: connecting to Android, Windows 10, Raspberry Pi, macOS.
B. LED blinks 3 times: connecting to iOS.
C. LED blinks 5 times: camera selfie mode.
D. Red LED: low battary.
E. Green LED: battery charging (LED turns off when battery is fully charged)

How do I update my SN30 Pro+ controller FIRMWARE?

Controller you’re going to plug it into your usb port on your computer plug the other end into the controller. Once you do you’ll come to the screen that you see here which says firmware update.

Does SN30 Pro+ on PC?

And it’s compatible with a wide variety of systems. The SN30 Pro+ (opens in new tab) is a wireless and widely compatible gamepad. It works with the Nintendo Switch/Switch OLED, PC, macOS, Android, Steam and even the Raspberry Pi

How many wireless controllers can connect to PC?

four controllers
So the final answer is yes, you can connect four controllers (clients) to one adapter (host) at a time.

SN30 Pro+ Bluetooth Gamepad
www://8bitdo.com/sn30-pro-plus/

Bluetooth Connection

Controllers will auto reconnect to your devices once they have been paired

Android (D-input)

1. Press and hold POWER for 1 second to power on the controller, LEDs will blink once per cycle.
2. Press and hold PAIR for 3 seconds to enter pairing mode. Blue LEDs will rapidly blink.
3. Go to your Android device’s Bluetooth setting, pair with [8Bitdo xx Pro].
4. LEDs will be solid blue when the connection is successful.

USB Connection: connect your 8Bitdo controller to your Android device via USB Cable after step 1

Windows (X-input)

1. Press and hold POWER + X for 1 second to power on the controller, LEDs will blink twice per
   cycle.
2. Press and hold PAIR for 3 seconds to enter pairing mode. Blue LEDs will rapidly blink.
3. Go to your Windows device’s Bluetooth setting, pair with [8Bitdo xx Pro(x)].
4. LEDs will be solid blue when connection is successful.
   USB Connection:connect your 8Bitdo controller to your Android device via USB Cable after step1

macOS

1. Press and hold POWER + A for 1 second to power on the controller, LEDs will blink three times per cycle
2. Press and hold PAIR for 3 seconds to enter pairing mode.Vlue LEDs will rapidly blink
3. Go to your macOS device’s Bluetooth setting ,pair with [Wireless Controller]
4. LEDs will be solid blue when connection is successful.

USB connection: connect your 8Bitdo controller to your macOS device via USB cable after step1

Switch (by default)

1. Press and hold POWER+Y for 1 second to power on the controller, LEDs will blink four times per cycle
2. Go to your Switch Home Page to click on Controllers,then click on Change Grip/Order
3. Press and hild PAIR for 3 seconds to enter pairing mode.Blue LEDs will rapidly blink
4. LEDs will be solid blue when connection is successful.When Connected to your Switch ,POWER button = Switch HOME button;

PAIR button = Switch screenshot button

8BitDo NES30 Classic Controller Instruction Manual

Bluetooth Connection

• Controllers will auto reconnect to your devices once they have been paired.

Android (D-Input)

1. Press and hold START for 1 second to power on the controller, LED will blink once per cycle.
2. Press and hold SELECT for 3 seconds to enter pairing mode. Blue LED will rapidly blink.
3. Go to your Android device’s Bluetooth setting, pair with [8Bitdo NES30 GamePad] or [8Bitdo FC30 GamePad].
4. LED will be solid blue when connection is successful.
   • USB Connection: connect your 8Bitdo controller to your Android device via USB Cable after step 1.

   Windows (X-Input)

1. Press and hold START + X for 1 second to power on the controller, LED will blink twice per cycle.
2. Press and hold SELECT for 3 seconds to enter pairing mode. Blue LED will rapidly blink.
3. Go to your Windows device’s Bluetooth setting, pair with [8Bitdo NES30 GamePad(x)] or [8Bitdo FC30 GamePad(x)].
4. LED will be solid blue when connection is successful.
   • USB Connection: connect your 8Bitdo controller to your Windows device via USB Cable after step 1.

macOS

1. Press and hold START + A for 1 second to power on the controller, LED will blink three times per cycle.
2. Press and hold SELECT for 3 seconds to enter pairing mode. Blue LED will rapidly blink.
3. Go to your macOS device’s Bluetooth setting, pair with [Wireless Controller).
4. LED will be solid blue when connection is successful.
   • USB Connection: connect your 8Bitdo controller to your macOS device via USB Cable after step 1.

Switch (by default)

1. Press and hold START +Y for 1 second to power on the controller, LED will blink four times per cycle.
2. Go to your Switch Home Page to click on Controllers, then click on Change Grip/Order.
3. Press and hold SELECT for 3 seconds to enter pairing mode. Blue LED will rapidly blink.
4. LED will be solid blue when connection is successful.
   • When connected to your Switch, DOWN+SELECT = Switch HOME button.

Battery

• Built-in 480 mAh Li-on withl8 Hours of play time.
• Rechargeable via USB cable with 1 — 2 hour charging time.
• Press START for 8 second to force turn off your controller.

Power Saving

1. Sleep mode – 1 minute with no Bluetooth connection.
2. Sleep mode – 15 minutes with Bluetooth connection but no use.
   • Press START to wake up your controller.

Support

• Please visit http://support.8bitdo.com for further information and additional support. a

8Bitdo Cube Speaker

Everything Old Is New Again

Thank You For Purchasing our 8Bitdo Cube Speaker.
Ready carefully and follow all instructions in this User’s Manual before you use
8 Bitdo Cube Speaker
Keep this User’s Manual in a convenient location for future reference

Safety Instructions

This Product Is specially designed based on the full attention to safety ;
in order to make sure the accident-free operation
please abide the guidelines lsited below

• Always position the unit on a stable and level surface.Unstable surface can cause the unit to topple and fall , resulting in possible damage or injury
• Do not drop ,unpack,open,beat,curve,prink and burn the unit
• Avoid using the unit nearby basins or sinks where it may come in contact with water
• Do not place any ware with full water on the top of unit ,such as vase,glass,pot,and please avoid placingcandle on the speaker surface as well
• Protect the using of the unit from any overheating devices
  (such as radiator,heating installation,cooking stove or other heating device)
• Regardless of what reasons cause the unit damage ,please ask for the maintenance personnel to repair
• if you want to do the cleaning ,please turn off the unit and unplug the power cable from the outlet first
• Set the volume properly to prevent injury to the unit and your health

Correct Disposal of this product.This marking indicates that this product should not be disposed with other household wastes
throughout the EU.To prevent possible harm to the environment or human helth from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable resue of material resources.To return your used device,
please use the return and collection systems or contact the retailer where the product was purchased.
They can take this product for environmental safe recycling.

WARNING

• The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine,fire or the like
• no naked flame sources,such as lighted candles,should be placed on the apparatus
• CAUTION:Danger of explosion if battery is incorrectly replaced.Replace only with the same pr equivalent type

Package Contents

1. 8Bltdo Cube Speaker maln unitx 1
2. USB charging cable x 1
3. Aux cable x 1
4. .User’s manual x 1

Fit Models

• Apply to : all iPhone and iPad series, Smartphones, Laptop, Tablets and other Bluetooth devices.
• Work with any device with standard 3.5mm earphone Jack via the Included Aux cable for connecting, such as MP3, PSP,
Mobile phone…,etc

Outstanding Features

8Bitdo Cube Speaker is compatible with all wireless Bluetooth devices such as iPad, iPhone, Smartphones, Laptops,
Tablets and other Bluetooth devices. It is portable, wireless, hands-free.
Just place it anywhere in a room and enjoy pristine streaming audlo from your phone, computer, or other Bluetooth devices.
Bring music, movles, and all your mobile audio vibrantly to life–all in the palm of your hand.

• Go Anywhere and Go Wireless
  Easily compatible with iPhone, iPad, mobile phones, computers, tablets, or any other Bluetooth-enabled device
  Wireless working range is up to 8-12 meters, no cords, no hassle
• Calling and Conference on the Go
  With a powerful, built-in microphone, it can freas you to share clean-sounding conference calls or personal calling
  anywhere–in the office, car, at home, alone, or with a group
• Good sound system, enjoy your life
  Special speaker drive unit with woofer, amp up your Music, Movies, Games to let you experience the richest sound Built-in
  rechargeable battery, up to 6 hours of continuous play
• Crafted outlook and function design.
  AUX IN, almost work with any player.
  Sleep mode to save the battery for long time play.

Part Names

Main Unit

1. Power on/Power off
2. Volume –
3. Multi-function button (playł pausel speaker)
4. Volume +
5. USB charging port
6. Charging indicator
7. Bluetooth indicator
8. AUX IN

Basic Operation

• Power on/Power off
1. Power on : Holding power button until hearing starting sound.
2. Power off : Holding power button until hearing ending sound.
Connectlon
1. Work with phone
Power on the unit, and coming with a short Bluetooth hint sound from the unit,
the Bluetooth function is on, the blue Bluetooth indicator lights up at the same time,
these show the unit is enter pairing mode. Turm on the Bluetooth function in your phone,
and search the Bluetooth device, then, your phone will find the device named “8Bitdo Cube”,
Atone will sound to confirm the device has paired successfully.

Note: Please reference the user’s manual of your cell phone for the detalls about Bluetooth connection.

2. Work with tablet PC
Please refer to the above phone connection operation steps
3. Work with laptop/ notebook computer /PC
As the Bluetooth version for laptop/ notebook computer /PC is various, the connection methods are different as well,
if you can not connect with the unit for play on first use,
you may need to install a new version of the Bluetooth driver in your laptop in advance.
Please reference the instructions of laptop for details.

Play mode

1. Bluetooth mode: play music via Bluetooth connection
2. AUX mode: play music via AUX cable. Note: Bluetooth mode is unavailable when speaker in AUX mode.

Note: Bluetooth mode is unavailable when speaker in AUX mode.

Play the music

Play music via Bluetooth

1. Follow the steps above to pair the Bluetooth device and the unit
2. Enter in the Bluetooth device audio play menu, choose your favorite music to play
3. Press the multi-function button to pause or play your music as you need
4. Holding -/+ button to adjusting volume, press -/+ button to next/previous musi

AUX IN

1. Connect the audio device via Aux cable to the “Aux IN” port at the back of unit
2. Choose directly your favorite music in the audio device to play

Note: Next/Previous music function is unavailable at AUX IN connection

Adjusting the volume

Press the volume button on the unit or control the audio device volume directly to adjust the volume .

Note: Next/Previous music function is unavallable at AUX IN connection

Hands free function

1. The unit will play your phone ringtone when there is a incoming cal
2. At this time, press the multi-function button to answer the phone, and talk through the microphone

Charge

1. Connecting to any standard USB port Vla mlcro USB cable. (such as PC, USB power adapter…etc.)
2. The charging indicator will light up while charging
3. It will be fully charge in 2.5 hours.
4. The charging indicator working mode:
   • Red LED on : the unit is charging
   • Red LED off : the battery is fully charged

Note: if the unit is not to be used longer than 7 days, please charge the unit for 10 minutes before turn on the unit.

Technical parameters

Note: All specifications are subject to change without notice.
Product Name: 8Bitdo Cube Speaker.
Power Supply: USB 5V.
Built-in Lithium lon batteries: 3.7V 800mAh.
Output power: RMS 3W.
Bluetooth Profile Supported: A2DP, AVRCP.
Working range: up to 8-12m.
Working atmosphere: 0°C-40°C/20%-90%RH.

Maintenance

Please follow the instructions below before clear the unit

• Power off the unit first before clear
• Use a soft, dry, lint-free cloth to wipe gently
• Do not use alcohol, benzene, thinners or other chemical detergents as these can cause the casing to be
• If the unit will not be used for an extended period of time, power off the unit and place the unit with accessorles Into the package
• Do not set the unit in a damp, high temperature or the sun point-blank place

Troubleshooting

Question: Can’t pair successfully after multiple connections?

Solution

1. Check if the blue Bluetooth indicator lights on, if the indicator goes off, please slide the ON/OFF switch to “ON”,
if the blue Bluetooth indicator doesn’t light on yet, please charge the unit.
2. Perhaps there are many Bluetooth devices around the surroundings to interfere the searching, please close the
Bluetooth function in the device you don’t need
3. Power off and then power on the unit, to restart the Bluetooth function of the unit or your Bluetooth device.
4. Unplug the AUX cable from the unit, and re-palr the unit and the Bluetooth device.

Questlon: The Sound occurs staccato when play ?

Solution :

1, Make sure the working distance is in 8-12m.
2. Clear away the block between the unit and the Bluetooth device to prevent the poor connecting.
3. Please check if the unit and the Bluetooth device is in low battery,
if so, please charge the unit and your Bluetooth device

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection agalnst harmful
Interference In a residential Installation. This equipment generates uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions,may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV techniclan for help.

FCC Radlatlon Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Zero 2 Bluetooth gamepad-instruction manual

• Press start to turn on the controller
• press & hold start for 3 seconds to turn off the controller
• press & hold start for 8 seconds to force turn off the controller

Switch

1. press Y & start to turn on the controller. Blue LED blinks 4 times per cycle
2.  Press the select button for 3 seconds to enter its pairing mode. The LED starts to rapidly blink
3. go to your Switch Home Page to click on Controllers, then click on Change Grip/Order. Blue LED become: solid when the connection is successful
4. the controller will auto-reconnect to your Switch with the press of start once it has been paired

• when connected to your Switch, select + Dpad_Down = Switch HOME button, select + start = Switch ZL +ZR button

Windows (X – input)

1.  press X & start to turn on the controller. Blue LED blinks twice per cycle
2. Press the select button for 3 seconds to enter its pairing mode. The LED starts to rapidly blink
3. go to your Windows device’s Bluetooth setting, pair with [8BitDo Zero 2 gamepad]. Blue LED becomes solid when the connection is successful
4.  the controller will auto-reconnect to your Windows device with the press of start once it has been paired

• when connected to your Windows, select + Dpad_Down = HOME button

Android

1. press B & start to turn on the controller. Blue LED blinks once per cycle
2. Press the select button for 3 seconds to enter its pairing mode. The LED starts to rapidly blink go to your Android device’s Bluetooth setting, pair with [8BitDo Zero 2 gamepad]. Blue LED becomes solid when the connection is successful
3. the controller will auto-reconnect to your Android device with the press of start once it has been paired

macOS

1. press A & start to turn on the controller. Blue LED blinks 3 times per cycle
2. Press the select button for 3 seconds to enter its pairing mode. The LED starts to rapidly blink
3. go to your macOS device’s Bluetooth setting, pair with [Wireless Controller]. Blue LED becomes solid when the connection is the successful
4. the controller will auto-reconnect to your macOS device with the press of start once it has been paired

Keyboard mode

1. press R & start to turn on the controller. Blue LED blinks 5 times per cycle
2. Press the select button for 3 seconds to enter its pairing mode. The LED starts to rapidly blink
3. go to your device’s Bluetooth setting, pair with [8BitDo Zero 2 gamepad]. Blue LED becomes solid when the connection is successful
4. the controller will auto-reconnect to your device with the press of start once it has been paired

• on keyboard mode, please make sure the input language on your device is in English

battery

• built-in 180 mAh Li-ion with 8 hours of play time
• rechargeable via USB cable with 1- 2 hour charging time

power saving

• sleep mode -15 minutes with no use
• press start button to wake up the controller

support

• please visit support.8bitdo.com for further information & additional support

FAQs

What is upgraded since the original 8bitdo zero controller?

The new version can work with NIntendo Switch and its firmware can be Upgraded.
But no photographed function.

Does it have motion control ?

No, it does not have motion control .

Can the controller work via usb connected to pc?

No, you can update the frimware via usb connected.

Does it work for a ChromeOS device with bluetooth?

No, Compatible with Nintendo Switch, Windows, Android, macOS

Will it work for the nintendo switch lite?

Yes, it can work with nintendo switch lite.

Will this come in grey?

The Zero 2 only comes in pink, blue, and yellow

does this work with switch lite? for games like tsum tsum festival?

Yes

Can i pair this with my iphone to use with a vr headset?

There is a way to pair with iPhones, but it doesnt do so naturally. The Zero 2 can also be used to navigate menus

Will this work for enter the gungeon on switch?

Probably not as it only has a dpad. I wouldn’t recommend it for a twin stick shooter game like Enter the Gungeon anyway. You’d want something with a dpad and an analog stick, or two analog sticks for for that game.

What are some recommended games for it?

2D games are better fit, also Nintendo Online games

If i buy two zero 2 can i use on lite for 2 player game on mario kart 8 deluxe?

zero2 acts as a replacement for a Switch Pro in Switch Lite console. It is possible to connect two or more units. You can use these to play Mario Kart 8 with two people.

Could i use it to play Stardew valley on mobile?

Probably. Its blue tooth and you can use it to play games on your phone. It should work.

Is this compatible with iPhones (iOS)?

Yes, I played Grimvalor using it!

Does this work for lego star wars on ipad?

Some have found success with pairing the controller to iPad and iPhones, but it does not connect naturally as it is not intended to

Can you play/pause videos with this?

Well, when I bought this controller it was advertised as a compact gaming controller for the Nintendo switch. Pause and play are a must-have. So yes you can pause and play in the switch with this controller. Hope this helps.

Is there a keychain attachment for this or do you have to get one yourself?

One comes with it

Can this be attached to my keys?

Yes, you can.

Switch

• motion controls, NFC scanning, IR camera, HD rumble, notification LED are not supported, nor can the system be waken up wirelessly

2.4g connection

1. put the connection switch to 2.4G
2. turn the mode switch to S mode, LEDs start to blink
3. plug the receiver into the USB port on Switch. Arcade stick will auto-connect to the receiver
4. LEDs on both the arcade stick and receiver will become solid when the connection is successful

• Press the home button to continue to use the arcade stick when it is already on S mode
• The switch system needs to be 3.0.0 or above for a 2.4g connection. Go to System Setting > Controller and Sensors > turn on Pro Controller Wired Communication

Bluetooth connection

1.  put the connection switch to BT
2.  turn the mode switch to S mode, LEDs start to blink
3. press and hold pair button for 3 seconds to enter its pairing mode, LEDs start to rotate clockwise (this is required for the very first time only)
4. go to your Switch Home Page to click on Controllers, then click on Change Grip/Order
5.  LED becomes solid when the connection is successful

• Press the home button to continue to use the arcade stick when it is already on S mode
• arcade stick will auto-reconnect to your Switch on S mode once it has been paired

wired connection

1. turn the mode switch to S mode, LEDs start to blink
2. connect the arcade stick to your Switch dock via its USB-C cable
3. wait till the arcade stick is successfully recognized by your Switch to play

• The switch system needs to be 3.0.0 or above for a wired connection. Go to System Setting > Controller and Sensors > turn on Pro Controller Wired Communication
• LED lights indicate the player number,1 LED indicates player, 2 LEDs indicate player 2, 4 is the maximum number of players the arcade stick supports

Windows (X – input)

2.4g connection

1. put the connection switch to 2.4G
2. turn the mode switch to X mode, LEDs start to blink
3. plug the receiver into the USB port on your Windows device. Arcade stick will auto-connect to the receiver
4. LEDs on both the arcade stick and receiver will become solid when the connection is successful

• Press the home button to continue to use the arcade stick when it is already on X mode

Bluetooth connection

• required system: Windows 10 (1703) or above. Bluetooth 4.0 is supported

1. put the connection switch to BT
2. turn the mode switch to X mode, LEDs start to blink
3. press and hold pair button for 3 seconds to enter its pairing mode, LEDs start to rotate clockwise (this is required for the very first time only)
4. go to your Windows device’s Bluetooth setting, pair with 8BitDo Arcade Stick
5. LED becomes solid when the connection is successful

• Press the home button to continue to use the arcade stick when it is already on X mode
• arcade stick will auto-reconnect to Windows on X mode once it has been paired

wired connection

1. turn the mode switch to X mode, LEDs start to blink
2. connect the arcade stick to your Windows device via its USB-C cable
3. wait till the arcade stick is successfully recognized by your Windows device to play

• LED lights to indicate the player number, 1 LED indicates player 1, 2 LEDs indicate player 2, 4 is the maximum number of players the arcade stick supports

Turbo function

1. hold the button you would like to set turbo functionality to and then press the start button to activate its turbo functionality
2. LED will blink when the button with turbo functionality is pressed
3. hold the button with turbo functionality first then press the start button to deactivate its turbo functionality, LED will cease to blink

• joystick, home, select and start buttons are not included

control stick switch

1. use the control stick switch to shift the joystick function to either left joystick(LS), directional pad (DP), or right joystick (RS)

• LS: Left joystick, DP: D-pad, RS: Right joystick

customize profile

• It gives you elite control over every piece of your arcade stick: customize button mapping and create macros with any button combination
• e.g. create macros and more with P1, P2
• please visit support.8bitdo.com/ultimate-software.html for the application

battery

•  built-in 1000mAh Li-on battery with 40 hours of playtime on 2.4g connection and 30 hours on Bluetooth connection
• rechargeable with 4 hour charging time
• arcade stick turns off in 1 minute with no connection and 15 minutes with 2.4g wireless / Bluetooth connection but no use
• arcade stick stays on with the wired connection

retrieve a lost connection or connect to a new receiver

• to retrieve a lost connection or re-pair to it, please follow the steps below:

1. put the connection switch to 2.4G
2. turn the mode switch to S / X mode, LEDs start to blink
3. plug the receiver into your Switch / Windows device
4. press and hold the pair button for 3 seconds to enter its pairing mode. LEDs start to rotate clockwise
5. LED becomes solid when the connection is successful

• 2.4g receiver can only connect to one arcade stick at a time

support

• please visit support.8bitdo.com for further information and additional support

8BitDo Pro 2 Bluetooth Gamepad/Controller

Instruction

• Press & hold start for 3 seconds to turn off the controller
• Press start to turn on the controller

Switch

• NFC scanning, IR camera, HD rumble, notification LED are not supported, nor can the system be waken up wirelessly

Bluetooth connection

• Turn the mode switch to S
• Press start to turn on the controller. LED starts to rotate from left to right
• Press pair button for 3 seconds to enter its pairing mode. LED stops blinking for a short moment then starts to rotate again (this is required for the very first time only)
• Go to your Switch Home Page to click on Controllers, then click on Change Grip/0rder
• LED becomes solid when the connection is successful controller will auto reconnect to your Switch with the press of start once it has been paired

Wired connection

1. Turn the mode switch to S
2. Press start to turn on the controller. LED starts to rotate from left to right
3. Connect the controller to your Switch dock via its USB cable
4. Wait till the controller is successfully recognized by your Switch to play

• Switch system needs to be 3.0.0 or above for wired connection. Go to System Setting > Controller and Sensors> turn on Pro Controller Wired Communication
• LED lights indicate the player number,1 LED indicates player 1, 2 LEDs indicate player 2, 4 is the maximum number of players the controller supports

Windows (X – input)

Bluetooth connection

Required system: Windows 10 (1703) or above. Bluetooth 4.0 is supported

1. Turn the mode switch to X
2. Press start to turn on the controller. LEDs 1&2 start to blink
3. Press pair button for 3 seconds to enter its pairing mode. LED starts to rotate from left to right (this is required for the very first time only)
4. Go to your Windows Settings>Devices> Bluetooth&other devices> turn it on
5. Choose Add Bluetooth or other device Bluetooth
6. Pair with [8BitDo Pro 2]
7. LED becomes solid when the connection is successful

The controller will auto-reconnect to your Windows device with the press of start once it has been paired

Wired connection

1. Turn the mode switch to X
2. Press start to turn on the controller. LEDs 1 &2 starts to blink
3. Connect the controller to your Windows device via its USB cable
4. Wait till the controller is successfully recognized by your Windows device to play
5. LED lights indicate the player number, 1 LED indicates player 1,2 LEDs indicate player 2, 4 is the maximum number of players the controller supports

Android (D – input)

• Required system: Android 4.0 or above

Bluetooth connection

1. Turn the mode switch to D
2. Press start to turn on the controller. LED 1 starts to blink
3. Press pair button for 3 seconds to enter its pairing mode. LED starts to rotate from left to right (this is required for the very first time only)
4. Go to your Android device’s Bluetooth setting, pair with [8BitDo Pro 2]
5. LED becomes solid when connection is successful

Controller will auto-reconnect to your Android device with the press of start once it has been paired

Wired connection

1. Turn the mode switch to D
2. Press start to turn on the controller. LED 1 starts to blink
3. Connect the controller to your Android device via its USB cable
4. Wait till the controller is successfully recognized by your Android device to play

OTG support is required on your Android device

macOS

• Required system: 0S X Lion C10.10) or above

Bluetooth connection

1. Turn the mode switch to A
2. Press start to turn on the controller. LEDs 1 & 2 &3 start to blink
3. Press pair button for 3 seconds to enter its pairing mode. LED starts to rotate from left to right (this is required for the very first time only)
4. Go to your macOS device’s Bluetooth setting and turn it on
5. Pair with [Wireless Controller)
6. LED becomes solid when the connection is successful

• the controller will auto-reconnect to your macOS device with the press of start once it has been paired

Wired connection

1. Turn the mode switch toA
2. Press start to turn on the controller, and LEDs 1,2&3 start to blink
3. Connect the controller to your mac0S device via its USB cable
4. Wait till the controller is successfully recognized by your macOS device to play

Turbo function

1. Hold the button you would like to set turbo functionality to and then press the start button to activate its turbo functionality
2. home LED blinks continuously when the button with turbo functionality is pressed
3. Hold the button with turbo functionality then press star to deactivate its turbo functionality

• D-pad joysticks, home, select and start buttons are not included
• This does not apply to Switch mode

Battery

• 20 hours of play time with a 1000 mAh built-in battery pack
• Rechargeable with 4 hours charging time
• Replaceable with two AA batteries with 20 hours of play time
• Controller will turn off in 1 minute with no connection and 15 minutes with Bluetooth connection but no use
• Controller stays on with wired connection

Ultimate Software

• It gives you elite control over every piece of your controller: Customize button mapping, adjust stick & trigger sensitivity, vibration control and create macros with any button combination
• Please visit support.8bitdo.com/utimate-software.html for the application

support

• Please visit :support.8bitdo.com for further information & additional support

8BitDo SN30 Pro for Android User Manual

SN30 Pro for Android FAQ

• What is the difference between SN30 Pro for Android and SN30 Pro?
  • The differences are:
  • A. Different body and button colour
  • B. Motion control, rumble, Turbo function are not supported
  • C. Supports button swap function, 8BitDo Ultimate Software, and analog triggers
  • D. Works on Android only
• What systems does it work with? Does it auto reconnect to those system?
  • SN30 Pro for Android is a Bluetooth controller, it works with Android devices to play Cloud gaming with Xbox Game Pass and controller-supported Android games.
  • It auto reconnects with the press of START once it has been successfully paired.
  • * Cloud gaming with Xbox Game Pass may not be available in some countries/regions, please contact Microsoft Customer Service for details.
• Does it work with Windows?
  • You can use it on Windows 10 and Switch using the 8BitDo USB Wireless Adapter.
• Does it work with PS5, Xbox Series S/X, PS3, PS4, Xbox One, Xbox 360, Wii, Wii U?
  • No, it does not.
• How do I change the controller? How long does the battery last when fully charged?
  • We suggest you charge it via a phone power adapter and original USB cable.
  • The controller uses 480mAh rechargeable battery with 1-2 hour charging time. The battery can last up to 16 hours when fully charged.
• Does it have vibration?
  • No, it does not.
• Does the Mobile Gaming Clip fit my phone?
  • The clip is expandable to fit Min 49mm, Max 86mm smartphone