Monster Adventurer Force Bluetooth Speaker IPX7 Waterproof Speaker 5.0 with Microphone
Specifications
- CONNECTIVITY TECHNOLOGY: Bluetooth, Auxiliary, USB
- SPEAKER TYPE: Outdoor
- BRAND: Monster
- RECOMMENDED USES FOR PRODUCT: Music, Indoor, Outdoor
- SPECIAL FEATURE: Waterproof
- PRODUCT DIMENSIONS: 14 x 6.9 x 9 inches
- ITEM WEIGHT: 6.07 pounds
- BATTERIES: 1 Lithium Polymer battery
Introduction
Noel Lee and the Monster Design Team in the United States designed and developed the Pure Monster Sound-Monster Adventurer Force Bluetooth speaker. From 40 years of sound engineering experience, this album has been fine-tuned to provide the most powerful music experience conceivable. Dynamics with a lot of deep bass impact, a lot of clarity and details, and no distortion. With two full-range drivers and two passive radiators, you’ll get 40 watts of pure monster sound. The 360° surrounding sound is created by speaker drivers and passive radiators that are uniquely positioned. The Monster Adventurer Force’s stronger volume makes it excellent for any interior activities as well as outdoor speakers for adventure.
Monster Adventurer Force portable Bluetooth speaker is IPX7 certified and can resist complete immersion in water for up to 30 minutes over 3 feet. 7.4V/4000mAh built-in lithium battery that provides up to 40 hours of continuous playtime at 50% volume! The Monster Adventurer Force Wireless Speaker is a Bluetooth 5.0 speaker that can connect to practically any Bluetooth device. It remembers the last device connected, making reconnection a breeze. It has more audio options to customize your favorite tunes, including micro SD card/USB input/AUX input/microphone input, as well as micro SD card/USB input/AUX input/microphone input. This item does not come with a microphone.
WHAT YOU GET
MONSTER Adventurer Force Bluetooth Speaker*1, AUX cable*1, Quick Start Guide*1, USB-C charging cable*1, 12 month Worry-Free Service
HOW TO PAIR
If a Bluetooth device is already linked, press and hold the Bluetooth button for around 3 seconds to detach it before pairing another device. If the speaker is not connected to any Bluetooth device, it will automatically enter pairing mode.
HOW TO CHARGE
Connect up to two devices to the 5V/2.1A USB ports on the speaker to charge them using the speaker’s internal battery.
HOW TO FIX BLUETOOTH PAIRING
- Check to see if Bluetooth is turned on.
- Determine the pairing method your device uses.
- Activate the discoverable mode….
- Ascertain that the two devices are in close proximity to one another.
- Turn the devices off and on again.
- Delete any existing Bluetooth connections.
Frequently Asked Questions
- What is the best way to tell if my Bluetooth speaker is completely charged?
If the battery is fully charged, the CHARGE indicator will not light up. The CHARGE indicator may not light up while charging the speaker with the power turned on, depending on the model. The CHARGE indicator will light up if the battery is being charged when the speaker is switched off. - Why won’t my monster speaker pair with my Bluetooth device?
To broadcast through bluetooth, the Monster Soundstage S2 requires the usage of a USB dongle. Check that the dongle is plugged in; if it still doesn’t work, try a different dongle. If the issue persists, the USB port is defective and needs to be replaced. - Is Monster a reputable speaker manufacturer?
Monster may be the name for you if you’re a music lover looking for a high-quality Bluetooth speaker for your home. They’re known for producing tough speakers with excellent audio quality and a full tone. - When the monster speaker is fully charged, how do you know?
When the light turns off, the unit is fully charged. - How long does it take to charge a Bluetooth speaker?
Speakers powered using AC mains power will take approximately 6-8 hours to completely charge. Speakers that are charged by USB take about 3-4 hours to fully charge. - Is it possible to replace the battery in a BLUETOOTH speaker?
Turn the Bluetooth speaker upside down, pull off the anti-slip mat, locate the maintained screw, remove and unscrew it, and then heat and remove the battery from the audio motherboard with a soldering iron. - What is the procedure for resetting a Bluetooth speaker?
You should only have to do this for a few seconds with most Bluetooth speakers. Pressing and holding the power and Bluetooth buttons at the same time can cause the speaker to reset on almost any Bluetooth speaker. - Why aren’t my speakers producing any sound?
Make sure the speaker connections are secure. Examine the wires on the back of your speaker and double-check that they are plugged in correctly. If any of these connections are loose, re-plug them to ensure that the connection is secure. It’s possible that your speaker isn’t working because of a loose connection. - Why isn’t my Bluetooth device working?
Navigate to Menu> Settings > Bluetooth from your Android’s home screen. Toggle the Bluetooth switch to the “on” position. Tick the box that allows your Bluetooth device to be discovered under the available settings. Connect to the device you’re trying to connect to by turning on your Bluetooth function. - Why is there no sound coming from my Bluetooth device?
This may seem self-evident, but on Android devices, volume levels are divided into groups. Ringtone, Media, Notifications, and System are among them. It’s possible that you’re pressing the volume rocker and it’s setting the wrong volume level.
