Apps REXTON App

INSTALLING THE APP

1. Tap the “Install” button in the app store and then tap “Open”.
   
2. Check the box to accept “terms and conditions”.
   
3. Select a connection option:
   a. TeleCare*: this option allows future remote programming by your dispenser. Works with Bluetooth and non-BT.
   * You’ll need to grant access to microphone and camera to communicate with your dispenser.
   
   b. The QR code transfers hearing aid information to the app. Works with Bluetooth and non-BT.
   
   c. Bluetooth transfers all hearing aid data to the app including battery status. Works only with Bluetooth hearing aids.
   
   d. The Manual option is used with non-Bluetooth hearing aids if you don’t have a 6 digit code or QR code.
   
4. Check the box to accept the terms of use for TeleCare.
   
5. Enter the 6-digit code provided by your dispenser.
   
6. Tap “Proceed” to agree to communication with your dispenser while using TeleCare.
   
7. Tap “Allow” to record audio. This will allow you to use the phone function in the app while using TeleCare.
   
8. Tap “Allow” to take pictures and record video. This will allow you to use the video conference function in the app while using TeleCare.
   
9. Tap “Proceed” to scan for Bluetooth devices. You may revoke this permission later as location services are not required to use the app.
   
10. Verify that your phone is in the recommended phones list.
    
11. Follow the on-screen instructions to pair your hearing aids with the app. Tap “Ok”.
    
12. Tap the name of your hearing aids when displayed.
    
13. Tap “Let’s go” when the “Connection successful” message appears.
    

APP OVERVIEW

APP FEATURES

Programs (Fig. 1 & 2):
Tap the program name to see and select from all available hearing programs.

Volume (Fig. 3):
Select the Volume control screen to use the slider to raise or lower the volume of your hearing aids.

Sound Balance (Fig. 4):
Select the Sound Balance screen to use the slider to raise or lower the volume of high frequency sounds.

Streaming (Fig. 5):
This screens shows whether you are connected to a streaming device or not and the type of device connected (iOS, Smart Mic, etc.)
Tap Connect to Smart Transmitter 2.4 to engage a previously paired transmitter.

Connect to Smart Transmitter 2.4 (Fig. 6):
When the Smart Transmitter 2.4 is engaged, you may change the volume of streaming signal with the slider.
Tap the Disconnect button to disengage the Smart Transmitter 2.4.

Directional hearing (Fig. 7 & 8):
You may change the directionality of your hearing aids in this screen.

1. Tap one of the four quadrants to point the hearing aids’ microphones in that direction. The top of the screen is to the front.
2. If front directionality is selected, use the sliders to narrow or widen the directional focus.
3. Tap the center figure to hear all sounds around you equally.
4. Tap the Auto button to return to automatic function.

Hearing lessons (Fig. 9):
Tap the three horizontal lines on the upper left side of the app and tap Hearing Lessons.
These are designed to help you get the most benefit from your hearing aids by guiding you through several exercises.

Professional (Fig. 10):
Tap the three horizontal lines on the upper left side of the app and tap Professional.

1. Send text messages to your dispenser regarding your hearing aids
2. Apply the TeleCare changes your dispenser sent to your hearing aids.

Satisfaction (Fig. 11):
Tap the three horizontal lines on the upper left side of the app and tap Professional.
Tap the face that best describes your satisfaction level that day.
This information is sent to your dispenser via TeleCare and may be used to improve your experience if needed.

Settings Menu (Fig. 12):
Tap the three horizontal lines on the upper left side of the app and tap Settings.

Hearing Aid Settings (Fig. 13)

1. Low Battery Interval: you may choose the frequency of the alerts when your hearing aids’ batteries are running low.
2. Power-On-Delay: you may choose the time the hearing aids take to turn on after being removed from the charger or closing the battery door.
3. Use motion sensor: utilizes your movement to change directionality and noise reduction.
4. Bluetooth mode: turns off Bluetooth in the app, not on the cell phone.

App Settings (Fig. 14):

1. Set up the app: select if you want to go through the app pairing process.
2. Connect to TeleCare: this option is available if TeleCare was not selected as the connection option during setup.
3. Language: you may choose 1 of 21 language options.
4. Usage statistics: enable if you want to help Rexton with app improvements.
5. Rate the app: let us know how the ap is working for you.

Help (Fig. 15):
Connect with Rexton via e-mail.

Versions (Fig. 16):
Displays your app and firmware version. This information is important when communicating any malfunction to your dispense

Imprint (Fig. 17):
Here you can read the legal information regarding the app and its use.

ADDING TELECARE

Adding TeleCare after App Installation (Fig. 18 – 23)

1. Tap the three horizontal lines on the upper left side of the app
2. Tap App settings.
   
3. Tap Connect to TeleCare.
   
4. Check the box to agree to Terms of use for TeleCare.
   
5. Enter the 6-digit code your dispenser provided.
   
6. Tap Ok to provide access to your phone’s microphone.
   This is required to use the phone function of the app to communicate with your dispenser if using TeleCare Remote Session.*
   
7. Tap Ok to provide access to your phone’s camera.
   This is required to use the video conferencing function of the app to communicate with your dispenser if using TeleCare Remote Session.*
   

*Available only with Bluetooth enabled hearing aids.

It’s a tough world out there, and even tougher when your hearing starts to go. At Rexton, we won’t let hearing loss hold you back. Good hearing is critical: From getting the job done, to getting home safely and being there for the people who count on you, we know what’s at stake. That’s why we work hard to deliver proven hearing technology in the most reliable way. We understand what reliability means in real life, and make practical, easy-to-use products you can count on. Our hearing aids have been getting the job done since 1955, so whatever life throws at you, you can rely on Rexton

Sivantos GmbH
Henri-Dunant-Straße 100
91058 Erlangen, Germany
www.rexton.com

The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sivantos GmbH is under license. Other trademarks and trade names are those of their respective owners. Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Google Play is a trademark of Google Inc. “Made for iPhone” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPhone or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
Please note that the use of this accessory with iPhone or iPad may affect wireless performance. iPad, iPhone are trademarks of Apple Inc., registered in the U.S. and other countries.

Home Screen

Group Manage

Make sure your phone or device is successfully connected with the RGB LED Light.

Shake Selection
The shake feature will randomly select a color everytime you shake your phone.

Modify Pin Sequence

1. Select to set up a new color setting.
2. Click to save on when selection is completed.

RGB Value Setup

1. Click to open the interface of the RGB Value Setup.
2. Slide the R – G – B progress bar to change the RGB value.
3. Or press the button minus ‘-‘ or plus ‘+’ to change the RGB value.
4. Click ‘Cancel’ or ‘OK’ when setup completed.

Style
This Style Interface has a variety of functions, including Static colors, Color Jumping Change, Color Cross Fade and etc. Below is a slider progress bar that will adjust the rate in which the selected function will operate at.

Music

Select the Music mode to play music with the RGB LED Light. The brightness and colors will randomly changed base on the music.

A Thank you for purchasing our products; your satisfaction is very important to us. If you have any questions regarding this product, please feel free to contact us. This Lotus Lantern App allows you to interact, customized and control your RGB LED Light. Using bluetooth wireless technology change the colors and brightness of your RGB LED Light all from your smart phone. Additionally, take advantage of our schedule, music to light sync, shake to random colors and other features that are continously introduced.

Note:
Before instllation of this App – Lotus Lantern, please check with your phone or device and make sure which operation system is Android 4.3 or iOS 9.0 above. Remote control range distance is within 1 O meters.

Step 1:
After installing your RGB LED Light, download & install ‘Lotus Lantern’ from Apple Store or Google Play Store or scan the QR code below.

Step 2:
Once installed turn ON your phone’s bluetooth and open the ‘Lotus Lantern’ App. 

Phone MIC

Voice control and music are also options that are able to be selected to alter the characteristics of the RGB LED Light, adjusting the brightness in sync with the volume of the selected audio input from Phone or External MIC.

 External MIC

Schedule
This Schedule Interface will allow you to set alarms that once reached will turn the RGB LED Light on or off. To set a specific run period just set a time to switch on and a separate time after which will turn the off.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FAQS

What are the LED lights from TikTok?

TikTok lights are any fixtures that personalities on the app use for enhanced video lighting. They can help minimize shadows, add special effects, or showcase certain items.

What are the LED lights on TikTok called?

The most popular ones on TikTok are none other than the RGB and dreamcolor LED strip lights. You can adjust them to different colors however you want based on personal preferences. The dream color LED strip light can also make a strip light display multiple color effects at the same time.

What are the lights influencers use?

Ring lights have been referred to as ‘glamour’ or ‘beauty lights’ for this very reason. It makes the subject appear with an almost artificial perfection, perfect for influencers and beauty bloggers alike.

What DJ app works with Spotify 2022?

The Mixonset AI DJ app works with Spotify, SoundCloud Free, Apple Music or Tidal. It’s easy and seamless – your Spotify DJ app can start a party just for you wherever you go.

What app do DJs use to mix music?

Pacemaker provides an easy to use DJ app for all DJs and gives you instant access to millions of tracks and a simple sync to your Spotify and Apple Music playlists. You can create mixes by selecting track by track or simply pick a playlist and let our AI DJ (Automix) create a perfect seamless mix for you.

Can you sync lights with music?

Mac/PC: In the Hue Sync app, pick an entertainment area and go to Music > choose palette and intensity > Start Light Sync and start music. Android/iOS: In Hue, go to Sync > link your Spotify account > choose the Entertainment Area > Open Spotify App and play music. Alternatively, use a controller and light sequencer.

What is magic light app?

This app allows you to control smart LED lights over Bluetooth or Wifi, including support for setting RGB color, warm white, and built in color functions. It also allows you to create a simple program for turning the lights on and off automatically.

What is the viral lights app called?

The Viral Light – LED Strip Controller App is available on the Play store for FREE. Now, you have access to multiple colour options, which you can use to control your room and car lighting as per your mood and reference.

What is Lotus lantern APP?

Description. Lotus Lantern BLE 4.0 is an intelligent APP to control RGB(W) LED strip. It can adjust the brightness and color of LED strip, also has the music and microphone rhythm function, and build in many transition patterns of color and brightness.

Can LED lights be used as listening devices?

There are cases when a LED light can spy by covertly listening and then send that audio over 300 meters away to the eavesdropper

How do TikTok lights work?

The TikTok lights are LED strip lights that come in a wheel that you can unravel. From there you can take them and stick them on anything: your ceiling, walls, bed, closet, even outdoors. Then, using a remote, you can change the color, the speed, or even a cool fade with multiple shades.

How do you get TikTok lights?

The light is more flattering than direct sunlight because it’s diffused (it goes through the glass, this way there’s a bit less light on you. Put your phone on the window and film yourself while facing outside. As a result, there will be clean and beautiful light on your face and body.

Will Spotify allow DJ apps?

Spotify was supposed to cut support for most DJ apps in July 2020. Currently, just a few DJ software still works with Spotify in 2022. If the above Spotify DJ software doesn’t meet your requirement, you’re suggested to download Spotify songs to local computer drive by using the NoteBurner Spotify music recorder.

Are there any free DJ apps?

It can be used across multiple platforms including iOS, Android, Mac and Windows and allows beat-matches to spin tracks straight from Spotify and iTunes.

Do my LED lights play music through it?

LED lights with music can change in color – and other effects – based on the music you’re playing. These lights do not play their own music or act as speakers. Instead, they include microphones that transmit sound to the light, which includes smart technology that reacts to the music.

What is the use of magic app?

magicApp gives you the flexibility and excellent call quality directly from your smartphone. Any existing magicJack customer with a compatible iOS or Android device can access the magicApp. To get started: Simply download the app from the iTunes store or Google Play store.

Apps HDWifiCamPro App for Android

Product and accessories

1. Camera
2. Power adapter
3. Mounting bracket
4. Quick start guide
5. Disc

Start to use

• Hardware installation
• Connect to camera AP
• Add camera
• Get real-time video, point-to-point usage .Configure camera WIFI
• Connect to router
• Configure camera WIFI
• Turn off camera AP, WIFI viewing

Mobile phone App installation

1. Download and install HDWifiCamPro from Apple Store for IOS, and search on GooglePlay for Android. For easy installation, please scan the below QR code to download and install HDWifiCamPro. If your device fails to connect to GooglePlay, please scan the below APK QR code for download and installation.
   Note: It is recommended to use the QR code scanning software that comes with your browser or a third party to scan and download App. Direct download and installation of App files is not supported by WeChat scan.
   
   
2. Click “+” to add a new camera. Click and add the connected camera, enter the page for adding the camera, fill in the UID or password to add the camera. Note: when using the camera for the first me, please refer to “set up the camera to connect to the WIFI network” section on the instruction to set up the camera to connect to your router before adding the camera.
   
3. There are two ways to quickly enter the camera UID: A. Scan the QR code on the camera; B. Search the camera through the local network.
   
4. Fill in the camera name and the P2P password. The default P2P password is 6666. Confirm and click Ok. Camera is added successfully. It is recommended to
   modify the P2P access password after setting up the camera.
   
5. After the camera is showed online, then click the camera you just added to watch the real-time video. You can control the device in the video interface.
   
6. Icons and buttons for video pages.
   

   Camera platform control	By PAN/TILT with your fingers on the video page, you can control the rotator of the camera platform, which depends on the sliding distance of your finger (need to purchase camera for support).
   	Users can hear the camera sound and have two-way voice intercom (need to purchase camera for support).
   	Take snapshots and record video files
   	Flip images vertically and horizontally
   	Adjust brightness and contrast, tune intercom sound
   	Watch videos in the SD card

7. Other features of the page.
   

   	Watch the current real-�me video
   	View screenshots taken by the camera
   	View video files for your mobile device
   	View camera alarm event record

Camera setting

1. Click the gear button at the back to open the advanced configuration page of the camera.
   
2. Modify the WIFI connection. Select WIFI Settings and the camera will show the available Wi-Fi hotspots. Select your Wi-Fi network name (SSID), enter the Wi-Fi password and press the finish key to connect.
   Note: After saving, if the camera is connected to WIFI, the camera will disconnect the current connection to try a new WIFI network, which will cause the camera in the App to be temporarily offline for about 1 minute.
   
3. SD card video recording setting: Set the mode and the screen size of SD card video recording.
   

Connect the camera to the Wi-Fi wireless network

For a new camera or the camera you install to a new location, please reset the camera to default settings (press and hold the camera reset button for more
than 5 seconds after the camera starts), and turn on AP mode after the camera restarts. The WIFI indicator light flashes slowly (once every 3 seconds). Then
turn on the phone settings, connect the phone to the camera’s AP hotspot (the WIFI network is named after the camera UID), and wait for the phone to switch
to the camera’s WIFI network before starting App.

1. Connect the phone to the camera’s AP hotspot (the WIFI network is named after the camera UID), and wait for the phone to switch to the camera’s WIFI network before starting App.
2.  Select to add camera “+” in App
3. Select to connect the camera to the WIFI network.
   
4. Click the WIFI configuration, and then verify that the displayed WIFI network name is the same as the UID number of the device. Then return to APP, the
   device will be added automatically.
   
5. Then click the camera configuration page and click Wi-Fi Settings, select the router hotspot to be configured and enter the correct WIFI password, waiting for the camera to get online.
   Note: if the App always fails, try to check the following:
   •  Camera indicator light does not flash slowly and AP is not turned on before you start configuring WIFI.
   •  If the phone fails to connect to camera AP, you need to configure the phone to connect to the AP hotspot of the camera.
   •  Support ordinary routers. But public routers requiring login page authentication are not supported.
   • Make sure there are no errors in network name, network password and UID when configuring.
   • WIFI names and passwords in Chinese are not supported at this moment.
   • 5G WIFI signal is not supported.
   • Check whether the WIFI indicator light is always on, if yes, it means that the camera networking is successful, please add an online camera directly, App may not detect a successful camera configuration due to network shielding.
   • If WIFI is WEP encryption mode, change to WPA mode.

P2P mode viewing

You can view videos directly and operate on the camera without a WIFI router.
Steps:

1. Reset the camera and wait for the camera to restart and turn on AP mode.
2. After the camera is started, you can find the same WIFI network as the camera UID on the WIFI setting page of the phone, without encryption.
3.  Connect your phone to the WIFI network and wait for the icon of successful WIFI signal connection.
4. Same as router mode, add an online camera directly and you can turn it on for normal use. If you have already added a camera, then you can connect directly.
   
5. After the connection is successful, open and view the videos.
   

FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant t to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different f rom that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired . operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

FAQS

Why the search tool is unable to detect the camera?

Please make sure if the network connection is good, turn off the firewall and security software, and make sure the camera is connected to the router.

Why does the camera always require a user name and password, or an incorrect user?

The default password for the camera is 6666. If you forget your user name or password, you can resume the camera to the default settings to get the
default user name and password.

How can I resume my camera to default settings?

Please press the reset button on the camera for about 5 seconds until the camera restarts.

Why the image is blurred?

Remove the protective film of the lens. If it is still not clear, rotate the camera lens and focus it so that you can get a clear image after focusing.

How do you use HdWifiCamPro?

Open the smartphone Wi-Fi settings and connect to the device’s wireless signal named DGK-xxxxxx. When connection is established (keep Wi-Fi connection if prompted) open the app. The camera should automatically connect and display as online. You will also be prompted to connect the device to your local Wi-Fi.

What is HdWifiCamPro?

HdWifiCamPro is a P2P video transmission software, which supports audio, local photography and local video recording.

Why is camera offline?

There are several reasons why your camera may be offline, including a depleted battery, high bandwidth usage, updated router settings, or wireless interference. The camera is designed to automatically re-connect once there is internet available.

Why is my p2p camera offline?

If the p2p shows offline probably the system is unable to connect to the server. In this case, the best thing to do is to setup port forwarding and add the camera on the app using IP/Domain method.

Why are my security cameras not working?

Reboot the device. Rebooting your security camera will release its cache to flush, re-calibrate the settings, and revise connections. Directly unplug the security camera from its power supply then wait for a few seconds before plugging it again. This will reboot it.

Why are my security cameras black?

Loss of power is the most common reason why security cameras go black. It happens when power adapter is disconnected and cable that connect the camera to the recorder and monitor becomes loose and faulty. To fix the issue, we recommend that you check any point of contact on your camera, recorder, and monitor.

Can wireless camera work without internet?

The answer is yes, wireless cameras can work without the internet, but you won’t be able to access all of their features. Of course, whether or not the camera will work without the internet depends on the type of camera, how it was set up, and how it stores video.

What happens if you unplug a security camera?

When your house, the cameras won’t record. When you are away from the home, the cameras record. They’ll still be “working” but not recording.

Why won’t my ip camera connect?

For many times the IP camera won’t connect to WiFi or failed to log in only because of the password. Make sure the WiFi login password is correct. Sometimes you get many passwords and you may mix them up. Check the password list and ensure the password you enter is the right one of the WiFi.

How long does a security camera last?

Generally speaking, cameras will last anywhere from 5 years on up, keeping in mind the technology is only 20 years old. According to Security-Net, a new, current IP camera should last 2 NVR cycles. An NVR cycle is typically between 3-5 years.

How does a wireless camera work?

Wireless cameras work by transmitting the camera’s video through a radio (RF) transmitter. The video is sent to a receiver that is connected to a built-in storage device or through cloud storage. Through your monitor or receiver, you’ll have an easy link to access all of your image or video clips.

Why does my CCTV say no signal?

A CCTV test monitor is extremely helpful when troubleshooting camera video issues. One of the most common problems when a camera is not displaying video is a bad cable or BNC connection. Using a test monitor, you can temporarily eliminate the power and video cable that your camera is using.

Why is my security camera Green?

A solid green light on a security camera means there is both a local network and an internet connection.

How far will wireless cameras work?

Wireless security camera systems work well as long as the signal from the cameras to the central hub is clear and uninterrupted. Within the home, wireless systems usually have a range of about 150 feet or less.

How can we find hidden camera?

Check for any unusual objects in the room. Turn off the Lights in Your Room to Spot Hidden Night Vision Cameras. Use Your Mobile Phones to Locate Hidden CCTV Surveillance Cameras. Use a Professional Camera Detector or Sensor to Spot Hidden CCTV Cameras.

Apps

CloudEdge APP Instructions

DOWNLOAD THE APP

Download and install the ‘ CloudEdge App from Google Play”‘ or the App Storer””. The App is also available by scanning the QR codes on the right, using your QR code scanner on your smartphone.
NOTE:
To be able to receive notifications properly, it is important to allow all notifications and permission requested by your CloudEdge App.

	https://itunes.apple.com/app/id1294635090?mt=8	https://play.google.com/store/apps/details?id=com.cloudedge.smarteye

WI-FI SET UP

Before you start the Wi-Fi configuration, please note below:

1. The doorbell works with 2.4 GHz Wi-Fi, but not with 5 GHz Wi-Fi.
2. Avoid using special characters or symbols like )(@-!#$%^&*. , either in your Wi-Fi name a password.
3. Perform the configuration near your Wi-Fi router. Launch the ‘CloudEdge’ App and register an account with your mobile phone number or email ID. Start the Wi-Fi configuration, following the in-App instructions or referring to the following guiding steps.

GUIDING STEPS:

RUN A TEST

After setup, tap on the live view window in the App for a test. Then take your doorbell outside to the installation spot and run a test there. Make sure the installation spot is covered by a strong 2.4 GHz Wi-Fi signal.
NOTE: If the video quality from the doorbell outside is not as good as it was indoors, you may need to move your router closer to your installation spot, or invest in a Wi-Fi extender.

LIVE VIEWING,

NOTE:
Live viewing will not trigger video recording.

PLAYBACK

If the Micro-SD card is properly installed, you can playback the video clips taken after detected motions or visitor calls. (Live viewing will not trigger device recording). You can also back up video clips to the cloud, only if you have activated the cloud storage service (7-Days-Free Trial available).

LEAVE VOICE MESSAGES

Maximum 3 voice messages (Max. 10 seconds each) can be pre-recorded into the doorbell, which enables you to quickly respond to your visitors when you are not convenient to answer the doorbell call. STEPS: Setting –> Voice Message –> Press and hold this icon to record voice messages –> Push the doorbell button–> Play the selected voice message in reply to the doorbell call.

SHARE YOUR DEVICE

SHARING MY ACCOUNT SEARCHING STEPS:
Settings>> > >Tap on “Add “»Tap on “Account”»Type in account ID»Confirm Sharing.

SHARING BY QR CODE SCANNING
The new users can show their OR codes to the administrator, and share devices by QR Code scanning. FIND YOUR OR CODE: Run CloudEdge App » Tap on ” ” » “User Name” » “My QR Code” » Let the administrator scan your QR Code

NOTE:

1. Guide your family members to download and install the CloudEdge App, and register an account prior to device-sharing.
2. There is no limitation on the number of users sharing one device.
3. Only the administrator got access to the setting menu. Other users can only live view & playback.
4. All users will receive doorbell calls and alarm notifications.
5. Many users can access to the doorbell simul -tenuously, to live view or playback.

CHIME SETTINGS

You can enter into the chime setting page following below setting steps, so as to mute the Chime Reminder, select ringtones, adjust chime volume or unbind the connection with the doorbell.

NOTE:

1. Your doorbell communicates with the chime via Radio Frequency, but not WiFi. You can even do the pairing prior to the doorbell configuration.
2. You can add many chimes to one doorbell, and vice versa.
3. Press and hold the RESET button on the chime for 5 seconds till the indicator flashes blue 3 times, and you can also release the connection between the chime and its connected doorbell.

Apps Smart Wristband 3 App Heart Rate Edition

Warning

Please consult your doctor before starting a new exercise program. Although the smart watch can monitor your heart rate, it can’t be used for any medical purpose. It is designed to help people live healthier lives. Please remember to consult your doctor before starting any exercise and diet plan.

Device requirements

This product supports devices with iOS 9.0, Android 4.4 and above, and Bluetooth 4.0. Android 6.0 and above devices need to open the GPS permission to use.

Charging

In order to ensure good charging contact, please keep the metal contact free of dirt, oxidation and impurities. if the device is idle for a long time, please remember to recharge at least once a month.

a. Please align the magnetic absorption line with the metal sheet of the bottom shell, and the magnet will automatically charge the positive and negative electrodes.
b. Please ensure that the charging contact is free of dirt and impurities. If there is, please wipe it clean to avoid affecting the charging.
c. Plug the USB into the SVS00MA charging stand, and it can be fully charged in 2-3 hours.

How to connect smart watch with mobile phone

4.1 Power on: charge or press the smart watch side button for 3 seconds.
4.2 Install APP: Scan QR code through mobile phone, or search “Smart Wristband 3” APP in Apple store, Google store and APP store to download and install.

4.3 Connect smart watch through mobile APP: First, put the smart watch close to the mobile phone, and then turn on the Bluetooth and GPS of the mobile phone according to the APP connection guide. Then search the APP for the smart watch. The Bluetooth name is “Smart Watch”. Click the smart watch to connect. Set personal information according to APP prompts, and allow APP to obtain mobile location authority to complete the connection.
4.3.1 Apple device connection: After the smart watch and Apple App are connected for the first time, the “Bluetooth pairing request” will be prompted. Please click “Pair” to complete the connection. After pairing, it is allowed to display a notice to check whether the Bluetooth settings are connected. Then enter the system to check whether the sharing notice is turned on, and then the smart watch can receive from 105 system push calls, SMS, QQ, WeChat and other notification reminders, otherwise can not receive the reminders.
4.3.2 Android device connection: When connecting with Android system, you need to open the APP background operation permission in the mobile phone manager or system settings (please open the options such as self-start, high power consumption, white list, etc., otherwise the APP will be cleared by the system, and the connection with the smart watch will be disconnected. For details, please refer to the help background operation solution). The message reminder needs to open the right to use the notice according to the information in the main interface. Please only check the smart wristband 3 app to get the message reminder.
4.4 Unbind:
Unbind Android device: Click unbind on the app device to unbind the smart watch and the APP.
Unbind Apple device :Click unbind on the app device to unbind the smart watch and the APP. Enter the mobile phone settings-Bluetooth, Click the exclamation mark behind the Smart Watch, and select ignore this device in the pop-up dialog box to Disconnect the smart watch completely. After unbinding, the smart watch will no longer receive any information notifications and content pushed by Apple.

Precautions

1. In theory, the smart watch supports operating system i0S9.0, Android4.4 or above and Bluetooth 4.0 devices, but not all mobile device models. Please refer to the actual conditions for details.
2. The product is charged with SVSOOMA. It is strictly forbidden to use the overvoltage load power supply to avoid hardware damage.
3. The smart watch battery is built-in and cannot be removed. Please do not try to replace the battery.
4. The operating environment of the wristband is O’C to 45’C ;Charging temperature: O’C to 45’C.
5. Please note when wearing: if you are sensitive skin or wearing the wristband too tightly, you may feel uncomfortable.
6. Please wipe the smart watch dry before charging. Otherwise, it will lead to failure or corrosion of charging contact point.

Setting the APP

Step1:
Scan the QR Code or search Smart Life or ” Tuya Smart” on App store or Google Play to download and install the APP for iOS / Android. The mobile phone system version needs to be Android 5.0 and iOS 9.0 or above.

Step 2:
Run the “Smart Life “or “Tuya Smart “app on your phone, then tap “sign up” to create an account with Email address (if you already had one, please log in), and verify your account with a verification code that has sent to your email.
Step 3:
Log in to your account and follow the App instructions to create a “Family” and later follow the below instructions to add devices to your “Family”.

Bluetooth Configuration

Step 1:
Before connecting, please make sure your smartphone is connecting with your home Wi-Fi(2.4GHz) successfully and enable the Bluetooth feature.
Step 2:
To Connect in Bluetooth mode, the strip lights need to be set to blink rapidly. (You can learn the detailed instruction on How to set the light a rapidly flashing section).
Step 3:
Open the APP and click “+” to add a device, then tap “Auto Scan”
Step 4:
Follow the in-app instructions to connect the strip lights to your Wi-Fi network, Please note the device only works at 2.4GHz Wi-Fi.
Step 5:
Once Connected, the APP will prompt the connection. Then Click “Completed”.
Step 6:
Now you can control the lights through the APP

Quick Mode Configuration(EZ mode)

1. Before connecting, please make sure your smartphone is connecting with your home Wi-Fi (2.4GHz) successfully.
2. To connect in EZ mode, the strip lights need to be set to blink rapidly. (You can learn the detailed instruction on How to set the light in a rapidly flashing section).
3. Open APP and click “+” to add device.
4. Follow the in-APP instructions to connect the strip lights to your Wi-Fi network, Please note the device only works at 2.4GHz Wi-Fi.
5. 0nce connected, the APP will prompt the connection. Then click “Completed”.
6. Now you can control the lights through the APP.

AP (Access Point) Mode Configuration

1. Before connecting, please make sure your smartphone is connecting with your home Wi-Fi (2.4GHz) successfully.
2. To connect in AP mode, the strip lights needs to be set to blinks Slowly. (You can learn the detailed instruction on the” How to set light as slowly flashing”section)
   
3. Click the ICON “+” at the top right corner of the APP.
4. Select device type and click AP mode to add a device.
5. Go to the Wi-Fi setting in your smartphone and select the”Smart Life-XXX” for your Wi-Fi.
6. Once connected successfully, the APP will prompt the connection, and click “Completed”

How to set the light as rapidly flashing

Method 1
Step 1 Power on device Step 2 Turn off(>5s)-on(<5s)-off(>5s)-on(<5s)-off(>5s)-on Step 3 Confirm LED light is now rapidly flashing
Method 2 (If your control box has a button)
Step 1 Power on the device Step 2 Hold the power button for 5S Step 3 Confirm the LED light is now rapidly flashing
Method 3
Step 1 Power on the device Step 2 Press the ON or ON/OFF button on the remote for 5 seconds Step 3 Confirm the LED light now rapidly flashing.

How to set light as slowly flashing

Method 1
Step 1 Power on device Step 2 Turn off(>5s)-on(<5s)-off(>5s)-on(<5s)-off(>5s)-on Step 3 Confirm LED light is now rapidly flashing Step 4 Operate again: Turn off(>5s)-on(<5s)-off(>5s)-on(<5s) -off(>5s)-on until light is slowly flashing.
Method 2 (If your control box has a button)
Step 1 Power on the device.
Step 2 Hold the power button for 5 seconds
Step 3 Confirm the LED light now rapidly flashing.
Step 4 Operate again: Hold the power button for 5 seconds until the light is slowly flashing.
Method 3
Step 1 Power on the device.
Step 2 Press the ON or ON/OFF button on the remote for 5 seconds
Step 3 Confirm LED light now rapidly flashing.
Step 4 Operate again: Press the ON or ON/OFF button on the remote for 5 seconds until the light is slowly flashing.
How to connect lights to AmazonAlexa / Google Assistant
You can learn the detailed instruction on “Me->More Services” page of the APP. Tap the corresponding service to learn moreand how to set up.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body.

Apps Yi IoT App

Smart  Camera Instruction

• Download Yi loT app
• Sign up and log in

How to add a camera

How to connect with Wi-fi

If you don’t hear the sequence, please press the “RESET” on the device. Continue for more than 5 seconds, until you heard the sequence, that means the reset is successful.Note

•  5CHz wireless band is not supported;
•  Please turn on the location of phone

QR code

The QR code that appears on the mobile phone is Scanned against the camera lens and the device emits a prompt sound “QR code scan successful” and “WiFi connected’, click Next, and wait for the network configuration to be completed.

HOW TO  USE THE APP

CLOUD STORAGE

Common problem

• Q: The camera is offine or offine
  •  Check if the power supply is working properly
  •  Power off and restart the device to reconnect to the network
  •  The signal coverage is weak
  •  Signal interference shielding in special places
• Q:How does the camera store video
  •  The camera supports the F32 format with a maximum capacity of 64G. After the card is recognized, it automatically records, and when the storage s full, it automaticaly overwrites the original recording and loops recording: Support opening cloud storage service to store video;

Special statement

• The product is subject to the actual product, the instruction manual is for reference only
• Mobile phone app and device firmware version support update, users can upgrade through the app.
• The manual may contain technical descriptions or inconsistencies with product functions or typographical errors. Please understand, please refer to the final interpretation of our company.
• Do not install the product in a place where it is damp. dusty. high temperature, flammable or explosive and out of reach of children.

FCC Warning

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions

•  this device may not cause harmful interference, and
• this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radia/TV technician for help.

Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.

SPECIFICATION

FAQS

What is the radiation exposure statement?

The radiation exposure statement emphasizes that the equipment should be installed and operated with a minimum distance of 20cm between the radiator and the user’s body. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

What is the FCC warning?

The FCC warning states that this device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: this device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation.

What are some special statements regarding the use of the product?

Some special statements regarding the use of the product include not installing the product in a place where it is damp, dusty, high temperature, flammable or explosive and out of reach of children. The manual may contain technical descriptions or inconsistencies with product functions or typographical errors. Please refer to the final interpretation of our company.

How does the camera store video?

The camera supports the F32 format with a maximum capacity of 64G. After the card is recognized, it automatically records, and when the storage is full, it automatically overwrites the original recording and loops recording. You can also open cloud storage service to store video.

What should I do if my camera is offline or not working properly?

If your camera is offline or not working properly, check if the power supply is working properly. Power off and restart the device to reconnect to the network. The signal coverage may be weak or there may be signal interference shielding in special places.

How do I connect my camera to Wi-Fi?

To connect your camera to Wi-Fi, follow the instructions provided in the Yi IoT app. Make sure that your Wi-Fi network is working properly and that you have entered the correct password.

How do I add a camera to the Yi IoT app?

To add a camera to the Yi IoT app, open the app and click on the “+” icon. Follow the on-screen instructions to add your camera.

How do I download the Yi IoT app?

To download the Yi IoT app, go to your app store and search for “Yi IoT.” Once you find the app, click on “download” to install it on your device.

What is the Yi IoT Camera Setup guide?

The Yi IoT Camera Setup guide is a comprehensive guide that provides step-by-step instructions for setting up and using the Yi IoT Camera.

1. Introduction

Wi-Fi module can enable wireless communication between off-grid inverters and monitoring platform. Users have complete and remote monitoring and controlling experience for inverters when combining WiFi module with WatchPower APP, available for both iOS and Android based device. All data loggers and parameters are saved in iCloud. The major functions of this APP:

• Delivers device status during normal operation.
• Allows to configure device setting after installation.
• Notifies users when a warning or alarm occurs.
• Allows users to query inverter history data.

2. Unpack and Overview

2.1 Packing list

Before installation, please inspect the unit. Be sure that nothing inside the package is damaged. You should have received the following items inside of package:

• Wi-Fi Module x 1
• User’s Manual x 1

2.2 Product overview

1. Antenna
2. Inverter connection status LED
   OFF: Inverter does not provide power to Wi-Fi module.
   ON: Inverter provides power to Wi-Fi module successfully.
3. PWR: To indicate if the power is on.
   COM: To indicate if communication between Wi-Fi module and Inverter is normal.
   NET: To indicate if Wi-Fi module is connected to router.
   SRV: To indicate if Wi-Fi module is connected to the internet.

3. Wi-Fi Module Installation

Please follow below steps to install Wi-Fi module:
Step 1: The module contains four strong magnetics backing and can be easily be placed on the side of the inverter.
Step 2: Please use one RS-232 communication cable* to connect an inverter and Wi-Fi module as below chart.
* This communication cable is supplied with inverter package.

4. WatchPower App

4-1 Download and install APP

Operating system requirement for your smart phone:
iOS system supports iOS 9.0 and above
Android system supports Android 5.0 and above

Please scan the following QR code with your smart phone and download WatchPower App.

Or you may find “WatchPower” app from the Apple® Store or “WatchPower Wi-Fi” in Google® Play Store.

4-2 Initial Setup

Step 1: Registration at first time

After the installation, please tap the shortcut icon to access this APP on your mobile screen. In the screen, tap “Register” to access “User Registration” page. Fill in all required information and scan the Wi-Fi

Module PN by tapping icon. Or you can simply enter Wi-Fi Module PN directly. Then, tap “Register” button.

Then, a “Registration success” window will pop up. Tap “Go now” to continue setting local Wi-Fi network connection.

Step 2: Local Wi-Fi Module Configuration
Now, you are in “Wi-Fi Config” page. There are detailed setup procedure listed in “How to connect?” section and you may follow it to connect WiFi.

Diagnose Function

If the module is not monitoring properly, please tap “Diagnose ” on the top right corner of the screen for further details. It will show repair suggestion. Please follow it to fix the problem. Then, repeat the steps in the chapter 4.2 to re-set network setting. After all setting, tap “Rediagnosis” to re-connect again.

4.3 Login and APP Main Function

After finishing the registration and local Wi-Fi configuration, enter registered name and password to login.
Note: Tick “Remember Me” for your login convenience afterwards.

Overview
After login is successfully, you can access “Overview” page to have overview of your monitoring devices, including overall operation situation and Energy information for Current power and Today power as below diagram.

Devices

4.4 Device List

In Device List page, you can pull down to refresh the device information and then tap any device you want to check up for its real-time status and related information as well as to change parameter settings. Please refer to the parameter setting list.

Device Mode
On the top of screen, there is a dynamic power flow chart to show live operation. It contains five icons to present PV power, inverter, load, utility and battery. Based on your inverter model status, there will be Standby Mode, Line Mode, Battery Mode.

Device Alarm and Name Modification

Device Information Data
Users can check up Basic Information, Product Information, Rated information, History, and Wi-Fi Module Information by swiping left.

Basic Information displays basic information of the inverter, including AC voltage, AC frequency, PV input voltage, Battery voltage, Battery capacity, Charging current, Output voltage, Output frequency, Output apparent power, Output active power and Load percent. Please slide up to see more basic information.

Production Information displays Model type (Inverter type), Main CPU version, Bluetooth CPU version and secondary CPU version.

Rated Information displays information of Nominal AC voltage, Nominal AC current, Rated battery voltage, Nominal output voltage, Nominal output frequency, Nominal output current, Nominal output apparent power and Nominal output active power. Please slide up to see more rated information.

History displays the record of unit information and setting timely.

Wi-Fi Module Information displays of Wi-Fi Module PN, status and firmware version.

Parameter Setting This page is to activate some features and set up parameters for inverters. Please be noted that the listing in “Parameter Setting” page in below diagram may differ from the models of monitored inverter. Here will briefly highlight some of it, Output Setting, Battery Parameter Setting, Enable/ Disable items, Restore to the defaults to illustrate.
There are three ways to modify setting and they vary according to each parameter.

• a) Listing options to change values by tapping one of it.
• b) Activate/Shut down functions by clicking “Enable” or “Disable” button.
• c) Changing values by clicking arrows or entering the numbers directly in the column. Each function setting is saved by clicking “Set” button.

Please refer to below parameter setting list for an overall description and be noted that the available parameters may vary depending on different models. Please always see the original product manual for detailed setting instructions.

Parameter setting list: