Page 3 of 7
« Previous Next »
Assembly
The only tool you will need to assemble your vacuum is a 
- Place the Upper Handle onto the base and push it down. Then attach the handle with the 2 screws taped to the handle in a plastic bag.
- Insert the Lower Cord Wrap and turn it to the right to lock in place.
- Insert the Stretch Hose end into the back of the vacuum and twist right to lock in place.
- Wrap hose up and around the Hose Wrap on the handle. Slide end of hose into vacuum base.
- To install the optional Febreze® Filter, press the tank release button and pull tank from vacuum. Lift tab to access and remove Foam Filter from lid.
- Replace Foam Filter with Febreze® Filter. Close tank lid. Place tank back on vacuum and press firmly until you hear a “click.”
Pet Hair Eraser® Tool
Pet TurboEraser® Tool
Extension Wand (Crevice Tool stores inside)
Page 3 of 7
« Previous Next »
[View Manual Contents]
