Sections in this Manual
Page 2 of 2
« Previous
HARD FLOORS and RUGS
Choose the setting that matches the floor type you will be cleaning. Prime the system first by holding the solution spray trigger for 10 seconds. When you’re ready to clean, hold the trigger on both the forward and backward pass for great cleaning results.
EASY CLEANUP
For best results, flush the unit using the Rinse Tray. Then, rinse the dirty water tank, strainer, brush roll and brush chamber. After allowing your machine and components to dry completely, reassemble everything, making sure the machine’s brush window is securely in place before using your machine next time.
Tips and Tricks
- On hard floors, there is no need to vacuum before using CrossWave® Pet. This machine vacuums and washes at the same time.
- To dry floors faster, release the trigger and run the machine over the floor without dispensing the solution.
- When cleaning area rugs, remove any excess mud from your area rug prior to using your CrossWave® Pet.
- When cleaning excessively dirty or muddy hard floors, or if the brush roll looks dirty, use the Easy Clean Storage Tray to rinse the brush roll before cleaning your area rugs.
- For overly challenging and stuck-on messes on hard floors, activate the RUG mode and hold your CrossWave® Pet over the mess. Using short passes while holding the trigger allows the multi-surface brush to go to work.