BLAUPUNKT True Wireless Stereo Bluetooth Speaker BT22TWS Manual

True Wireless Stereo Bluetooth Speaker

BT22TWS

Owner’s Manual

True Wireless Stereo Bluetooth speaker

Important Notes

• This safety and operating instruction should be retained for future reference.
• The apparatus should not be exposed to dripping or splashing or placed in a humid atmosphere such as a bathroom.
• Do not install the product in the following areas:
• Places exposed to direct sunlight or close to radiators.
• On top of other stereo equipment that radiate too much heat.
• Blocking ventilation or in a dusty area.
• Areas where there is constant vibration.
• Humid or moist places.
• Do not place near candles or other naked flames.
• Operate the product only as instructed in this manual.
• Before turning on the power for the first time, make sure the power adaptor is properly connected.

For safety reasons, do not remove any covers or attempt to gain access to the inside of the product. Refer any servicing to qualified personnel.
Do not attempt to remove any screws, or open the casing of the unit; there are no user serviceable parts inside. Refer all servicing to qualified service personnel.

SAFETY INSTRUCTIONS

1. Read Instructions – All the safety and operating instructions must be read before the product is operated.
2. Retain Instructions – The safety and operating instructions should be kept with the product for future reference.
3. Heed warnings – All warnings on the product and in the operating instructions should be adhered to.
4. Follow instructions – All operating and users’ instructions should be followed.
5. Installation – Install in accordance with the manufacturer’s instructions.
6. Power sources – This product should be operated only from the type of power source indicated by the marking adjacent to the power cord entry. If you are not sure of the type of power supply to your home, consult your product dealer or local power company.
7. Water and moisture – To reduce the risk of fire or electric shock, do not expose the product to train, dripping, splashing or excessive moisture such as in a sauna or bathroom. Do not use this product near water, for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement or near a swimming pool (or similar).
8. Object and Liquid Entry – Never push objects of any kind into this product through openings, as they may touch dangerous voltage points or short-circuit parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. Do not place any object containing liquid on top of the product.
9. Servicing – Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
10. Replacement parts – When replacement parts are required, ensure that the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
11. The highest environmental temperature suitable for this product is 35°C.
12. ESD hints – If the product maybe reset or not reset to operation of control due to electrostatic discharge, just switch off and reconnect again, or move the product to another location.

ERP2 (Energy Related Products) note

This product with ecodesign complies with the stage 2 requirements of Commission Regulation (EC) NO. 1275/2008 implementing Directive 2009/125/EC regard to standby and off mode electric power consumption of electronic household and office equipment.

WARNING

This appliance is not intended for use by persons (including children) with reduced physical sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

1. Never use the device unsupervised! Switch off the device whenever you are not using it, even if this only for a short while.
2. The appliance is not intended to be operated by means of an external timer or separate remote control system.
3. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
4. Before operating this system, check the voltage of this system to see if it is identical to the voltage of your local power supply.
5. To prevent fire or shock hazard, do not expose this equipment to hot places, rain, moisture or dust.
6. Do not place this unit close to a strong magnetic field.
7. Do not place the unit on a amplifier or receiver.
8. Do not place this unit in a damp area as the moisture will affect the life of electric components.
9. If the system is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lens inside the player. If this occurs, the system will not operate properly. Please leave the system turned on for about an hour until the moisture evaporates.
10. Do not attempt to clean the unit with chemical solvents as this might damage the finish. Wipe with a clean, dry or slightly damp cloth.

NOTICE

Conformity Hereby, Blaupunkt Competence Center 2N-Everpol Sp. z o.o., declares that this equipment is in compliance with the essential requirement and other relevant provisions of Directive 2014/53/EU. Declaration of conformity can be obtained from the product page at www.blaupunkt.com. Responsible party: 2N-Everpol Sp. z o.o, Pulawska 403A, 02-801 Warsaw, Poland, Phone: +48 22 331 99 59, E-mail: [email protected] Your products is designed a manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2012/19/EU. Please inform yourself about the local separate collection system for electrical and electronic products. Please cat according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health. Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be dispose with normal household waste. Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health. Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box),polystyrene foam(buffer) and poly ethylene (bags, protective foam sheet). Your system consists of material which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. Recording and playback of material might require consent. See Copyright Act 1956 and The Performer’s Protection Acts 1958 to 1972.

Many thanks to purchase our mode, please read and reference the manual before operating this unit. Please keep the manual for future operation reference.

Location of controls

1-Power button;
2-DC 5V microUSB power jack;
3-volume up;
4-volume down;
5-signal indicator;
6-hook hole;
7-rubber bracket.

Battery charging

This unit had built-in rechargeable lithium battery inside. Before start the playing, please follow up below step for charging.

1. Using the supplied 1pcs USB to 2pcs microUSB type charging cable connects the speaker with your USB charger (USB adaptor or USB output port like on PC, USB rating output: 5V/1A, other USB charger with current equal or above 1A). The microUSB connector should connect with the DC 5V power jack of speaker, and the another terminal connect with USB charger. Then plug your USB charger into the household AC power.
2. The charging LED will light on in red color during charging, and the red color LED will off when the battery is fully charged.
3. The speaker will off automatically when the battery power exhausted, please arrange recharge for playing.
4. The output sound may intermittent due to lower power. This is not malfunction. Please arrange it for recharging.

Important:

We recommend connect the USB charger with rating output spec at DC 5V/1A, or equal or above 1A output current USB power. The general USB output on PC (personal computer) is 5V/1A (please reference your PC spec for checking). There may have some charging noise or abnormal function from speaker if the charging current is too low. If it happened, please remove the charging power and put the speaker in a while, then the speaker will reset the function in normal. Please kindly note this is not malfunction.

Notes:

Your battery lifetime will last longer if you follow up below simple guidelines for charging and storing.
a. For charging first time, charge it at least 10 hours.
b. Recharge and store the unit within the temperature range of 5°C~35°C (40°F~95°F).
c. Do not charge longer than 24 hours. Excessive charging or discharging may shorten the battery’s life.
d. Battery life naturally shortens slowly over time.
e. Please turn off the speaker if long time not to use.
f. The speaker can play music during charging.
g. Due to prolong charging and discharging, the unit battery life will be affected and playback time will also be shortened. We cannot guarantee the same playback consistently throughout and this is not include in our warranty and service.

Bluetooth operation

Before start to do the operation, you can choose to enjoy the music as all-in-one speaker(two speaker attached together); or shift off the speaker from the rubber bracket, then rotate the top speaker in clockwise direction to separate them for two speakers playing; in case of assemble the two speakers, please put them attached together, then rotate it in counterclockwise direction for tighten.

TWS playback (two speakers playing at same time): For first time being used, long press the power button to power on the two speakers at the same time; put the two speakers together within 30cm and wait a while; then the speaker will pair each other automatically. There will have a short notice sound come from the speaker after paired successful, and the signal LED on the master speaker will flicker in high speed for Bluetooth pairing; the LED on the slave speaker (another speaker) will light on in stable. Turn on the Bluetooth function on your device (Details please reference the manual of device for operation), check the available Bluetooth device list on your device, select” BP BT22″for pairing; there will have two short notice sound come out from the master speaker after paired successful. Select and play the music from your Bluetooth device, then the sound will wireless playback from two speakers. And the best working distance is within 10 meters between two speakers. The another speaker will be controlled correspondently in case of you do below operation on one side speaker during TWS playback mode: a. Short press the +/- button to switch the playing track; press and hold the +/- button to increase or decrease the volume. b. Short press the power button to play/pause the music. c. Short press the power button twice to quit the current Bluetooth pairing with other device. d. Short press the power button 3 times to disconnect TWS speaker connection. e. Long press the power button to turn off the speaker; And the two speakers can pair with your device automatically after power on again. Single playback (one speaker playing): The Bluetooth operation is similar to TWS playback mode; but power on and has sound output in one speaker only. Please pay attention the Bluetooth pairing name is “BP BT22” as well during pairing. Phone call hands free: when the cell phone was paired with speaker, and an incoming call is arriving; short press the power button can pick up the call; answer the phone call and talk aim to the microphone (locate next to inner driver) within 30cm (suggested distance) in order get better conversation sound quality; short press the power button again can end the phone call and resume the music playback; short press the power button twice to reject the phone call. The phone call or talking voice will output on one speaker only in hands free mode, but there was built-in microphone in each speaker. We suggest to take one speaker for phone call hands free operation.

Notes:
a. All Bluetooth devices are not guaranteed to pair successfully due to different design and brand.
b. Please do not put your cell phone very close to the speaker during phone call hands free conversation, in order to avoid interference which will impact the conversation sound quality.
c. The Bluetooth best working distance is within 10 meters without any obstacle in between.
d. The unit will power off automatically in case of unpaired with device lasting 10mins in order to save battery power. Trouble shooting

1. The unit cannot power on. a. Please charge the unit and try again. b. Please contact the service center in case of issue remains.
2. There is no or intermittent sound output in Bluetooth mode. a. Please turn off the Bluetooth, and repair with the speaker. b. Please put your Bluetooth device closer with the speaker.
3. The two speakers cannot pair each other successfully(TWS pair failed).

a.Please try to power off both speakers first, then power on the two speakers at same time, and put them together for a while. Then the speaker will connect each other.
b.Please contact the service center in case of issue remains. Specification Power source: DC5V, 1A; (or DC 5V, rating current above 1A). Bluetooth version: 4.2, best working distance within 10 meters. Rated power: 2 x 8W. Battery power: 2 x 3.7V/1500 mAh rechargeable lithium battery. Charging time: 2.5~3 hours base on DC5V, 1A input. Music playback time: 6~8 hours. Waterproof:IPX 7 supported. Power consumption: 13.6Watt. Standby power consumption: < 0.5Watt. Accessory:1 pcs x USB charging cable. (The above spec may revise without prior notice)