D-Link DIR-615 Wireless N300 Router User Guide
BEFORE YOU BEGIN
Delivery Package
- Router DIR-615
- Power adapter DC 5V/1A
- Ethernet cable
- “Quick Installation Guide” (brochure).
If any of the items are missing, please contact your reseller.
The “User Manual” and “Quick Installation Guide” documents are available on D-Link website (see www.dlink.ru).
Using a power supply with a different voltage rating than the one included will cause damage and void the warranty for this product.
Default Settings
Domain name : dlinkrouter.local.
IP address :192.168.0.1
Username (login) : admin
Password : admin
Name of wireless network (SSID) : DIR-615
Network key (PSK password) : see WPS PIN on the barcode label on the bottom panel of the
device
The router DIR-615 with default settings cannot connect to the Internet. To get started, please set your own password for access to the web-based interface and change the WLAN name (SSID); then, if needed, configure other settings recommended by your ISP.
Safety Rules and Conditions
Please carefully read this section before installation and connection of the device. Make sure that the power adapter and cables are not damaged. The device should be used only as intended in accordance with the documents.
The device is intended for use in dry, clean, dust-free, and well ventilated areas with normal humidity away from strong heat sources. Do not use the device outdoors or in the areas with high humidity. Do not place foreign objects on the device. Do not obstruct the ventilation openings of the device. The environmental temperature near the device and the temperature inside the device’s cover should be within the range from 0 °С to +40 °С.
Only use the power adapter supplied with the device. Do not plug in the adapter, if its case or cable are damaged. Plug the adapter only into working electrical outlets with parameters indicated on the adapter.
Do not open the cover of the device! Unplug the device before dusting and cleaning. Use a damp cloth to clean the device. Do not use liquid/aerosol cleaners or magnetic/static cleaning devices. Prevent moisture getting into the device or the power adapter.
The service life of the device is 2 years.
System Requirements and Equipment
- An Android or iPhone mobile device (smartphone or tablet) or a computer with any operating system that supports a web browser.
- A PC web browser to access the web-based interface of the router: Apple Safari 8 and later, Google Chrome 48 and later, Microsoft Internet Explorer 10 and later, Microsoft Edge 20.10240 and later, Mozilla Firefox 44 and later, Opera 35 and later.
- A NIC (Ethernet or Wi-Fi adapter) to connect to the router.
- An 802.11b, g, or n Wi-Fi adapter to create a wireless network.
CONNECTION AND CONFIGURATION
- Connect the power cord to the power connector port on the back panel of the router, then plug the power adapter into an electrical outlet or power strip.
- Connect the router to your PC.
- PC with Ethernet adapter: connect an Ethernet cable between an available LAN port of the router and the Ethernet port of your PC. Turn on your PC and wait until your operating system is completely loaded. Make sure that your Ethernet adapter is configured to obtain an IP address automatically.
- PC with Wi-Fi adapter: turn on your PC and wait until your operating system is completely loaded. Then turn on your Wi-Fi adapter and make sure that it is configured to obtain an IP address automatically. Connect to the network DIR-615. Use WPS PIN from the barcode label as the network key.
- Start a web browser. In the address bar of the web browser, enter the IP address of the router (by default, 192.168.0.1). Press the Enter key.
After the first access to the web-based interface you are forwarded to the start page of the Setup Wizard. - Click the START button.
- Select a language for the router’s web-based interface.
- Click the CONTINUE button in order to configure the device with the Setup Wizard or the ADVANCED SETTINGS button to configure all needed setting manually,
When the web-based interface is accessed the next time and after, the login page opens. Enter the username (admin) in the Username field and the password you specified in the Password field, then click the LOGIN button.
Use the menu in the top part of the page to configure the router.
To configure connection to the Internet, go to the Internet / WAN page in the Settings section.
To configure the wireless network, go to the Wireless network page in the Settings section.
The web-based interface of the router is multilingual. To select another language, go to the Administration page in the Management section.
For detailed description of every page of the web-based interface, see the “User Manual” document on D-Link website (see www.dlink.ru).
TROUBLESHOOTING
- How do I reset the router to the factory default settings?
- You can restore the factory default settings via the hardware WPS/RESET button located on the back panel of the router. Press the button (with the device turned on) and hold it for 10 seconds, then release it. Wait until the router is rebooted (about a minute or two).
- Then access the web-based interface (see the Default Settings section of the present document) and configure all needed settings.
- What can I do if my router is not working correctly?
Below are some steps applicable to the most common issues.- 1. Check the LEDs on the top panel of the router. The following LEDs should be solid or fast blinking blue: POWER, INTERNET and WLAN/WPS (if the wireless network is on and in use).
- Make sure that all cables are connected properly.
- Power off the router for 20 seconds, then power it on again.
- Why am I unable to connect to the Internet?
- Contact your ISP to make sure that the relevant service is available and that you use correct connection settings.
TECHNICAL SUPPORT
You can find software updates and user documentation on our website.
D-Link provides its customers with free support within the product’s warranty period.
Customers can contact the technical support group by phone or by e-mail/Internet.
FOR TELEPHONE NUMBERS AND ADDRESSES OF D-LINK OFFICES WORLDWIDE VISIT
http://www.dlink.com
GPL Code Statement
This D-Link product includes software code developed by third parties, including software code subject to the GNU General Public License (“GPL”) or GNU Lesser General Public License (“LGPL”). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL code and LGPL code used in this product, are available to view the full GPL Code Statement:
https://tsd.dlink.com.tw/GPL
The GPL code and LGPL code used in this product is distributed WITHOUT ANY
WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL code and the LGPL code for this product and the terms of the GPL and LGPL.
Written Offer for GPL and LGPL Source Code
Where such specific license terms entitle you to the source code of such software, D-Link will provide upon written request via email and/or traditional paper mail the applicable GPL and LGPL source code files via CD-ROM for a nominal cost to cover shipping and media charges as allowed under the GPL and LGPL.
Please direct all inquiries to:
Email:
[email protected]
Snail Mail:
Attn: GPLSOURCE REQUEST
D-Link Systems, Inc.
14420 Myford Road, Suite 100
Irvine, CA 92606
