Honeywell Pro Series Thermostat Manual

Sections in this Manual

Manufactured by Honeywell

Page 4 of 5 « Previous Next »

Press and hold CENTER and + buttons for approximately 3 seconds to enter the advanced menu.
Press Select to enter ISU.
Press Select to cycle through menu setup options.
Press + or – to change values or select from available options.
Press Select and confirm your settings or press Back to ignore changes and return to ISU menu screen to continue editing another setup option.
To finish the setup process and save your setting, press Home and return to Home screen.

NOTE: A complete list of all setup (ISU) parameters and options starts below and continues through page 10.

NOTE: Depending on system settings, not all options may be available.

To perform a System Test:

Press and hold CENTER and + buttons for approximately 3 seconds to enter advanced menu.
Use + to go to TEST. Press Select to enter System Test.
Use + to change between Heat, Cool, Fan, Em Heat, or Ver (thermostat version information). Press Select.
Press + to turn stages on one at a time, and press – to turn them off.
Use the Home button to exit the System Test.

Shaded areas below apply only to TH6320U/TH6220U or as otherwise noted.

The default security code for the Honeywell Pro Series thermostat is 1234

Heat

0 All Off
1 Heat Stage 1 on
2 Heat Stage 2 also on
3 Heat Stage 3 also on

Cool
0 All Off
1 Cool Stage 1 on
2 Cool Stage 2 also on

Em Heat
0 All Off
1 Em Heat on

Fan
0 Fan Off
1 Fan On

Page 4 of 5 « Previous Next » [View Manual Contents]