Manufactured by JLab
FITTING
Try all the optional Cush Fins and ear tips for best fit and proper seal.
The Cush Fin should be aligned by positioning the contour around the microphone hole.
TROUBLESHOOTING
NO AUDIO IN ONE EARBUD (MANUAL RESET)
Enter your Bluetooth device settings and forget the JBuds Air.
Open the charging case door and leave both earbuds inside. Starting with ONE earbud, quickly press the button 7x times. Light will blink blue 4x times. Leave the earbuds in the charging case.
Repeat with the other earbud.
Quickly press the button 7x times. Light will blink blue 4x times.
Take both earbuds out of the charging case. Wait for one of the earbuds to turn solid white and one to blink blue/white. You are now ready to pair to your Bluetooth device.
Instructional videos at: JLAB.COM/MANUALS
BLUETOOTH DEVICE DOES NOT CONNECT / RECONNECT
Enter your Bluetooth device settings and forget the JBuds Air.
On your device, turn OFF then ON Bluetooth.
Open the charging case and wait for one earbud to turn solid white and one to blink blue/white.
Select “JLab JBuds Air” in device settings to reconnect.
