Sections in this Manual
Page 3 of 3
« Previous
Reset
You might need to reset your earbuds if you experience any connectivity problems or function issues.
- Place the earbuds in the charging case and make sure they are being charged.
- Press and hold the button on both earbuds for 8 seconds until the earbud LED indicators flash red for 3 times.
- Take the earbuds out of the charging case and wait until the LED indicator on one of the earbuds flashes fast while the other breathes slowly. This confirms that the reset was successful and your earbuds can be connected normally.
Specifications
Specifications are subject to change without notice.
| Input | 5 V 0.7 A |
| Rated output power | 5 mW @ 1% THD |
| Battery capacity | 85 mAh x 2 (earbuds); 770 mAh (charging case) |
| Charging time | 2 hours |
| Playtime (varies by volume level and content) | Up to 9 hours (Total 35 hours with the charging case) |
| Driver size | 8 mm x 2 |
| Frequency response | 20 Hz – 20 kHz |
| Impedance | 16 Ω |
| Waterproof level | IPX7 |
| Bluetooth version | V 5.0 |
| Bluetooth range | 10 m / 33 ft |