IN THE BOX

• Wyze Cam xl
• Quick Start Guide xl
• USB Cable xl
• Wall Plate xl
• Power Adapter xl
• Mounting Tape xl

Illustrated Diagrams

From the front:

From the rear:

From below:

Numbers in images above explained:

1. Lens
2. Microphone
3. USB Output
4. Power Input
5. Status Light
6. MicroSD Slot (SD card not included)
7. SETUP Button

SETUP

1. Download the Wyze app and create an account

2. Connect the camera to a power outlet and wait for 20 seconds until the 20 seconds until the yellow status light flashes

3. Press the SETUP button for 3 seconds until you hear a voice prompt

4. Follow the Wyze app to finish setup

LIGHT INDICATIONS

Solid yellow light

The device is powered on and initializing

Flashing yellow light

The device is ready to connect

Flashing yellow & blue tights

Connection is in progress

Flashing blue light

The device is connected and finishing setup

Solid blue light

The device is working properly

NEED HELP?

Tutorial Videos
www.youtube.com/wyzelabs

Troubleshooting & FACs
support.wyzecam.com

Community
forums.wyzecam.com

Contact Us

1-844-WYZECAM

Wyze Cam Pan v2 1080p Wi-Fi Indoor Smart Home Camera

Specifications

• PACKAGE DIMENSIONS: 43 x 3.66 x 2.76 inches
• ITEM WEIGHT: 1 ounces
• CONNECTIVITY TECHNOLOGY: Wireless
• SPECIAL FEATURE: Night Vision, Motion Sensor
• INDOOR/OUTDOOR USAG: Indoor
• RECOMMENDED USES FOR PRODUCT: Indoor
• BRAND: WYZE

Introduction

A low-cost interior security camera with support for Alexa, Google, and IFTTT interfaces, colour night vision, and the ability to pan and tilt to view an entire room is the Wyze Cam Pan V2.

WHAT’S IN THE BOX

• Wyze Cam Pan × 1
• USB Cable × 1
• Power Adapter × 1
• Quick Start Guide × 1

Parts Description

1. Lens
2. Status Light
3. Light Sensor
4. Power Input
5. MicroSD Slot (SD card not included)
6. SETUP Button
7. Microphone

SETUP

1. Download the Wyze app and create an account.
2. Connect the camera to a power outlet and wait for 15 seconds until the red status light flashes.
3. Press the SETUP button for 3 seconds until you hear a voice prompt.
4. Follow the Wyze app to finish setup.

Wyze Cam V3 User Manual

USER MANUAL

FCC RADIATION EXPOSURE 

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISEDC RSS WARNING

This device complies with ISEDC licence-exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Le present appareil est conforme aux CNR d’ISEDC applicables aux appareils radio exempts de licence. L’exploitation est autorisee aux deux conditions suivantes:

1. I’appareil ne doit pas produire d’interference, et
2. I’appareil doit accepter toute interfdrence radio6lectrique subie, mSme si rinterf6rence est susceptible d’en compromettre le fbnctionnement.

ISEDC RADIATION EXPOSURE STATEMENT:

This equipment complies with ISEDC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

This equipment should be installed and operated with a minimum distance of 20cm between the radiator &your body.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Only use the power supply provided.

IN THE BOX

• Wyze Cam x1
• USB Cable x1
• Wall Plate x1
• Indoor Power Adapter x1
• Mounting Tape x1
• Mounting Screw x1
• Quick Start Guide x1

1. Status Light
2. Lens
3. Microphone
4. Speaker
5. Power Cable
6. MicroSD Slot (SD card not included)
7. SETUP Button
8. Mounting Hole

DOWNLOAD THE WYZE APP BY SCANNING THIS QR CODE

OR DOWNLOAD DIRECTLY FROM THE APPLE APP STORE OR GOOGLE PLAY

1. Connect the camera to a power outlet and wait for 20 seconds or until the status light flashes red.
   
2. Press the SETUP button for 3 seconds or until there is a voice prompt.
   
3. Follow the instructions in the Wyze app to finish setup.
   

LIGHT INDICATIONS

Solid red light

The device is powered on and initializing

Flashing red light

The device is ready to connect

Flashing red & blue lights

Connection is in progress

Flashing blue light

The device is connected and finishing setup

Solid blue light

The device is working properly

FCC WARNING:

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FAQs

What are the specs for the free cloud plan which is included?

Our camera will capture one 12-second alert video every five minutes when motion or sound is detected. Using a microSD card with the ‘record on event’ or ‘continuous recording’ feature turned on will allow the camera to record the rest of the footage that the cloud video does not capture. We also have Cam Plus, which is an add-on service and upgrades the free 12-second motion recording already included with Wyze Cam. This upgrade will record motion and store the events to the cloud for as long as motion is detected and adds Person Detection. That means no 12-second limit and no cooldown period. The recordings are stored in the cloud for 14 days.

Is it true that this is only 2.4ghz wifi, and that it will not connect to 5ghz wifi?

This is correct. For most remote wireless devices 2.4ghz is a better frequency to use. While there is more wireless congestion, 2.4 has double the range and penetration compared to 5ghz.

If I was to set it up in one room, how easy would it be to move it to another room whenever I wanted to see a stream of one?

Easy just plug the power supply in.

Can this camera work as a stand alone unit — without any wifi or cell service? like a trail cam (hunting) where you remove sd card to view with a pc?

Once you set it up it will function as a stand alone unit. I’ve set them up on WiFi and then used a portable usb power supply to record to the sd card where there is no wifi. Good for time-lapse captures of build projects or other similar things.

will this connect to a hotel wifi?

Wyze Cam devices will not work with enterprise WiFi networks that have a landing page, sign in portal or require a browser to complete the connection such as hotel or public network.
If your internet requires you to provide not only an SSID but also a username, account name and password, you will not be able to use Wyze Cam devices.

How to download videos saved on SD card? What are options?

ou can either download the video from the Wyze app or take out the SD card and view it through the computer.

Are these wireless?

No, not wireless.

Can you do continuous live view with no timeout? Trying to use it as a baby monitor.

Yes u absolutely can, as well as u can continuously record if u have any SD card in the camera itself. This would work well, we use one of ours as a dog cam for a similar purpose.

What is the difference between Wyze Cam V2 and V3?

The Wyze Cam V3 has a new processor, which allows for better image quality and faster response time.

Does it work without internet only have cell service ?

We use ours with MiFi (which is essentially cell service) and have been extremely pleased with it. You just set it up as you would with regular internet – using the MiFi as your router and connecting with your password. We are going to try this newer camera for outdoor surveillance and are thrilled that it has two-way audio and a siren button.

How can I upgrade my Wyze Cam V2 to Wyze Cam V3?

You will need to purchase the Wyze Cam V3 camera and then follow the instructions in the User Manual to perform the upgrade.

What is the difference between the Night Vision version and Non-Night Vision version?

The Night Vision version has infrared LEDs that allow it to see in low light conditions. The Non-Night Vision version does not have infrared LEDs.

How many cameras come with? Just 1?

It’s only for one camera.

This come with base station ?

No, Wyze Cam v3 doesn’t require a Base Station to work.

How close does the camera have to be to a network to work?

This Camera has to have a wifi signal to work with the app. It is really easy to setup.

Is there ai to reduce false alarms as is available in some expensive cams?

Yes. You would have to pay for the subscription.

VIDEO

www.wyze.com

WYZE WW3 Watch 47 Smartwatch

ACTIVATION

1. Please plug the charger into a standard USB port (SW, 1A) and attach the Wyze Watch 47 with the charging clip.
2. Wyze Watch 47 comes fully charged,  Charging it will activate the Watch. Your Wyze Watch 47 screen will light up when it is ready for setup.

SETUP

1. Download the Wyze app by scanning the QR code below. 
2. Sign up or login to your Wyze account. Please make sure that the Bluetooth is turned on for the Wyze app.
3. Click on Add New Device and select WYZE Watch 47 from the list.
4. Scan the QR code on the screen, or you can click the Manual pair to select your device ID and start pairing.
5. Wait for “‘Success” to appear on your Wyze Watch 47. When it displays a clock, the setup process is complete. Enjoy your Wyze Watch.

Or download directly from the Apple App Store or Google Play.

CONTROLS

Press the right button to unlock the Wyze Watch 47 screen. Press again and click on the icons to access each function.

If you want to change the watch face, press and hold the screen and swipe left and right to select different styles.

You may also go to the Wyze app to see more designs and sync them with your Wyze Watch 47.

IN THE BOX

1. Wyze Watch 47 xl
2. USB Charger Cable x 1
3. Quick Start Guide x 1

• Touch Screen
• Home Button
• Charging Port II Heart Rate Sensor

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired opera­tion.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursu­ant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encour­aged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consu It the dealer or an experienced radio/TV techni­cian for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in porta­ble exposure conditions without restriction. FCC ID: 2AUIUWW3 For more compliance information, please see: main function page ->setting-> compliance info

NEED HELP?
Resources & Support support.wy.ze.com Community
https://wyze.com/community

WYZE V2 Cam Pan User Guide

IN THE BOX

• Wyze Cam Pan × 1
• USB Cable × 1
• Power Adapter × 1
• Quick Start Guide × 1

FRONT

BACK

BOTTOM

(1) Lens
(2) Status Light
(3) Light Sensor
(4) Power Input
(5) MicroSD Slot (SD card not included)
(6) SETUP Button
(7) Microphone

SETUP

1. Download the Wyze app and create an account.
   
   
2. Connect the camera to a power outlet and wait for 15 seconds until the red status light flashes.
3. Press the SETUP button for 3 seconds until you hear a voice prompt.
4. Follow the Wyze app to finish setup.

LIGHT INDICATORS DURING INSTALLATION

 Solid red light
The device is powered on and initializing

 Flashing red light
The device is ready to connect

 Flashing red and blue lights
Connection is in progress

 Flashing blue light
The device is connected and finishing setup

 Solid blue light
The device is working properly

LIGHT INDICATORS AFTER SETUP

 Solid red light
Live stream is being viewed or a recording is in progress

 Quickly flashing red light
Siren is in use

 Solid blue light
The device is working properly and no operations are running

FCC WARNING

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC RADIATION EXPOSURE STATEMENT

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISEDC RSS WARNING

This device complies with ISEDC licence-exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

ISEDC RADIATION EXPOSURE STATEMENT

This equipment complies with ISEDC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Only use the power supply provided.

Wyze Video Doorbell 

Quick Start Guide

IN THE BOX

• Wyze Video Doorbell × 1
• Wyze Chime × 1
• Wall Plate × 1
• Wedge × 1
• Wiring Cap × 4
• Fuse × 1
• Extension Wires × 2
• Screw Assembly × 1
• Quick Start Guide × 1
• Wall Plate
• Wedge
• 
• 

Doorbell Front

Doorbell Back

Wyze Chime

SETUP

1. Download the Wyze app and sign in or create an account. Follow the instructions in the Wyze app to finish installation
   DOWNLOAD THE APP BY SCANNING THIS QR CODE
   
   OR DOWNLOAD DIRECTLY FROM THE APPLE APP STORE OR GOOGLE PLAY
2. Open the Wyze app and Tap the + plus sign on the top left of the Home screen. Tap “Add Device” and then select Wyze Video Doorbell.
   *Detailed installation steps are available in the Wyze app.
3. Add Wyze Chime, select continue adding filters. Follow the instructions in the Wyze app to finish installation. Select “Add Later”. You can add a Wyze Chime device by selecting “Device Settings” and tapping “Extended Devices”.

INSTALLATION

Installing without the wedge

Installing with the wedge

Plug the Wyze Chime into an outlet

NEED HELP?

Scan the QR code to learn more

Contact our support wizards:
https://support.wyze.com
Resources & Support
support.wyze.com

LIGHT INDICATIONS

Wyze Video Doorbell

Solid yellow light
The device is powered

Flashing yellow light
Waiting for connection

Flashing yellow/blue light
Connecting to router

Flashing blue light
Connecting to external network

Solid white light
Connected

Wyze Chime

Solid yellow light
The device is powered

Flashing blue light
Connecting to network

Solid blue light
Connected

WYZE VIDEO DOORBELL 

Any change or modifications not expressly approved by the party responsible for compliance could void the user ’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC RADIATION EXPOSURE STATEMENT

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunc- tion with any other antenna or transmitter.

ISEDC RSS WARNING

This device complies with ISEDC licence-exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

FCC RADIATION EXPOSURE STATEMENT

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISEDC RSS WARNING

This device complies with ISEDC licence-exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

ISEDC RADIATION EXPOSURE STATEMENT

This equipment complies with ISEDC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

WYZE CHIME FCC STATEMENT

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.– Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

ISEDC RSS WARNING

This device complies with ISEDC licence-exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

ISEDC Radiation Exposure Statement:
This equipment complies with ISEDC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment should be installed and operated with minimum distance 40cm between the radiator& your body.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

WYZE WVOD1B1 Wireless Outdoor Security 
Camera User Guide

SETUP

1. Download the Wyze app and create an account.
2. Follow the Wyze app to set up the base station
3. Follow the Wyze app to set up the camera.
4. Follow the instructions in the Wyze app to mount the camera.

1. SYNC Button
2. MicroSD Slot (MicroSD card not included)
3. Reset
4. USB Charging port
5. Power Input
6. LAN Port
7. Status Light

1. Light Sensor
2. Lens
3. Microphone
4. Removable Magnetic Mounting Base
5. On/Off Switch USB Charging Port
6. Status Light
7. SYNC Button
8. MicroSD Slot (MicroSD card not included)
9. Mounting Hole

IN THE BOX

• Wyze Cam Outdoor x1
• Base Station x1
• Base Station Power Adapter x1
• Base Station Ethernet Cable x1
• Camera Charging USB Cable x1
• Quick Start Guide x1
• Screw Assembly x1

Wall Mounting

Ceiling Mounting

LIGHT INDICATIONS

Base Station

Precautions:

1. Prolonged direct sunlight can heat the inside of your camera past its maximum operating temperature of 122°F (50°C). Avoid directly sunlight where possible and only use your camera in environments within its operating temperature range: -4° to 122°F (-20° to 50°C).
2. To charge your camera, plug the included micro USB cable into the USB port on your base station and connect it to your camera. Or use a power adapter and cable that will provide 5V/2A power.

FCC Warning:

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISEDC RSS warning :

This device complies with ISEDC licence-exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

ISEDC Radiation Exposure Statement:

This equipment complies with ISEDC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

CONTAINS A LITHIUM ION BATTERY

Do not improperly dispose or discard. Lithium-ion batteries should be recycled. For information on how you can recycle the product at no cost, visit wyze.com/recycle.

NEED HELP?

Tutorial Videos
www.youtube.com/wyzelabs
Troubleshooting & FAQs
support.wyze.com
Join Our Community
https://wyze.com/community
Contact Us
https://support.wyzecam.com/
1-844-WYZECAM

GET BETTER SECURITY WITH Cam Plus

Record Full-Length Videos
Get unlimited full-length video recordings.

Smart AI Detection
Detect people, packages, vehicles, and more.

Back-to-Back Event Recording
Capture everything without 5-minute gaps.

Exclusive Discounts
Get exclusive discounts on Wyze products.

Subscribe or learn more at services.wyze.com.

IN THE BOX

• Wyze Video Doorbell Pro × 1
• Wyze Chime Pro × 1
• Screw Back Plate × 1
• Adhesive Tape Back Plate × 1
• USB Charging Cable × 1
• Wire Nuts × 3
• Jump Wire × 1
• Long Screws × 3
• Short Screws × 3
• Extension Wires × 2
• Expansion Tubes × 3
• Adhesive Tape × 1
• T8 Screwdriver × 1
• Quick Start Guide × 1

Product Description

SETUP

1. Download the Wyze app and sign in or create an account.
   
   Apple logo and App Store are trademarks of Apple Inc., registered in the U.S. and other countries and regions. Google Assistant, Google Home, Google Play, and the Google Play logo are trademarks of Google LLC.
2. Open the Wyze app and tap the + plus sign on the top left corner of the Home screen. Tap Add Device > Cameras > Wyze Video Doorbell Pro. Follow the in-app instructions to finish installation.

INSTALLATION

Installation with screws powered by AC wire.

Installation with screws.

Installation with adhesive tape

Installation tip: Install doorbell less than 6.6 feet above ground level.

WHERE TO PLACE YOUR DOORBELL AND CHIME

• The ideal location to place the chime is half-way between your router and your doorbell.
• Heavy-duty walls and floors made of materials like concrete, brick or metal can weaken your doorbell signal strength.

WARNING: Do not use the battery near a heat source. Do not use the battery near fire or an oven, or in an ambient temperature exceeding 80°C. Over-heating may cause an internal short-circuit, heat generation, smoking, deformation or burning.

OPTIONAL CHOICES FOR CORNER KIT OR WEDGE KIT USERS

Use the Corner Kit to change the horizontal angle 

Use the Wedge Kit to change the vertical angle 

STATUS LIGHT GUIDE

Wyze Video Doorbell Pro

Solid white light
The device is charging

Solid blue light
The device is fully charged

Wyze Chime Pro

Flashing red light
Connecting to doorbell

Flashing yellow light
Waiting for connection

Flashing blue light
Connecting to network

Solid blue light
Connected

FCC WARNING

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC RADIATION EXPOSURE STATEMENT

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body

ISED RSS WARNING
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

ISED RADIATION EXPOSURE STATEMENT
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

1. the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
2. the maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate.

Disclaimer: The products, accessories, user interfaces, etc. illustrated in this guide are intended for reference only. Due to product updates, the actual product and the illustrations in this guide may vary.

NEED HELP?
Contact our Support Team:
https://wyze.com/support
Join the Community:
https://wyze.com/community

Scan the QR code to learn more

Wyze WLPS1 Switch 2.4 GHz WiFi Smart Light Switch

WELCOME TO WYZE

Thanks for getting your hands on a Wyze Switch. If this is your first Wyze product, welcome to the Wyze family! Your Wyze Switch will make your existing light fixtures smart to allow control by voice, the Wyze opp, or the switch itself. It can also control other Wyze devices for an integrated smart home experience!

IN THE BOX
Wyze Switch x 1
Wall Plate x 1
Setup Kit x 1
(Screws x 2, Wire Nuts x 2, Accessory Wire x 1,
Wire Label Sheet x 1 )
Quick Start Guide x 1

Warning!
Wyze Switch requires basic electrical wiring for installation. Check your local laws for installation. If you are outside of North America, installation and wiring must be performed by a licensed electrician. Make sure you follow all code standards when doing wire installation. If you are uncomfortable with working with wires, please contact a licensed electrician for help.
Neutral Wire Required
A neutral wire is required to set up Wyze Switch. These wires are typically white and can be found in your electrical box. Wyze Switch will NOT work without a neutral wire.
Single Pole Switch
If your light can be controlled by 2 separate light switches, then it is NOT a single pole switch. Wyze Switch is a single pole switch only and is NOT compatible in a multi-way setting.
SETUP
To make the installation simple and safe, the Wyze opp will walk you through the step-by-step installation process. Please follow all safety precautions in the Wyze app. Download the Wyze app and sign in or create an account.
Open the Wyze app and tap the + sign in the top left corner of the Home tab. Tap Add Device> Power & Lighting> Wyze Switch and then follow the instructions.

STATUS LIGHT INDICATORS

• Solid white light
  The power is on
• Off
  The power is off
• Slow flashing light
  In pairing mode or updating firmware
• Fast flashing light
  Connecting to WiFi
• Single blink
  Confirming a command was sent
  

SINGLE PRESS
Your Wyze Switch can make your regular lighting smart by connecting it to the Wyze opp and voice assistants. Wyze Switch has 2 modes to control your lighting:

• Classic Control: For light fixtures with regular bulbs. Selecting this option will manually turn the power on or off for your light fixture.
• Smart Control: For light fixtures with smart bulbs. Selecting this option will keep power turned on for your bulb and send on/off commands through the cloud. For a better experience, replace your existing bulbs with Wyze Bulb or Wyze Bulb Color to customize the color, brightness, or temperature from your Wyze Switch.

ADDITIONAL CONTROLS

You can use this feature to interact with other Wyze products as well as voice assistants. Set up these controls by going into the Settings page and enabling Additional Controls. Enabling this feature will cause a slight delay for Single Press response and
you MUST enable Additional Controls to use them with 3rd-party integrations. The status light on Wyze Switch will blink once to show a command was received.

Additional Controls include:

• Double Press
• Triple Press
• Press and Hold

Note: Press and Hold requires holding the switch for 1 second. The action happens after you let go.

RESETTING THE DEVICE

Press and hold your Wyze Switch for 20 seconds until the status light blinks rapidly to reset it. When you let go, the status light will blink slowly to show that the switch is ready for setup.

SPECIFICATIONS

Model: WLPSl
Power Supply: 120V-, 60Hz

Maximum Load: Incandescent 600W, CFL/LED 300W,
15A Resistive Power Consumption: <1 W
Operating Temperature: 32°F – 104°F (0°C – 40°C)
Storage Temperature: -4°F – 140°F (-20°C – 60°C)
Humidity: 0-85%, non-condensing
Communication Mode: 802.11 b/ g/n, 2.4 GHz, Bluetooth
Range: -131 ft indoors (depending on building materials)
FCC ID: 2AUIUWLPS1 IC ID: 25466-WLPSl
Conforms to UL Std. 60730-1, Certified to CSA Std. E60730-1

FCC WARNING

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC CAUTION
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

FCC RADIATION EXPOSURE STATEMENT:
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

ISED NOTICE:
(1) This device complies with Science and Economic Develop­ment Canada’s license-exempt RSS standard(s). Operation is subject to the following two conditions: this device may not cause interference, and this device must accept any interference, including interference that may cause undesired operation of the device.
(2) This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmit­ter, except tested built-in radios.
(3) La fonction de selection de l’indicatif du pays est desactivee pour les produits commercialises aux Etats-Unis et au Canada.

ISEDC RADIATION EXPOSURE STATEMENT:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20 cm between the radiator and your body.
Declaration d’exposition aux radiations: Cet equipment est conforme aux limites d’exposition aux rayonnements IC etablies pour un environnement non controle. Cet equipement doit etre installe et utilise avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.

NEED HELP?
Contact our Support Team:
https://wyze.com/support
Join the Community:
https://wyze.com/community

WYZE Cam Outdoor Starter Bundle (Includes Base Station and 1 Camera)

Specifications

• Dimensions
  6.4 x 3.2 x 2.9 inches
• Weight
  1.2 pounds
• Batterie
  1 Lithium Polymer batteries required. (included)
• Indoor/Outdoor Usage
  Outdoor
• Connectivity Technology
  Wireless
• Recommended Uses For Product
  Surveillance
• Room Type
  Garage
• Brand
  WYZE

Protect every nook and cranny of your house Connect up to four cameras to a single base station and use the Wyze app to view all video streams. One camera and one base station are included in the beginning kit (additional cameras are sold separately). With just a few clicks of a screwdriver, you can mount it exactly where you want it. The Wyze app’s friendly step-by-step directions make DIY setup a breeze. Battery-operated and cordless It can be mounted anywhere and left there indefinitely. On a single charge, two 2,600mAh batteries can provide up to 6 months of power life. Smart security A PIR sensor that detects body heat can alert you to movement. In the Wyze app, you can create unique detection zones. campus has the ability to detect people and packages. 1080P, IP65 weather resistance

What’s in the box?

• Wyze Cam Outdoor: x1
• Base Station: x1
• Base Station Power Adapter: x1
• Base Station Ethernet Cable: x1
• Camera Charging USB Cable: x1
• Quick Start Guide: x1
• Screw Assembly: x1

SETUP

1. Download the Wyze app and create an account.
   
2.  Follow the Wyze app to set up the base station.
   
3. Follow the Wyze app to set up the camera.
   
4. Follow the instructions in the Wyze app to mount the camera.

1. SYNC Button
2. MicroSD Slot (MicroSD card not included)
3. Reset
4. USB Charging port
   
5. Power Input
6. LAN Port
7. Status Light

1. Light Sensor
2. Lens
3. Microphone
4. Removable Magnetic Mounting Base
5. On/Off Switch USB Charging Port
6.  Status Light
7. SYNC Button
8. MicroSD Slot (MicroSD card not  included)
9. Mounting Hole

• Power Adapter
  
• Camera Charging USB Cable

• Ethernet Cable
• Screw Assembly

Wall Mounting

Ceiling Mounting

LIGHT INDICATIONS

Base Station

• Solid yellow light
  The device is powered on and initializing
• Flashing yellow & blue lights
  The device is paired with the camera
• Flashing blue light
  The device is connecting to the network
• Solid blue light
  The device is working properly

Wyze Cam Outdoor

• Solid yellow light
  The device is powered on and initializing
• Flashing yellow & blue lights
  The device is paired with the base station
• Flashing blue light
  The device is connecting to the network
• Solid blue light
  The device is working properly
• Flashing red light
  The device is charging
• Solid red light
  The device is fully charged
• No indicator light
  The device is powered off or sleeping

Precautions:

1.  Prolonged direct sunlight can heat the inside of your camera past its maximum operating temperature of 122°F (50°C). Avoid direct sunlight where possible and only use your camera in environments within its operating temperature range: -4° to 122°F (-20° to 50°C).
2.  To charge your camera, plug the included micro USB cable into the USB port on your base station and connect it to your camera. Or use a power adapter and cable that will provide 5V/2A power.

FCC Warning:

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISEDC RSS warning :
This device complies with ISEDC licence-exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

ISEDC Radiation Exposure Statement:
This equipment complies with ISEDC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. by the party responsible for compliance could void the user’s authority to operate the equipment. Tous changements ou modifications non expressement approuvé par la partie responsable de la comformité peut annuler l’authorite de l’utilisateur a opérer l’équipement.

CONTAINS A LITHIUM ION BATTERY

Do not improperly dispose or discard. Lithium-ion batteries should be recycled. For information on how you can recycle the product at no cost, visit wyze.com/recycle.

NEED HELP?

• Tutorial Videos
  www.youtube.com/wyzelabs
• Troubleshooting & FAQs
  support.wyze.com
• Join Our Community
  https://wyze.com/community
• Contact Us
  https://support.wyzecam.com/
  1-844-WYZECAM

Frequently Asked Questions

• What is the range from the base?
  I have 7 of these cameras on a site where we have 11 short-term vacation rental cabins – the site is 1 acre and I have the 7 cameras scattered about and all work great. Some are 100′ from the base stations. Love these cameras.
• Need knew the electric cord for my Wyze cam?
  You can use any cord type. I bought some longer cords to plug mine in outside and they work fine.
• How does it connect to WiFi/internet?
  The Wyze Cam Outdoor uses the Base Station for both setup and connectivity purposes and can connect to up to four (4) Wyze Cam Outdoor devices at a time. The Base Station requires a router with an Ethernet port to set up and operate.
• what type or size of batteries fits inside?
  It has a Non-replaceable battery.
• Do these have issues with lag time?
  It’s a couple of seconds behind when you are on wifi this is normal
• What if I don’t have the base station then what?
  I’m sure the base station is needed for live view and on-site additional recording storage.
• Do the outdoor ones still have sd card slot?
  yes
• When will the Wyze app be available on the Amazon app store? seems strange that it is not. i need to use my fire tablet with the camera?
  It is available now.
• Can I view the camera in real-time from my phone ?
  Yes, you can always view the live stream on your Wyze app.