Learn how to correctly install and then use your Hunter 44155c/44157 Thermostat using this handy manual. Inside of it is guides on the various screens, buttons and the symbols that you may see pop up during your usage of it.
Manufactured by Hunter
Hunter 44155c / 44157 Thermostat Installation and Operation Manual
Set and Save programmable Thermostat
Congratulations!
Thank you for choosing a Hunter programmable thermostat. Your new Hunter thermostat will provide years of reliable service and year-round energy savings.
Please read this manual before beginning installation and save this booklet for complete operation instructions.
IMPORTANT INFORMATION
This thermostat is designed to work on the following heating and cooling systems:
- Gas – Standing Pilot
- Gas – Electronic Ignition
- Gas – Fired Boilers
- Gas – Milivolt Systems
- Oil – Fired Boilers
- Oil – Fired Furnace
- Electric Furnace
- Electric Air Conditioning
- Single Stage Heat Pump – No auxilary
This thermostat is not designed for multi-stage heat pump systems or 110/220 V baseboard heating systems.
If you are unsure what kind of heating and cooling system you have, please contact a qualified HVACTechnician for assistance.
TOOLS
This thermostat includes two #8 slotted screws and two wall anchors for mounting.
To install your new thermostat, you will need the following supplies:
- Flat-head screwdriver
- Small Phillips-head screwdriver
- Hammer
- Electric drill and 3/16” bit
- Two 1.5 Volt (AA) size alkaline batteries
