Manufactured by Hunter
SETTINGS
The default setting of the thermostat is Fahrenheit (F).
NOTICE: CHANGING THIS SETTING WILL RESET THE THERMOSTAT TO FACTORY DEFAULT PROGRAMS.
(If no button is pressed for 5 seconds, the unit will return to the Normal Display mode.)
To change to Celcius (C):
- Press and hold the Up button.
- Use a paperclip to press the Reset button.
- Continue to press the Up button, but release the Reset button when the LCD turns on.
To reset the unit to Fo, press only the Reset button.
The default for this thermostat setting is in a 12 hour format. You can change the format to 24 hour format by pressing Day/Time and then Program.
The AM/PM indicator will be off when the thermostat is in 24 hour mode.
Setting day and time:
- Press Day/Time. (AM/PM and current hour will flash)
- Press Up or Down to adjust the setting.
- Press Day/Time again to adjust the minute setting.
- Press Day/Time again to adjust the day of the week.
- Press Day/Time to return to the normal display.
You may also press Hold/Return at any time to return to the normal display.
