Page 3 of 6
« Previous Next »
Filling the Clean Water Tank
- Remove the Clean Water Tank by lifting straight up and away from the machine.
- Unscrew the cap at the bottom of the tank.
- Fill with hot (140°F/60°C MAX) tap water to the WATER line. Do not use boiling water. Do not heat water and/or tank in the microwave.
- Add BISSELL formula to the FORMULA line.
- Replace and tighten the cap.
- Replace the tank on the machine until it “clicks” into place.
Cleaning Your Carpet
For additional carpet cleaning tips, head to support.BISSELL.com.
Tips Before Cleaning
- If cleaning an entire room, consider moving your furniture to another area.
- Use a dry vacuum cleaner over area before using your deep cleaner.
- Remove any large, solid debris before wet cleaning.
- Pretreat stains with BISSELL® Pretreat to improve performance on coffee stains and ground-in dirt.
- Plug into a proper outlet.
- Turn the machine ON by pressing the power switch.
- Step on the recline pedal located below the power switch, and pull back on handle to recline.
- Make cleaning passes as described below. Repeat these passes until solution being pulled up appears clean. Empty the Dirty Water Tank and refill the Clean Water Tank as needed.
1. Hold Spray Trigger
• 1 pass forward
• 1 pass back
2. Release Spray Trigger
• 1 pass forward
• 1 pass back
Page 3 of 6
« Previous Next »
[View Manual Contents]
