Page 5 of 6
« Previous Next »
Replacing the Belt and Brush Roll
- Turn OFF and unplug your machine. Use a Phillips-head screwdriver to remove the 3 screws.
- Remove belt cover.
- Pull Brush Roll out and remove belt from track.
- Pull belt off of motor shaft.
- Wrap new belt around motor shaft.
- Put the belt on the Brush Roll track. Put the Brush Roll back into position.
- Align Brush Roll mount to screw post.
- Reposition belt cove.
- Reinstall 3 screw.
WARNING To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting.
Storing Your Machine
Store your machine in a protected, dry area. When finished using the product, wrap cord around cord
wrap for storage.
NOTICE: To reduce the risk of a leaking condition, do not store machine where freezing may occur.
Damage to internal components may result.
Page 5 of 6
« Previous Next »
[View Manual Contents]
