Product view
Assembly
Your Steam & Sweep assembles quickly and easily. The only tool you will need for assembly is a Phillips head screwdriver.
Your Steam & Sweep is packaged with the following items:
- Handle Assembly
- Lower Body with Water Purification System
- Maneuverable Swivel Head
- Removable Water Tank
- 1 large Phillips Head Screw
- 1 small Phillips Head Screw
- 2 Mop Pads
Attach handle to Steam and Sweep
- Attach lower body to maneuverable swivel head (If your Steam & Sweep came with the swivel head already assembled to the body, you may skip this step).
- Secure maneuverable swivel head with small Phillips head screw. Tighten until secure.
- Slide handle assembly down into lower body until it will go no further.
- Secure the handle by placing the large Phillips head screw through the screw opening in the lower body and into the rear of the handle assembly. Tighten with the screwdriver until secure.
- Slide water tank onto lower body by lining up vertical glides and gently sliding tank into place.
Steam & Sweep assembly is now complete.
Special Features
Removable water tank
The water tank is located on the back of the Steam & Sweep. It can be refilled with water at any time during use. Distilled or demineralized water is recommended in place of tap water.
Do not use chemicals with your Steam & Sweep.
Water purification system
This filter removes minerals and other impurities from tap water, preventing water deposits from damaging your Steam & Sweep. It should be replaced when the bright green grains turn blue. To maximize the performance of the filter, distilled water should be used.
Ready light
The ready light will glow when water has been converted to steam and the Steam & Sweep is ready to use.
Steam on-demand trigger
Press to release steam.
Maneuverable swivel head
Allows you to pick up dust and small debris while steam cleaning your floor. The maneuverable swivel head gets into tight spaces and under cabinets.
Washable mop pads
Reusable microfiber mop pad is machine washable and safe for all hard floor surfaces.
Tip: To prevent damage to the machine, do not attempt to use your Steam & Sweep without water in the tank.
