Sections in this Manual
- Connecting to your Wi-Fi network
- Registering your thermostat online
- Setting the clock
- Setting the fan
- Selecting system mode
- Adjusting program schedules
- Overriding schedules temporarily
- Overriding schedules permanently
- Setting vacation hold
- Setting filter reminder intervals
- Cleaning the screen
- Unregistering thermostat
- Disconnecting Wi-Fi
- Smart Response Technology
- Compressor protection
- Auto changeover
- Setting functions and options
- System setup
- FAQs
- Troubleshooting
- Glossary
- Regulatory information
- 1-year limited warranty
Setting vacation hold
Use this function to suspend the program schedule while you are away for an extended period.
- Press s or t to set the temperature.
- Press s or t to set the time of day you want the schedule to resume on the day you return.
- Press HOLD twice. Hold Until appears.
- Press s or t to select the number of days.
The selected temperature will be maintained 24 hours a day for the number of days you select. After the selected number of days has elapsed, the previously programmed schedule will resume at the time you set.
Note: You can press CANCEL (or SCHED) to resume normal schedule.
Setting filter reminder intervals
If activated during installation, the filter reminder alerts you with a message above the time when it is time to replace your filter.
Press RESET after changing the filter, to restart the timer.
To change the reminder interval:
- Press MORE, then EDIT.
- Press s or t to select the desired interval (in days), then press DONE.
- Press RESET.
- Press DONE to save and exit.
Note: System setting function 0500 governs the filter interval. See “Filter Change Reminder” on page 57.
