Sections in this Manual
- Connecting to your Wi-Fi network
- Registering your thermostat online
- Setting the clock
- Setting the fan
- Selecting system mode
- Adjusting program schedules
- Overriding schedules temporarily
- Overriding schedules permanently
- Setting vacation hold
- Setting filter reminder intervals
- Cleaning the screen
- Unregistering thermostat
- Disconnecting Wi-Fi
- Smart Response Technology
- Compressor protection
- Auto changeover
- Setting functions and options
- System setup
- FAQs
- Troubleshooting
- Glossary
- Regulatory information
- 1-year limited warranty
Disconnecting Wi-Fi
If you disconnect the thermostat from your Wi-Fi network (for example, you’re replacing your router):
- Enter system setup (see page 51).
- Change setting 900 to 0 (see page 58).
The Message Center will display Wi-Fi DISCONNECTED for 1 minute.
After that it will display Wi-Fi SETUP.
Re-connect to a Wi-Fi network by following the steps on page 26.
Smart Response Technology
This feature allows the thermostat to “learn” how long the heating/cooling system takes to reach programmed temperature settings, so the temperature is reached at the time you set.
For example: Set the Wake time to 6:00 am, and the temperature to 70°. The heat will come on before 6:00 am, so the temperature is 70° by 6:00 am.
Note: System setting function 0530 controls Smart Response Technology. See “Smart Response Technology” on page 57.
The message “Recovery” is displayed when the system is activated before a scheduled time period.
