Page 3 of 7
« Previous Next »
Pairing
Get Paired
The first time you power on your headset, it begins the pairing process.
- Wearing your headset, power it on. You hear “pairing” and the headset indicator lights flash red and blue.
- Activate Bluetooth® on your phone and set it to search for new devices.
• iPhone® Settings > Bluetooth > On*
• Android™ > Bluetooth: On > Scan for devices*
NOTE *Menus may vary by device. - Select “PLT_Legend.”
If necessary, enter four zeros (0000) for the passcode or accept the connection.
Once successfully paired, you hear “pairing successful” and the headset indicator lights stop flashing.
NOTE To enable caller name announcement, allow access to your contacts if your phone prompts you.
Pair another phone
After pairing your headset to your phone you may want to pair another or new phone.
- Switch on your headset then choose:
• Tap the Voice button and say “Pair mode,” or
• Press and hold the Call button until you hear “Pairing” - While the headset LEDs are flashing red and blue, activate Bluetooth® on your phone and set it to search for new devices.
- Select “PLT_Legend.” If your phone asks, enter four zeros (0000) for the passcode or accept the connection.
- Once successfully paired, LEDs stop flashing red and blue and you hear “pairing successful.”
NOTE : To enable caller name announcement, allow access to your contacts if your phone prompts you.
Page 3 of 7
« Previous Next »
[View Manual Contents]
